wire welding used for sale

table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mm table load: 0,5 t swivelling range: 0 - 135 Grad turning speeds: 0,2 - 3 U/min height adjustment: 400 - 900 mm boring diameter: 100 mm welding current: max. 500 Ampere total power requirement: 0,75 kW including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,261 t dimensions: 1,2 x 1,2 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Schwalbach high-frequency welding system for dielectric heating for the glass industry is available. Connected load: 17kVA, generator output: 7kW, frequency: 2712MHz, transmitter tube: 2xTB6/4000, high voltage: 7000V DC, overload cut-off from: 2100mA. Documentation available. On-site inspection is possible.

table diameter: 700 mm table load: 0,6 t swivelling range: 0-90 Grad excentricity: 200 mm table turning speeds: 0,2 - 2 U/min Torque: max. 900 N/m total power requirement: 0,37 kW dimensions of the machine ca.: 1,1 x 0,92 x 0,8 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...

An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.

table diameter: 560 mm table load: 0,3 t swivelling range: 0-90 Grad table turning speeds: 0,25 - 4 U/min Torque: max. 360 N/m centre of gravity: max. 150 mm total power requirement: 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-H ...

Offer 24587 Specifications: - Electrostatic filter with indicator light - Extracted and purified air is returned to the working area - Wall-mounted design with two articulated extraction arm - Articulated suction arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter area 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item  ...

Offer 05394 Specifications: - BIA tested sweat extraction device - Joint extraction arm 3000 mm - Air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - Filter area approx. m² - Filter control - light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit

A railing welding device (railing welding jig) Förster is available. Component weight: 300kg, turning radius: 360°, axle height: 1000mm, max. incline: 60°, railing height: 600mm-1200mm, max. profile dimensions X/Y: 80mm/40mm, max. profile diameter: 80mm, machine dimensions X/Y: 5000mm/1200mm. Documentation available. On-site inspection is possible.

HF welding machine with sliding table - 1.1 KW

HF Welding Machine with Sliding Table

Rated power: 63 kVA Projection: 520 mm Electrode arm spacing: 200 mm Welding capacity steel: approx. 7 + 7 mm Welding performance of non-ferrous metals: approx. 2 + 2 mm electr. Connection: 380 V kW

Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Welder Manufacturer: Merkle Type: HighPulse 552 RS Year of Make: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off fuse

PROGRESS MESH WELDING M-System Evolution Model 2012 M25576 • MMR – Straightening Machine Model 2012 • SWR – 6 Welding Heads Model 2012 Max mesh size: 3.5 m width and 9.0 m length Cross & length wires diameter: 6, 8, 10, 12, 16mm Mesh characteristics: Width: up to 3,500mm, Length: up to 9,000mm Min. Width: 500mm, Min. Length: 1,000mm Max. Bar Length: 9,000mm, Min. Bar Length: 500mm Bar Length Tolerance: +-5mm, Bar Placing Accuracy: +- 10mm Crosswire Diameter: 6, 8, 10, 12 and 16mm Line Wire Diameter: 6, 8, 10, 12 and 16mm Bar on Bar Welding: 12mm on 12mm Placement Angle of Bars: 0° or 90° Minimum Flying End Length: 25mm A Bar must have at least two welding nodes Only one Bar per receiver is permissible Standard centres: Cross Wires: Infinetely variable (minimum 35mm) Line Wires: Multiple of 25mm Minimum Centres: Cross Wires: 25mm Line Wires: 25mm  ...

Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm

Manufacturer: Eckert Model: Jantar Year of Manufacture:2010 Table size: 3x6 meters 2 Hypertherm XPR 120A high-definition plasma cutting heads Pipe cutting attachment Exhaustor system One plasma source has had parts removed and requires replacement components. The machine is fully operational with one cutting head. Find more here - / Contact us at -

Two identical Yaskawa robots are available for the welding process. Payload: 6kg, reach: approx. 1350mm, axes: 6, repeat accuracy: +/-0.08mm, weight: approx. 130kg. An on-site inspection is possible.

ampere: 330 A : mit Kabel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50Identical to CEBORA ash. No. 244311 Year of construction approx. 1992Power 50 Amp. = 35 % ED 30 Amp. = 100 % EDEsetting range 2 stagesHose package length approx. 6 metersCompressed air connection 4.7 barMains connection 400 Volt, 50 Hz, 32 Amp. PlugSpace required L x W x H 500 x 350 x 700 mmWeight approx. 80 kgGood condition; used

Straightening and welding plate steelMilled steel plate with good surface, heavy straightening plateLength 1900 mmWidth 1500 mmThickness 70 mm continuous machined surface, surface milled- plate provided with some symmetrical holesWeight approx. 1600 kggood conditionHeight-adjustable feet made of cast steel can be found in our shop; used

Welding Fume Extraction, Soldering Suction, Laboratory SuctionHigh Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 DSerien. No. 2902619 year of construction 2004Device air volume flow max. 250 m3/hMinimum air volume flow min. 100 m3/hSeparation efficiency 99.97 %Welding fumes class W3Motor power approx. 0.75 kWNet connection 230 volts, 50 Hz- extraction power infinitely adjustable- 2 pieces extraction connections 45 mm- mechanical air filter (used)- mobile base with 4 fixed castors,

MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;

Welding fume extraction for wall mounting, extraction unit KEMPER type 85400Fabr. No. 279092 built in 1997Volume flow rate 1700 m3/hstat. Pressure 2000 PaSuction connection 250 mmEngine power 1.5 kWNeergized connection 400 Volt, 50 Hz- Centrifugal fan- Designed for a mechanical air filter with approx. 99% separation efficiency- Main filter defective, (surcharge for new main filter, 195,-- EUR net)- Joint suction pipe 150 mm, approx. 2 meters long- Suction pipe with 3 joints and suction funnel (adapter connection to the filter housing is missing)-

TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC)TIG Welding MachineFabr. No. 0507214 Year of construction 2007Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% EDLight electrode 180 Amp. = 50% EDNew connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine- stepless power adjustment- 2 stroke and 4 stroke operation- HF ignition- Pulse welding mode- Rod electrode operating mode- Water cooled- 8 meter TIG hose package with hand torch-

Peco Welding Machine Spot Welding Machine Peco welding system welding of flat strip and electr. Management Peco LA 40 Air Control Bosch E35... DYF welding control You can find more welding systems in other sizes - new and used - in our shop! International shipping costs on request!

A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible.

KAWASAKI BA006L-A robotic welding station was built in 2022. This system, composed of devices and machines with the best technical parameters, is the perfect choice for fully automatic arc welding using the MIG/MAG method. All the components of the station are integrated inside an enclosed structure. The machining process is performed by a KAWASAKI 6-axis robot distinguished by, among others, its sophisticated design and robust arm with an increased range of movement. In order to achieve excellent dynamic movements combined with high process reliability, each of its six axes is driven by efficient servo motors. What’s more, a number of state-of-the-art systems ensure uninterrupted operation of the machine, without any downtime. The entire workspace is ventilated from welding fumes by powerful KEMPER extraction units. This solution significantly improves overall safety and comfort ...

KAWASAKI BA006L-A robotic welding cell was built in 2021. The system is designed for fully automatic MIG/MAG arc welding. All the necessary equipment and machinery with the best technical specifications are integrated inside an enclosed, fully ventilated structure. The robotic welding station consists of the following components: – robot arm: KAWASAKI 3BA006L-AC01 – welding positioner: ASTOR PST250E-H1 (2 pcs.) – MIG/MAG welder: FRONIUS TPS 400i – wire feeder: FRONIUS WF 25i REEL R /4R/G/W – push-pull drive unit: FRONIUS WF 60i Robacta Drive CMT/W – cooling unit: FRONIUS CU – welding fume extraction unit: KEMPER FilterCell XL (2 pcs.) – light curtains: SICK – fixed covers with safety switch The machining process is performed by a KAWASAKI 6-axis robot, distinguished by its sophisticated design and robust arm with an increased range of movement. It coopera ...

A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.

MOST MWOS-A5 tank welding machine was built in 2023 in Poland by RYWAL-RHC Sp. z o.o. This highly versatile machine is designed for fully automatic welding of industrial products, i.e. machine parts, pressure vessels and heat exchangers. Circumferential, angle and full-value longitudinal joints are performed by means of two reliable torches in the MIG/MAG method. This solution significantly increases production efficiency, while maintaining the repeatability of the process. All this is complemented by the advanced MCS-X control system with an intuitive interface, which enables the creation of entire production processes in just a few steps. The MOST MWOS-A5v02 circumferential welding machine weighs 3200 kg. Technical specifications of the MOST MWOS-A5 circumferential welding system - working length: 4500 mm - maximum workpiece diameter: 1500 mm - maximum workpiece weight: 5200 kg  ...

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Welding Machine Type: Roll Seam Welding Machine Manufacturer: Nimak Type: NMP 7/100 Year of Make: 1971 Machine No. 71059 Rated power: 100 kVA at 50% ED Connected load: 175 kVA Primary voltage: 380V Open circuit voltage: 7.3V Sec. Str. dd/max. 8/33 kA Electrode force: 750 kp Frequency: 50 Hz up to 8.8 V at 6 ATU All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Key data: 63 kp, 750 , 600

Rated power at 50%ED: 63kVA Short-circuit current: 26.3kA Electrode force: 65-390daN / single stroke Throat: 450-750mm --- Welding control: MPS 15036 (5 times, 1 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Key data: 40 kp, 550 , 390

Rated power at 50%ED: 40kVA Short-circuit current: 26.2kA Electrode force: 65-390daN / single stroke Throat: 250-550mm --- Welding control: MPS 10 (5 times, 8 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Key data: 25 kp, 150 , 120

Rated power at 50%ED: 25kVA Short-circuit current: 12kA Electrode force: 120daN / single stroke Projection: 150mm --- Welding Control: AR.01 (5 times, 2 program) --- Incl. additional options: -Foot switch -Main switch - Mounted on aluminium plate --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Spot welding gun --- Rated power at 50%ED: 22kVA Short circuit current: 17kA Electrode force: 360daN / single stroke Projection: 95mm --- - Electrode arm AE/2/96g + C34/2/63g --- Welding control: on request --- Spring balancer on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: ARO Type: M 302 Year of Make: 1971 No. 1063655 380 V ~ 50/60 Hz E 100 100 All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment