wm used for sale

Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: WMW, live centering tip, 2 pieces -Type: ZN 205 -Recording: MK5 -Price/Sale: complete -Overall dimensions: 270/190/100 mm -Weight: 10 kg

Hob, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0233 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 79 x 79 x 71 mm

Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 0093 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible.

fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0144 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK4 -Number: 17x centering tips available -Price per piece -Dimension: Ø 33/160 mm -Weight: 0.8 kg/pc.

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point flattened -Intake: Morse taper MK5 -Number: 1x centering tips available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.8 kg/pc.

Hob, tooth gear hob for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0630 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 78 x 78 x 71 mm

frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK3 -Number: 12x centering tips available -Price per piece -Dimension: Ø 25/125 mm -Weight: 0.3 kg/pc.

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW ABW Live center -Type: ZN 203 -Intake: MK3 -Number: 11x center point available -Price per piece -Total dimensions: Ø 54 x 167 mm -Weight: 0.9 kg/pc.

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 0140 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 63 x 63 x 48 mm

max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1800 mm table load: 12,5 t total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power ...

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS2 / MS2a -Recording: MK2 -Quantity: Front dimension 4x Ø 22 mm / 3x Ø 25 mm -Price: per piece

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1.5 1454 HSS / Co TGL 29-8002 Bore Ø 22 mm New !' Dimensions: 54 x 54 x 38 mm

range L-W-H: 1350 x 485 x 950 mm weight: 107 kg : 7 St. Professional tool trolley with wooden top. Overall dimensions 135 x 48.5 x 95 cm. Internal dimensions of the top 4 drawers 690 x 395 x 60 mm. Internal dimensions of the 5th La 1100 x 395 x 60 mm. Internal dimensions of the 6th and 7th drawers 1100 x 395 x 100 mm. Internal dimensions of the shelf behind the door 420 x 440 x 350 mm. Drawer opening 90% Wheel dimensions 150 x 40 mm. Solid wood panel thickness 40 mm. Packaging dimensions 124 x 55 x 81 cm. Weight 107kg. 2 x Separate lock for drawers and door. 8 x blue storage compartments in the bottom 2 drawers. Door with magnetic closure. Non-slip mat in each drawer. Solid ball bearing slides. (double bearing) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Fixed centering tip: Ø 65 mm -Mount: Cone Ø 30/35 x 64 mm -Number: 3x centering tips available -Price: per piece -Dimensions: Ø 65 x 130 mm -Weight: 1.2 kg/pc.

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Spindle head: Spindle tool for table boring mills, plate boring mills, tilt adjustable -Stroke: 225 mm -Shaft: Ø 50 mm -Dimensions: 330/170/H415 mm -Weight: 48 kg

Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Measuring range: 35-60mm -Dimensions: 115/450/H60 mm -Weight 1.6kg

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 4 2233 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 90 x 90 x 88 mm

max. dia. of grinding wheel: 150 mm grinding wheel width: 25 mm taper diameter: 32 mm connected load frequency: 230 V engine output: 0,5 KW weight: 16 kg dimensions: 0,5 x 0,26 x 0,22 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS) Type K Module 2 2109 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm

table length: 1200 mm table width: 800 mm table height: 900 mm table load: 2000 Kg weight of the machine ca.: 0,24 t dimensions: 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1560 mm width: 760 mm height over floor: 880 - 920 mm weight: 70 Kg Workbench with drawer block Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hobs, tooth gear hob for hobbing machine WMW / PWS Type K Module 2 2503 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm

table length: 2900 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,9 t dimensions: 2,9 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant tank: 16 l connected load frequency: 230 V Motor capacity: 90 Watt weight of the machine ca.: 11 Kg dimensions: 380 x 250 x 380 mm Complete coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 605 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 63 x 63 x 48 mm

sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 63 mm -Recording: see photos -Total dimensions: Ø 80 x 235 mm -Weight: 3.5 kg

Hobs, sprocket hobs WMW / PWS ( WMW/PWS ) Type BP II ( BPII ) Chain pitch 9,25 rollers Ø 5 mm 9317 HSS / Co Bore Ø 27 mm New !' Dimensions: 70 x 70 x 57 mm

bore capacity in steel (diameter): 20 mm throat: 180 mm bore stroke: 82 mm turning speeds: 220 - 2840 U/min : 290 x 290 mm total power requirement: 0,55/0,75 kW / Volt weight of the machine ca.: 54 Kg dimensions: 820 x 500 x 290 mm CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 1250 x 535 x 845 mm weight: 74 kg : 1 St. Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x robust handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball bearing guides. (Double bearing) The drawer can be opened 100% Dimensions of the drawer 108 x 410 x 14 cm. Load capacity of the drawer 30Kg. Dimensions of the doors 520 x 460mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 65 mm -Number: 7x centering tips available -Price: per piece -Recording: see photos -Total dimensions: Ø 74 x 220 mm -Weight: 2.9 kg/piece

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, thread quick-change chuck SK40 Ovp -Type: WFLK2/ISO40 M16 Ø12X 9 -Dimensions: Ø 62 x 192 mm -Weight: 2.0 kg

Hobs, tooth gear cutters for hobbing machine WMW / PWS ( WMW/PWS ) Type A Module 1.5 351 HSS / Co TGL 29-8002 Bore Ø 27 mm New ! Dimensions: 85 x 85 x 40 mm

: 8 St. range L-W-H: 710 x 510 x 900 mm weight: 60 kg Drawer cabinet with 7 drawers Drawer dimensions 600 x 435mm Drawer height: Load 1 - 7, 81mm Load 8, 173mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK40 -Type: ISO40H70ER40 -Clamping sleeve: Ø 14-13 mm -Total dimensions: Ø 63 x 160 mm -Weight: 1.5 kg