wire erosion used for sale

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.

This 5-axis CHARMILLES TECHNOLOGIES Robofil 290P was manufactured in 1999. It features a travel range of 400 mm x 250 mm x 200 mm and can accommodate a maximum workpiece weight of 500 kg with dimensions of approximately 850 x 500 x 200 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES TECHNOLOGIES Robofil 290P machine we have for sale. Contact us for further details.

Capacity: 900 to 3.000 bottles/hour Wirehood: Four-wire closures Bottle height: approx. 235 - 360 mm Magazine capacity: 1.600 corks

CNC wire cutter Type: CUT 200 mS Manufacturer: AgieCharmilles Year: 2013 Control: EDM Expert X: 350 mm Y: 220 mm Z: 220 mm U/V: 350 × 220 mm Max. bevel cutting: 45° Table size: 680 × 450 mm Max. workpiece weight: 750 kg Tub size: 1000 × 550 mm Processing type: Plunge cutting Automatic wire feeding: Yes Wire diameter: 0.10 – 0.30 mm Axis rapid traverse: 3 m/min Dielectric: 200 l Power supply: 380 V / 3 phases Dimensions: 2020 × 2200 × 2015 mm Weight: 2450–3500 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

working direction: left-right, single head. working direction: left-right electrical power supply kW: 420

This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details.

A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible.

Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - / Contact us at -

Machine very well maintained, operating in a clean workshop and used for small-series production. Hard drive recently replaced. Inspection possible.

This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details.

Used industrial machine offered by IBEXTRA.

This 5-axis +GF+ AgieCharmilles AGIECUT PROGRESS V4 was manufactured in 2007. It features a maximum workpiece dimension of 1,300 mm x 1,000 mm x 510 mm and can handle a maximum workpiece weight of 3,000 kg. The machine offers impressive axis travels, including X-axis travel of 800 mm and Y-axis travel of 550 mm. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AgieCharmilles AGIECUT PROGRESS V4 machine we have for sale. Contact us for further details.

Used industrial machine offered by IBEXTRA.

X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible.

This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine.

wire EDM machine, year 2006, CNC W30FAS-2. Used machine in good condition. More info & price on IndustrialBuyer.

CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.

AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring.

3:1 Wire punching and locking system, Stamping tool 3:1, round hole 4 mm, Working width up to 420 mm, Max. stamping capacity per the manufacturer: 30 sheets/80 g/m², foot switch, operation manual, A small palette with 3:1 wire-binding elements is included in the delivery.

wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370

diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200

diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370

diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350

wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950

diameter range 2,2-4,2 mm nail length 13-105 mm output - pieces/min 430

wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800

diameter range 1,8-3,4 mm nail length 13-80 mm output - pieces/min 550

wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420

wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420

diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550

diameter range 2,1-3,1mm nail length 32-51mm output - pieces/min 1600

diameter range 1,8-2,5 mm nail length 32-57 mm output - pieces/min 2000

diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700

diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520

diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550

wire diameter range 10 mm width of band 100 mm feeding length 250 mm

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5

dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm

line wire diameter 1,6-2,8 mm point wire diamter 1,4-2,5 mm output - meter/min 25-38

dia. range 0,5-2,5 mm width of band 50 mm feeding length 170 mm number of slides 5 punching power 5 to output - pieces/min 225

straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m

\" Technical details Manufacturer: Adda Fer Meccanica Type: Multi-wire straightening, feeding and cutting line Function: Preparation of wire for mesh production Build year: Estimated 1985–2000 Automation: Relay-controlled industrial system Quantity: 1 complete machine Configuration: - Multiple wire coil pay-off stations - Wire straightening assemblies - Wire guide rollers - Driven feed roller units - Gear reduction drive systems - Vertical processing tower - Electric drive motors - Control cabinets - Automated wire handling system Application: - Reinforcement wire processing - Welded mesh production - Steel wire straightening - Wire cutting operations - Construction mesh manufacturing - Industrial wire preparation Process function: - Wire decoiling from multiple coils - Wire straightening and conditioning - Automatic wire feeding - Wire length preparation fo ...

\" Technical details Manufacturer: ALMAR Model: GAL-002 (model designation appears from nameplate) Type: Rail-mounted wire feeding and positioning machine Configuration: - Motorized positioning carriage - Rack-and-pinion rail drive system - Linear guide rails - Wire feeding rollers - Guide roller assemblies - Multiple articulated support arms - Wire support and positioning cradles - Wire coil pay-off station - Electrical control cabinet - Automated wire transport system Application: - Wire mesh production - Cross-wire feeding and positioning - Reinforcement mesh manufacturing - Automated wire handling - Wire transport to welding stations - Industrial mesh production systems Function: - Automatic wire positioning - Controlled wire feeding - Rail-guided transport of wire handling assemblies - Integration with mesh welding production lines Construction: - Heavy-d ...

Technical details Manufacturer: Schlatter AG Type: Automatic resistance wire mesh welding and production line Configuration: Wire coil pay-off stations, longitudinal wire feeding system, wire straightening units, cross-wire positioning mechanism, multi-electrode resistance welding section, welding transformers, mesh transport system, output stacking section, auxiliary roller handling and tensioning station, relay-based electrical control cabinets, pneumatic and electromechanical actuation systems. Application: Production of welded wire mesh, reinforcement mesh, fence panels, industrial mesh and construction wire products. Function: Automatic feeding of longitudinal and cross wires, resistance welding of wire intersections, mesh transport, tensioning, flattening and stacking of finished panels. Electrical system: Relay logic control architecture with contactors, transformers and te ...