wire used for sale

wire electrode, welding wire, welding wire -Cored wire: Fluxofil 31 -Diameter: 1.6mm -Dimensions: O 300/100 mm -Weight complete: 15 kg

wire electrode, welding wire, welding wire -Cored wire: Carbofil 1 -Diameter: 1.6mm -Price: per roll - Quantity: 2 pieces -Dimensions: O 300/100 mm -Weight per roll: 15 kg

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Control: Makino Generator: MGW-R Max.travel range: X 600 mm Y 400 mm Z 250 mm U x V axis travel +/- 75 mm Work tank dimensions: 920 x 600 mm Dialectric tank capacity: 900l Made in Japan

wire electrode, welding wire, welding wire -Type: AWS A5.18 ER 70 S-6 -Diameter: 0.8mm -started role -Weight complete: 4.2 kg

Key data: 320 mm, 220 mm, 180 mm

Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg

Control: Makino Generator: MGW-R Max.travel range: X 600 mm Y 400 mm Z 250 mm U x V axis travel +/- 75 mm Work tank dimensions: 920 x 600 mm Dialectric tank capacity: 900l Made in Japan

Wire electrode, SG2 welding wire, welding wire -Böhler: EMK 6 D -AWS. ER70S-6 -Wire thickness: 0.8 mm -Price: per piece -Quantity: 2 pieces -Weight: 15 kg

One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet

Wire Electrode, Stainless Steel Welding Wire, Welding Wire -Big roll - Wire Thickness: 1.2mm -Wire electrode: highly alloyed, chemically resistant -Number: 4x rolls available -Price: per package -Weight: 12kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm -Rope length: approx. 14000 mm -Cable length: 4500 mm -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg

Control: Sodick Max.travel range: X 600 mm Y 400 mm Z 350 mm U x V axis travel 150 x 150 mm Work tank dimensions: 1050 x 710 mm Dialectric tank capacity: 800l Made in Japan

Automatic punching machine for Wire-O and more Make JBI - Lhermite Model Lhermite EX610 Year 1985 Minimum size 90 x 110 mm Maximum size 530 x 610 mm Capacity up to 2.5 mm thickness depending on materials Speed up to 8.400 cycles per hour, depending on size and materials Tools Wire-O 3:1 with square holes, platic comb punch, spiral punch, 4 hole punch for ringbinders Video click here

Diameter Capacity 3-10 mm Bending arm lenght 755 mm

Key data: 400 mm, 300 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22606 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: SLC 400 G Premium + Year of construction: 2015 Travel: 400 x 300 x 250 mm [ X x Y x Z ] max. workpiece weight: 500 kg U / V axis: 150 x 150 mm Cutting in a water bath Radiator Working tank 850 x 610 mm Taper +/- 25° at tool height 130 mm Control SPW

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm -Total height: 194 mm -Weight: 20 kg

Key data: 500 mm, 350 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W

Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 25 mm -Number: 3x discs available -Price: per piece -Weight: 1 kg

wire electrode, welding wire, welding wire -Metal powder: - Cored wire -Net weight: 15 kg -Number: 28x packages available -Price: per package -Weight: 15.6kg/package

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available -Price: per package -Weight: 7.6kg/package

One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

wire electrode, welding wire, welding wire -Net weight: 9 kg -Number: 1x packages available -Price: per package -Weight complete: 9.5 kg/package

Hohner Orion 4 wire stitching machine; cleaned and tested; 3 stitching heads 70/20 with coarse tool; Max. Staple thickness 20mm; Clamp spacing 70-550mm; Table size 1000x330mm. Wire stitcher Hohner Orion 4; cleaned and checked; three stitching heads 70/20 with tool rough; max.thikness 20mm; distance between heads 70-550mm; table size 1000x330mm.

Cutting table for 36 NF stones. There is equipment for formats 1.4 and 2.1. The cutter only in use for 5 months

wire electrode, welding wire, welding wire -Net weight: 5 kg -Number: 1x packages available -Price: per package -Weight complete: 5.9 kg/package

wire electrode, SG2 welding wire, welding wire -small role -AWS: ER70S-6 -net weight: 5 kg -Quantity: 16x package available -Price: per package -Total weight: 5 kg/package

These used compact and versatile cold rolling line is completely modular and do have two bull blocks and works in addition with modular descalers, lubricant unit, stress relieving device, as well as with a pay-off and horizontal 3 ton spooler

number of stapling heads: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire electrode, welding wire, welding wire -metal powder -cored wire -Net weight: 15 kg -Number: 87x packages available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 26x package available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x package available -Price: per package -Weight complete: 7.6 kg/package

Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -Net weight: 7 kg -Quantity: 1 package available -Total weight: 7.6 kg

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD - Type of EDM : WIRE - Max. workpiece weight: 200 kg

Wire Stiching Machine Polygraph 703 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package -Weight complete: 11.5 kg/package

Used machine in good condition. Available for immediate delivery. - Weight: 2.200 kg - Dimensions (long x wide x high): 1.800 x 1.600 x 2.130 mm - Travel (X x Y x Z): 400 x 250 x 200 mm - Type of EDM : WIRE - Max. workpiece weight: 500 kg

Elektrische Hochleistungs-Schneidemaschine / High Speed Wire Cutting Machine RENZ HSC-E Baujahr / Year 12/2011 - Serial-No. 460007150.50107 Schneideleistung bis / Cutting capacity max. 3000 Stück/h Schneidelänge 3 - 99 Schlaufen, variabel einstellbar Cutting length 3 – 99 loops, variable adjustable Stückzahlzähler ja / Piece counter yes Verarbeitbare Durchmesser / Possible wire diameters 3/16" - 1 1/4" ( 5,5 - 32 mm ) Teilung / Pitch 2:1, 3:1, 4:1 Umrüstzeit von Durchmesser zu Durchmesser / Time required for diameter change 2 - 10 Min. Spannung Power supply / 230 V / 50 Hz Maße / Machine L110 x W82 x H100 cm Gewicht / Weight gross 74kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 1x package available -Weight complete: 15.6 kg

Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 2x package available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 1x package available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 1x package available -Price: per package -Weight complete: 7.6 kg/package

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 400 x 250 x 200 mm - Dimensions (long x wide x high): 1.800 x 1.600 x 2.230 mm - Weight: 2.200 kg - Operating hours: 21.483 - Max. workpiece weight: 1.000 kg - Max. workpiece weight: 500 kg - Control: CHARMILLES

Inv. Num. : 8067 Type: WWD30-10 Producer: ZT Italy Created: 2021 Parameters: Maximum Inlet Diameter: 3.3 mm Minimum Outlet Diameter: 0.55 mm Maximum output diameter: 1.05 mm

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -PVC coated -Length: approx. 50 m -other crane ropes are also available -Weight: 6 kg

Glass silk nickel stranded wire, cable stranded wire -Type: 1.5 mm² -Wire: 1 -Length: 100 m -Weight: 2 kg

Drahtheftmaschine - Wire Stitching Machine Polygraph 103 Serial-No. 6875 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Diameter Capacity 3-10 mm Bending arm lenght 755 mm

wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308LSI Ø 0,8 mm -Dimension: Ø 300/100 mm -Weight roll: 5.9 kg

wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308LSI Ø1.0mm -Dimension: Ø 300/100 mm -Weight roll: 2.7 kg