wire drawing used for sale

Wire Mesh Trimming System Diameter: 2 - 6 mm possible, 3 versions available Suitable for: Industrial products - to cut the overhangs

Labelling unit Etiquette unit complete wth pneumatics

Industrial Semi-Automatic High Speed Wire Comb Truss (Wire-o) RENZ AUTOBIND 700 Type AB700 for books, calendars and skip bindings with KAS calendar system for optional calendar hanger and 9 x closing tools e.g. 1/4" - 5/16" - 3/8" - 7/16" - 1/2" - 9/16" - 5/8" - 3/4" Working width 700 mm ( 27.5" ) equipped with 3:1 and 2:1 gears PLC (PLC) controlled, data setting via touch screen (MMi) Automatic despooler and integrated release paper rewinder automatic binding table, programmable for skip, calendar, book and split bindings. Price plus VAT EXW. All information is subject to change. Subject to prior sale. Dealer shop. The sale is made under exclusion of any warranty.

Manufacturer: Wire Electronik, Type: GNV 451-20/130, Seriennummer: 85957, Frequenzumrichter: yes, Input: 3X 130 Volt, Output DC Volt: 220 V/50-60 HZ,

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

– after technical inspection – made in Poland –DTR TECHNICAL PARAMETERS: Log diameter max. 300 mm log length 500 - 3000 mm motor power 2 x 7.5 kW head spacing manual Feed infinitely adjustable on the inverter wheel diameter 600 mm length of belts 4004 mm Unhooking lines feeder height from the base 810 mm dimensions of the machine (length/width/height): 530 / 200 / 195 cm weight ~ 1200 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m

Max. speed: 360m/min, power: 5.6kW.

Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but set up for torsion free multiple drawing with twin pulleys, with documentation and spare pulleys, has been regularly maintained.

an older and used good cold rolling mill for the production of ribbed structural steel wire

One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet

One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW

inlet wire diameter up to 9 mm finished wire diameter 10% reduction number of drafts 1 diameter of capstan 500 mm speed -meters/sek 5

We can offer you all types of Wafios nail machines from S25 - N90

We offer wire looms asking for current offers. abc.steinfels-kg.de

We can offer you all types of Wafios nail machines from S25 - N90

6 STANDS ROD FINISHING BLOCK WITH 3 UPPER & 3 LOWER UNITS IN A V-SHAPE 170 MM DIAMETER DISCS TO PRODUCE DIA. RODS OF 5.5 TO 12 MM, 60 M/SEC.,

NEVER INSTALLED! - IS DESIGNED TO USE 170 MM DIAMETER DISCS TO PRODUCE RODS OF DIAMETER 5.5 UP TO 12 MM.

No of nails manufactured: 900 pcs/min Min. diam. of wire: 0,7mm Max. diam. of wire: 1,4 mm

Wire belt with FU, Cabinet Make: Sprematec Length: 1000 mm Width: 600 mm

Conveyor belt, wire belt with middle drive Length: approx. 5 m Working width: 300 mm

Wire belt -Length: 3250 mm -Width: 600 mm Gear motor

Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm

Basic refurbished belt circular operator SBR 2500 New chassis made of stainless steel New tapes New electrics Mehler Completely disassembled and rebuilt. 6 Month Warranty Immediately available

Wire stitcher Acme Champion Model A Year 1960 Capacity 6 mm Details for blocks & pamphlets Available direct

Wire comb locking machine; good condition; suitable for division 3:1; Max. Binding width 457mm (A3+); Max. Staerke 12mm; with 2 large rolls of material in white and silver.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good

Wire range: a) up to 800 N/mm2 = 6.0 - 15.0 mm b) to 1200 N/mm2 = 6.0 - 12.0 mm c) to 1400 N/mm 2 = 6.0 - 11.0 mm section: up to 14,000 mm feed speed: 22 - 120 mtr./min machine was partially overhauled and repainted; very good

Wire staerke range: 2.0 - 6.0 mm sectional slats: max. 500 mm suitable for round, profile and flat drainage; ready for use

Wire rod: 3.0 - 5.5 mm Nail length: 15 - 80 mm Capacity: 150/300 pcs/min -for steel rod; very good

Wire diameter range: 8.0 - 16.0 mm section sections: up to 14,500 mm feed speed: up to 50 mtr/min machine has been repaired, repainted, repainted + new electrics; ready for use

Wire staerke range: 1.8 - 3.4 mm nail length: 13 - 80 mm power: 550 naegel/min partially overtaken and repainted; very good

Machine was partially overhauled in 2014 wire diameter range: 4.0 - 10.0 mm section sections: max. 3,000 mm feed speed: 90/130 mtr./in; ready for immediate use

Wire diameter range: 2.5 - 6.0 mm feed wheel: unbrittle feed speed: max. 36 mtr./min Bending angle: 0 - 340 ; ready for use

wire diameter range: 2,5 - 6,0 mm wire feeding length: unlimited wire feeding speed: up to 36 mtr./min angle of bending: 0 - 340°; ready for operation

POLYGRAPH wire stitching machine Serial No. 0371054 good working condition | test possible in our warehouse ----------------------------- Test in our stock is possible. Purchase only available for commercial customers with proof We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back. Price is LOT. Shipping is not included. An invoice with VAT is created. (Price incl. 19% VAT = EUR 1547.00) Export price: € 1300,00 + shipping

Wire diameter range: 4.0 - 10.0 mm section sections: up to 4,000 mm feed speed: 90 / 120 mtr./min; ready for use

Wire diameter range: 8.0 - 12.0 mm section slats: max. 5,550 mm feed speed: 70 - 100 mtr./min directional fluegel with hyperbolic rollers; good

Wire stitching machine VEB LEIPZIG P 66 Built in 1972 Machine No.: 66.72.126 1 staple head Functional The machine can be demonstrated in our warehouse - please make an appointment. Wire Stitching Machine VEB LEIPZIG P 66 1972 In 1972 Serial: 66.72.126 1 stitching head working condition Test is possible in our stock – just make an appointment. ••••••••••• The machine is available in the warehouse and can be tested. Test in our stock is possible. The machine can be visited in the warehouse. Can be visited in our stock. Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The machine is sold as it goes and stands. We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back.  ...

Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min. machine has been completely repainted; very good

See a video about this after the description | watch a film after the description If you are using the Ebay app, please use the link below the video in your browser. Wire stitching machine INTROMA • Built in 1987 • Type 3278 • up to 160 brackets / minute • Accessories: German User Manual • Functional | Tested . . Wire Stitching Machine INTROMA • Year 1987 • Type 3278 • Speed: up to 160 stitches/min. • Include german manual • Good working condition | tested .•••••••••••••• WIRe stitching machine INTROMA - YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: ••••••••••••• The machine is available in the warehouse and can be tested. Test in our stock is possible. Only to commercial buyers with proof. Purchase only  ...

wire diameter range: 2,0 - 6,0 mm mesh width: 15 - 80 mm working width: max. 2.000 mm; ready for operation

Wire staerke range: 1.8 - 3.1 mm pins: 13 - 80 mm Power: 550 naegel/min repainted; good

Wire diameter range: 1.0 - 4.0 mm section sections: max. 2,000 mm feed speed: 5 - 90 mtr./min.; ready for use

control Mitsubishi CNC travel X/Y/Z 500/350/300 mm max. workpiece weight 800 kg table size 780x630 mm

Hohner economy 13; good condition; cleaned and geüprüft; Book thickness max. 13 mm. Block or saddle stitch. We are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse. Tours and demonstrations are possible by appointment at our premises. Gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.