wm used for sale

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1 2120 HSS / Co TGL 29-8002 bore Ø 22 mm New Dimensions: 50 x 50 x 32 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1 2076 HSS / Co TGL 29-8002 bore Ø 22 mm New Dimensions: 50 x 50 x 32 mm

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 315 mm -Passage: Ø 104 mm -Weight: 44 kg

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1 1605 HSS / Co TGL 29-8002 bore Ø 22 mm New Dimensions: 50 x 50 x 32 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Admission thread: M20 -Pitch: 2.5 mm -Weight: 32 kg

hob, gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1,25 1864 HSS / Co TGL 29-8002 bore Ø 22 mm New Dimensions: 50 x 50 x 32 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Rezess: Ø 210 mm -Throughout: Ø 80 mm -Weight: 20.7 kg

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 4 2233 HSS / Co TGL 29-8002 bore Ø 32 mm New ! Dimensions: 90 x 90 x 88 mm

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper: 8 -Thread: M30 -Pitch: 1.5 mm -Weight: 38.5 kg

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS) Type K Module 2 2109 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 62 x 62 x 48 mm

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size O 200 mm -Through hole O 54 mm -Short cone 6 -according to pictures, without additional accessories -Weight 14.4kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

hob, gear cutter for hobbing machine WMW / PWS Type K Module 2 2503 HSS / Co TGL 29-8002 bore Ø 27 mm unused ! Dimensions: 62 x 62 x 48 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 605 HSS / Co TGL 29-8002 bore Ø 27 mm New ! Dimensions: 63 x 63 x 48 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Through hole: Ø 54 mm -Short taper: 5 -Hole circle: 105 mm -Weight: 16.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Thread recording -Through hole: Ø 53 mm -Weight: 19.7 kg

hobs, sprocket hobs WMW / PWS ( WMW/PWS ) type BP II ( BPII ) chain pitch 9,25 rollers Ø 5 mm 9317 HSS / Co bore Ø 27 mm New ! Dimensions: 70 x 70 x 57 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Short taper mount for: bayonet mount -Cone size: 6 -Cone: Ø 106 mm -Hole circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -recess recess: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type A Module 1,5 351 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 85 x 85 x 40 mm

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -centrically exciting: -Passage: Ø 54 mm -Weight: 15 kg

3-jaw chuck, three-jaw chuck ROTO RECORD EF 250 Outer Ø: 250 mm bolt circle Ø : 225 mm bore: 80 mm height with jaws: 140 mm Clamping process via rotatable base plate ! with interchangeable jaws ! used, tested ! Dimensions: 250 x 250 x 140 mm

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes: from a WMW boring mill -Travel: approx. 1200 mm -Mounting plate width: 1405 x 1250 mm -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg

3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 Outer Ø: 475 mm bolt circle (flange) Ø: 172 bore Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 195 mm max. 800 rpm used, tested ! Dimensions: 475 x 475 x 195 mm

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW TGL 30-2312 outer Ø: 200 mm bolt circle Ø : 150 mm flange Ø : 180 mm height with jaws: 153 mm jaws individually adjustable by toothing ! used, checked ! Dimensions: 200 x 200 x 250 mm

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -one set: hard interchangeable jaws -Passage: 81 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Weight: 19 kg

Alignment pin set WMW D 45 ( D45 ) 751 82 453 10 SK 45 spigot: Ø 40 mm Dimensions: 177 x Ø 58 mm Set consists of 2 pieces ! New ! Dimensions (packaging): 260 x 120 x 90 mm

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

Tool holder, reducing sleeve for MK tools WMW C 45 x 5 x 185 ( C45x5x185 ) TGL 27260 SK 45 Tool: MK 5 Dimensions: 268 x Ø 80 mm New ! Dimensions (packaging): 290 x 120 x 110 mm

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Turning tool, special accessories WMW TGL 32680 ( TGL32680 ) TGL 30-1201 Shaft: Ø 20 mm Adapter: Ø 8, 10, 12 mm in wooden box used, tested ! Dimensions: 185 x 120 x 60 mm

Swivel lining, 3- cheek lining -Type: DHB 200x3x5 TGL 30 2332 -Feed size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 Rpm -Short cone recording: Ø 105 mm -Weight: 24 kg

Reamers, twist drills, drill bits -Twist drill: different sizes on request -different producers -Price: Ø 10 - 30 mm EUR 0.50/mm (drill Ø 20 mm = EUR 10 net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two knife trimmers -Diameter: 10-80 mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Cutter mandrel, tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Ø 139 mm -Hole circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Rezess: Ø 230 mm -Hole circle: Ø 200 mm -Number: 2x available -Price: per piece -Weight: 35 kg

Cutter mandrel, tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm

Milling machine, universal milling machine, tool milling machine -Clamping table: 1600 x 400 mm -Travel: X/ Y/Z 1100/400/400 mm -electric tool clamping: -Spindle mount: SK50 -Quill stroke: 100 mm -Speeds: from 28 to 1400 rpm -Coolant device: -Dimensions: 2100/2320/H2700 mm -Weight: 4000 kg

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Cutter mandrel, tool holder, with tightening thread WMW 4 x 30 x 100 ( 4x30x100 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 30 mm New ! Dimensions: 325 x 50 x 50 mm

Tapping chucks, thread chucks, tapping chucks -Transfer in current condition as seen -Threading chucks without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Number: 1x tapping chucks available -Weight: 13 kg