wire drawing used for sale

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-50798-255

6x wireless headsets in original packaging (Plantronics CS540) Auction-ID: A1-50936-33

45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50799-98

45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50799-298

The electric wire rope hoist can lift up to 300 kg Auction-ID: A7-50799-144

The electric wire rope hoist can lift up to 300 kg Auction-ID: A7-50799-44

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-50798-65

Key data: 400 mm, 300 mm, 220 mm

Manufacturer: SODICK Model No.: VL 400Q Year: 2020 Condition: Used Stock number: 9621 Max. travel length of the X-axis: 400 mm Max. travel length of the Y-axis: 300 mm Max. travel length of the Z-axis: 220 mm Feed length in U-axis (+-): 80 mm Feed length in the V-axis (+-): 80 mm Maximum wire gauge: 0.1 -0.3 mm Tank dimensions: 860 x 690 mm Machine height: 2020 mm Machine length: 1990 mm Machine width: 2310 mm Machine weight: 2750 kg

Charmilles Robofil 510 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Charmilles Model: Robofil 510 Year of manufacture: 1995 Workpiece weight max.: 300 kg Electric connection: 380 V Approx. machine weight: 3350 kg Table dimensions: approx. 700 x 500 mm Maximum workpiece height: approx. 310 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-68

Verathon BladderScan 0570-0193 – Wireless Battery Charger / Hub Manufacturer: Verathon Model: BladderScan 0570-0193 Part Number: 0570-0193; Battery Part Number: 0400-0066 Included: 1 Wireless Battery Charger / Hub, 1 Battery, 1 Power Supply Condition: Like New Auction-ID: A1-51275-184

Specifications: Engine: 6-cylinder \"Deutz\" diesel engine Transmission: Hydrostatic Maximum driving speed: approx. 40 km/h Superstructure: Duport Tank capacity: approx. 6 m³ Tank Material: Plastic Working width: approx. 12 meters Number of sections: 5 Tyre size: 710/60 R38 Number of wire wheels: 48 Hours: approx. 14,942 hours Drive: 4x4 Steering: 4-wheel steering Features: Duport superstructure Double piping system Autopilot Automatic section closure via ISOBUS Variable output control via ISOBUS New ISOBUS installation Fine dust filter per section Double filling pump Variably adjustable oil pressure of discharge pump for pot pressure control Pressure gauge per section Lifting for ground pressure control Track gauge adjustment Air suspension Front weight set, approx. 1,200 kg Automatic lubrication Recently renewed/fitted: Discharge pump Section C ...

Batch of Betafence chicken wire green / galvanized – 154 rolls Specifications: Brand: Betafence Product: Chicken wire Number of rolls: 154 pieces Version: Green and galvanized Mesh sizes: 13 mm, 25 mm and 40 mm Heights: 50 cm and 100 cm Roll lengths: 10 meters and 25 meters Total length: 2,140 meters Features: 54 rolls of 13 mm galvanized – 100 cm high x 10 meters 15 rolls of 25 mm galvanized – 100 cm high x 25 meters 13 rolls of 13 mm galvanized – 50 cm high x 25 meters 12 rolls 13 mm green – 50 cm high x 25 meters 10 rolls 25 mm green – 100 cm high x 10 meters 50 rolls of 40 mm galvanized – 50 cm high x 10 meters Particularities: Lot consisting of a total of 154 rolls of Betafence chicken wire Total specified length is 2,140 meters Batch consists of green and galvanized versions Different mesh sizes, heights and roll lengths available Suitabl ...

JRI Spy RF N1 – Wireless Temperature Logger Manufacturer: JRI Model: Spy RF N1 Part Number: 06428 Type: RF Wireless Temperature Data Logger with LCD Display Usage: Cold Chain, Refrigerators/Freezers, Laboratories, Pharmacies Condition: Very Good Condition Auction-ID: A1-51275-166

Spoon length 1020 mm, equipped with display + control system Auction-ID: A1-50597-112

including on a roll; electrodes; Auction-ID: A1-50707-180

wire EDM machine, year 2019, CNC 31i-WB. Used machine. More info & price on IndustrialBuyer.

wire EDM machine, year 2005. Used machine. More info & price on IndustrialBuyer.

