wire erosion used for sale

Industrial Semi-Automatic High Speed Wire Comb Truss (Wire-o) RENZ AUTOBIND 700 Type AB700 for books, calendars and skip bindings with KAS calendar system for optional calendar hanger and 9 x closing tools e.g. 1/4" - 5/16" - 3/8" - 7/16" - 1/2" - 9/16" - 5/8" - 3/4" Working width 700 mm ( 27.5" ) equipped with 3:1 and 2:1 gears PLC (PLC) controlled, data setting via touch screen (MMi) Automatic despooler and integrated release paper rewinder automatic binding table, programmable for skip, calendar, book and split bindings. Price plus VAT EXW. All information is subject to change. Subject to prior sale. Dealer shop. The sale is made under exclusion of any warranty.

Wire Mesh Trimming System Diameter: 2 - 6 mm possible, 3 versions available Suitable for: Industrial products - to cut the overhangs

Labelling unit Etiquette unit complete wth pneumatics

Manufacturer: Wire Electronik, Type: GNV 451-20/130, Seriennummer: 85957, Frequenzumrichter: yes, Input: 3X 130 Volt, Output DC Volt: 220 V/50-60 HZ,

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

– after technical inspection – made in Poland –DTR TECHNICAL PARAMETERS: Log diameter max. 300 mm log length 500 - 3000 mm motor power 2 x 7.5 kW head spacing manual Feed infinitely adjustable on the inverter wheel diameter 600 mm length of belts 4004 mm Unhooking lines feeder height from the base 810 mm dimensions of the machine (length/width/height): 530 / 200 / 195 cm weight ~ 1200 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 450 mm Width: 400 mm Max. dimensions of work piece: Length: 400 mm Width: 450 mm Height: 300 mm Table load max.: 200 kg Longitudinal traverse (X-axis): 200 mm Cross traverse (Y-axis): 300 mm Vertical travel (Z axis): 300 mm W axis: 230 mm Diameter of electrode wire: from: 0.3 mm up to: 3 mm Voltage 50 Hz 3x: 440 Volt Total power required: 4 kVA Weight total installation approx.: 850 kg Overall dimensions machine: Length: 1390 mm Width: 990 mm Height: 2080 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

control Mitsubishi CNC travel X/Y/Z 500/350/300 mm max. workpiece weight 800 kg table size 780x630 mm

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit

Travel routes: X: 350 mm Y: 500 mm Z: 300 mm Travel (U x H): 200x200 mm FFII Generator Awf Dielectric cooling Water tub X2 Generators

Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

CNC - Control Makino Travel x/y/z 370 mm / 270 mm / 220 mm workpiece dimensions L/W/H 790 mm / 670 mm / 220 mm Wire diameter range 0.1 mm – 0.25 mm workpiece weight 600 kg cone at 100 mm height +/- 15° Mitsubishi - Axle Drives

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Operating hours: 12000 Technical data Working table: Length: 680 mm Width: 450 mm Max. dimensions of work piece: Length: 1000 mm Width: 550 mm Height: 220 mm Table load max.: 750 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 220 mm Vertical travel (Z axis): 220 mm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Max. cutting speed with wire 0.33 mm: 400 mm2/min Total power required: 10 kVA Dielectric aggregate: Contents: 760 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 12 kVA Weight total installation approx.: 2100 kg Overall dimensions machine: Length: 2050 mm Width: 2020 mm Height: 2000 mm Various accessories: Cooling unit for fluttines

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16-W Technical data Max. dimensions of work piece: Length: 650 mm Width: 420 mm Height: 160 mm Table load max.: 250 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 110 mm Vertical travel (Z axis): 180 mm U axis: 120 mm V-axis: 120 mm Rapid traverse:: 900 / 450 mm/min Total volume of dielektric: 260 l Voltage 50 Hz 3x: 400 Volt Total power required: 11 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 2000 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Max. dimensions of work piece: Length: 900 mm Width: 520 mm Height: 270 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 220 mm Vertical travel (Z axis): 270 mm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.25 mm up to: 0.30 mm Overall dimensions machine: Length: 3400 mm Width: 2400 mm Height: 2300 mm

X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)

Key data: 350 _Unknown / Other, 250 Sodick, 220

Longitudinal X: 350 mm Cross Y: 250 mm Vertical Z: 220 mm Ampere: 0 A CNC Brand: _Unknown / Other CNC Model: Sodick Make: Sodick Type: A325 Mark25 Control: Sodick MARK 25 YOP: 1998 U Axis 80 mm V Axis 80 mm X-Axis:                 350mm Y-Axis:                 250mm Z-Axis:                 220mm Table size L x W / or ø:600 x 400 mm Table load:             450Kg Length:                 2.250 mm  Width:                  2.450 mm  Height:                 2.400 mm  Weight:                 3.000 kg 

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A MACH-id     4003 MAKE         Charmilles TYPE           ROBOFORM 200 YEAR          1990 DIMENSIONS Length    3000 mm Width     1600 mm Height    2500 mm

Axis X ... 500mm Axis Y ... 350mm Axis Z ... 300mm workpiece weight ... 800kg Clamping table surface ... 780 x 875mm L x W x H ... 2310x1810x2050mm Machine weight ... 2550kg The price includes CAD/CAM SW Kovoprog.

Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm  Cutting in a water bath Conicity: +/- 15° at 120mm

AGIE CHARMILLES wire cut AC2 VERTEX year `2010

Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm

WE OFFER AN NICE SODICK EDM machine Sodick AG600L Premium year 2011. Control Sodick LP2WH CNC Travels: X:600mm Y:400mm Z:308mm U:120mm V:120mm max. cutting angle: 25deg max. clamping weight: 1000kg max. workpiece size: 1066mm x 726mm x 380mm FOR CUSTOMER WE ORGANIZE AS WELL TRANSPORT

Inv. Num. : 6784 Type: SL 600 Q Producer: SODICK Created: 2014 Parameters: Control System: Fanuc Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 350 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Minimum wire thickness: 0.10 mm Maximum wire thickness: 0.30 mm Maximum table load: 1000 kg Capacity dielectric tank: 850 l Tank dimensions: 1050 x 850 mm Machine height: 2300 mm Machine length: 2635 mm Machine width: 2865 mm Machine weight: 4500 kg

Inv. Num. : 6587 Type: A04B-0239-B032 Producer: Fanuc Created: 1990 Parameters: The machine is in good technical condition.

Inv. Num. : 6949 Type: VL600 Q Producer: SODICK Created: 2015 Parameters: Table length: 1040 mm Table width: 780 mm Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 270 mm Minimum wire thickness: 0.1 mm Maximum wire thickness: 0.3 mm Machine height: 2080 mm Machine length: 2605 mm Machine width: 2620 mm Machine weight: 3140 kg

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Key data: 370 mm, 270 mm, 255 mm

Inv. Num. : 6772 Type: Robocut Alpha OiD Producer: FANUC Created: 2008 Parameters: Control System: FANUC Series 310iS-WA Max. travel length of the X-axis: 370 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 255 mm Max. workpiece dimensions: 700 x 600 x 250 mm Max. workpiece weight: 500 kg

Key data: 320 mm, 220 mm, 180 mm

Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg

Axis X ... 350mm Axis Y ... 220mm Axis Z ... 220mm Machine weight ... 2100kg Max. workpiece weight ... 750kg Max. workpiece length ... 1000mm Max. workpiece height ... 220mm Max. workpiece width ... 550mm The machine is in good condition, possible to test under electricity.

CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg

WE OFFER NICE SODICK MACHINE - TOOLING DEVELOPMENT WORKING HOURS: POWER ON: 28984,3H ATTACHED PHOTO OF COUNTER TECHNICAL INFO: travels: X: 900 mm Y: 600 mm Z: 400mm (OPTIONAL 600) wire diameter: 0,25 in 20kg coils X - Axis Travel (900 mm) Y - Axis Travel (600 mm) Z - Axis Travel (400 mm) U, V - Axis Travel (920 x 620 mm) Wire Diameter Range (min ~ max) (0.15 ~ 0.30 mm) Work Tank Dimensions W x D (1,374 x 1,133 mm) Max. Workpiece Weight (2,000 kg) Distance from Floor to Table Top (1,050 mm) Machine Tool Dimensions W x D x H (2,380 x 3,150 x 2,395 mm) Machine Weight (8,000 kg) FOR THE MACHINE WE CAN ORGANIZE TRANSPORT TO THE CLIENT FACTORY.

Table size: 590 x 520 mm Max. workpiece size: 800 x 600 x 220 mm Max. workpiece weight: 500 kg X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U/V Axis Travel: 1.25" x 1.25" Filter tank capacity: 440 l. Control Mitsubishi Approx. delivery weight: 2000 kg Approx. shipping dimensions in mm: 1550 L x 1800 W x 1930 H

Key data: 450 mm, 320 mm, 162 mm

Control FJ.37X Travel X/Y/Z 450/320/162 mm Travel U/V +/- 50 mm Workpiece size X/Y/Z 1100/760/360 mm Table load 500 kg Weight 3200 kg Wire guides ø0.25 and ø0.30 Base strips for EROWA tension beams Wire Alignment Block Wire threading module

Key data: 400 mm, 300 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22606 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: SLC 400 G Premium + Year of construction: 2015 Travel: 400 x 300 x 250 mm [ X x Y x Z ] max. workpiece weight: 500 kg U / V axis: 150 x 150 mm Cutting in a water bath Radiator Working tank 850 x 610 mm Taper +/- 25° at tool height 130 mm Control SPW

Key data: 500 mm, 350 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W

Key data: 320 mm, 250 mm, 160 mm

Inv. Num. : 7379 Type: H-CUT 203M20 Producer: HITACHI Created: 1995 Parameters: Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm

Key data: 370 mm, 270 mm, 255 mm

Inv. Num. : 7378 Type: ROBOCUT Alpha-0iE Producer: FANUC Created: 2013, GO 2020 Parameters: Control system: FANUC Max. travel length of the X-axis: 370 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 255 mm Feed length in the U-axis ( -): 60 mm Feed length in the V-axis ( -): 60 mm Minimum wire gauge: 0.1 mm Maximum wire thickness: 0.3 mm Max. workpiece dimensions: 700 x 600 x 250 mm Max. workpiece weight: 500 kg Machine height: 1950 mm Machine length: 2200 mm Machine width: 1930 mm Machine weight: 1200 kg Equipment: Measuring instruments Software

Inv. Num. : 5124 Type: 254Z Producer: Hitachi Created: 2003 Parameters: Control system: FANUC Table length: 400 mm Table width: 250 mm Maximum workpiece length X: 400 mm Maximum workpiece width Y: 250 mm Maximum workpiece height Y: 210 mm Equipment: Manual control List

Inv. Num. : 6099 Type: 203 Y Producer: Hitachi Created: 2002 Parameters: Hours: 39801 h Max. travel length of the X-axis: 330 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm Machine weight: 300 kg