Fanuc Tape Cut Model WO CNC Wire EDM Machine Manufacturer: Fanuc Ltd. Model: Tape Cut Model WO Type: A04B-0248-B042 Equipment type: CNC Wire EDM Machine Year: 1991 Serial number: P918W0443 Country of manufacture: Japan CNC wire electrical discharge machining (Wire EDM) machine designed for precision cutting of electrically conductive materials using a continuously fed wire electrode. Technical specifications: X-axis travel: 200 mm Y-axis travel: 350 mm Z-axis travel: 160 mm Connected load: 9 kVA Electrical supply: 200–550 V, 50/60 Hz Equipment / features: Fanuc CNC control Automatic wire-feed system Wire tension/feed equipment Dielectric / flushing system Enclosed machining tank and work area Operator control panel Approx. dimensions (L × W × H): 1,800 × 1,600 × 2,000 mm Approx. weight: 1,800 kg Condition: Used. Main machine, CNC control, ...

Industrial diamond wire sawing machine manufactured by Pellegrini Meccanica S.p.A., Italy, designed for quarry and natural-stone cutting applications. The TDI 65 Super is a medium-power wire saw with variable wire speed and controlled machine travel, suitable for granite, marble and other dimensional stone cutting. Independent references also identify the TDI 65 Super specifically as a quarry diamond-wire cutting machine. Approx. 2,400 × 1,500 × 1,700 mm (L × W × H), excluding loose rails and accessories. Weight: 1,700 kg. The rails and loose accessories should ideally be measured and listed separately for collection planning. A reference describing this model's quarry equipment configuration specifically mentions 3 m additional rails, Ø385 mm pulley pairs and horizontal-cutting equipment as accessories for a TDI 65 Super Auction-ID: A1-51282-2

Type: A04B-0312-B001#E5. Power: 13 KVA. Auction-ID: A1-51529-18

Type: A04B-0309-B001/E5. Power: 13 KVA. Auction-ID: A1-51529-19

table length:920 mm table width:600 mm ampere:13,2 A weight of the machine ca.:6 t dimensions of the machine ca.:2,46 x 2,24 x 2,33 m X-axis:600 mm y-axis:400 mm Z-axis:260 mm max. table load:1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

wire EDM machine, year 2006, CNC W30FAS-2. Used machine. More info & price on IndustrialBuyer.

table length: - mm table width: - mm ampere: A total power requirement: kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawing blades serve as tools for the fine removal of chips, for removing old paint layers and for cleaning contaminated surfaces. Pull blades are usually not functional when purchased, but only a piece of steel sheet. In order to function, a fine ridge must first be sanded. We offer fully functional drawing blades of 0.4 mm and 0.5 mm Swedish steel for new purchases. If necessary, we will gladly grind your "used" or "new" drawing blades and let them come back to you functionally. Contact us. We would be happy to provide you with a new range of re-energised blades - ground or unground and/or a grinding offer. We would be happy to provide you with further information regarding drawing blades.

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm

ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the  ...

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L

VERGELLA SYSTEM TO 2 PLACES PHOTOS SBOZZATOR BIFILARE COPPER "SAMP" A 13 MOD PASSAGES, MT 45.20 VERGELLA 8 MM. MAX 4.5 - MIN 1.13. VMAX 30 N/1' WITH INFUSTATOR, 35 N/1' WITH BOBINATORs. RECOTTURA "SAMP" MOD. R 45.2 N 2 VERTICAL ACCUMULATORS FOR STATIC BOBINATORs N 2 BOBINATOrS STATES CI "SAMP" MOD. SSI/800 FOR BOBINE FROM 630 A800 WITH ROLLER AND MOTORIZED REFORIATOR N 2 VERTICAL ACCUMULATORS FOR INFUSTATORS. N 2 INFUSTATORS "SAMP" MOD. AS/3 FOR 2- 2.5 TON DRUMS. TRAFILERIA "POLO/COSEMA" FROM 15,000 LITRI TO FABRIC NOT FABRIC WITH FORCE RECIRCOLO AND RESTRAINING EXCHANGER1 PLUS 1 SPARE 4 SET OF TWO IN WORKING AND TWO OF SCORTA

DEFILE E 1000 MM. ELECTROLYTE ST. ST 3 A "STEULER" 2500 A, VMAX 15 N/1' VERTICAL ACCUMULATOR INFUSTATOR "FRISH" KG 1500 - 2000 A FUSTO ROLLER FOR CARICO AND SCARICO FUSTI

COMPONENTS OF EACH PLANT: "TECHNOFIL/DE ANGELI" MOD. T 15/25 COMPLETE OF VASCA FOR EMULSIONE RECOTTURA FORNO "TECHNOFIL/DE ANGELI" "TECHNOFIL" FOR BOBINE - 400 SYSTEM OF TRASTIOF FUSTITORS To 8 PLACES FOR T 15/25

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...

No. 3 CAVALLETTI OF A BARRA BOB - 800 SACION OF CESTONI TO 3 PLACES PICK-UP TUB WITH RECIRCULATION PUMP COMPLETE STAGNATURA OF CROGIOL CANAROLA OF RAFFREDDAMENTTO TO PIOGGY 3-PLACE FOR BOBINE - 400 - 560 - 630 MM FUMI SUSATION IMPIANTO ANOD FUSION VASCA

"SAMP" MOD, MM 2 C COMPLETE OF VASCA FOR EMULSIONE. "SAMP" RECOTTURA FORNO. DYNAMIC COLLECTION BOBINATOR FOR BOBINE - 400

COMPONENTS OF EACH PLANT: TRAFILATRICE "SAMP" 8 FILI MOD. MST/8/21 CABINA COMPLETE RECOTTURA "SAMP" MOD. RC 60 SYSTEM OF SAUNSTICS TO 8 PLACES DOWN VERTICAL AND SCARICO "POLO/COSEMA" FROM 10,000 L. CONTINUE TISSUE/NON FABRIC FILTER

TREFOLATRICI MONOARCO 3000 GIRI "O.M. LESMO", MODEL DTO 630, MATR. 737878/1, 737878/2, BOB COLLECTION : 630 COMPLETE OF PEPMESS "ANDANTEX" TYPE SATORFORSFOR1/8 BOBINE CONIFLIP REREFERES AND LINK WITH BANCAL OF ACUNCUNMENT FOR 48 BOBINEs

UNWORK CENTRE TO 54 MANMOTOR POSTS BOB - 560 ROTANTE COLLECTION FOR BOBINE - 1600 MM BANCAL OF DISTRIBUTION WITH 3 TESTES TO LEGARE

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

CAVALLETTO SVOLGITOR TO BARRA WITH FRENO D. 1500 MM TUBOLARE CORDAR To SILURO "DE ANGELI" MOD. CS 12 to 12 CULLE - BOBINE 560 MM GIRI 500N/1' COUNTERMETERS VOLANO OF TIRO - 1500 "DE ANGELI" 2000

SVOLGITOR TO BARRA "DE ANGELI" FOR BOBINE SILURO CORDATRICE 4 PLACES "DE ANGELI" FOR BOBINE : 1 000 GIRI 200 N/1' VOLANO OF TIRO - 1500 COUNTERMETERS "DE ANGELI"

High-performance deep-drawing packaging machine from MULTIVAC - ALSO SUITABLE FOR HARD FOIL - Film width 420mm - With many extras - Double format (thus 2x speed)

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

Format trolley for storing format parts for deep drawing machines made entirely of stainless steel with three drawers, a drawer and a storage surface, mobile with brake rollers Extracts resilient with 30 kg and with food-approved plastic, as well as the tray bevelled construction prevents the car from tilting. Format trolley is used for the proper storage of formats with all accessories. All parts are located in one place and can be driven to the machine when changing formats. Dimensions: 1250x900/600x1100 mm (WxDxH)

groove width: 3 - 90 mm drawing length: 430 mm working speed: 4 - 12 m/min slot-milling length: 400 mm return speed: 15 m/min total power requirement: 5,5 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 1,3 x 1,7 x 1,5 m • div. pull broaches and guidances The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packaging can be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: TX 12/121; Year of production 1991; Working with soft foil; Bottom foil: +/- 415 mm (approx); Upper foil: +/- 405 mm (approx); Molding length: 395mm; Forming width: 368mm; Molding depth: 90mm; Formats: 1.2; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg - the machine is dismantled; - technical condition - good; - yes, there is original documentation, CE certificate, CE nameplate and a general list of inputs and outputs.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.