136,800 used machines on RESALE, but how to find them? Machine Search
A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.
Manufacturer: Mitsubishi Model: FX20K Type: Wire EDM machine (Wire erosion) Year of Manufacture: 1999 Workpiece and Table Specifications - Maximum workpiece size (W x D x H): 1,050 x 800 x 295 mm - Maximum workpiece weight: 800 kg - Table dimensions: 780 x 630 mm - Axis travel (X / Y / Z): 500 x 350 x 300 mm - Maximum table feed rate: 1,300 mm/min Wire and Cutting Specifications - Wire diameter: 0.2 to 0.3 mm - Maximum wire feed rate: 250 mm/sec - Wire tension: 2 to 25 N Machine Dimensions and Weight - Overall machine dimensions (W x D x H): 1,810 x 2,310 x 2,050 mm - Machine weight: 2,550 kg Filter System - Tank capacity: 635 litres - Filter flow rate: 30 l/min - Filter fineness: 3 micrometres - Filtration: Paper filter (2 units) - Conductivity control: 0.5 to 100 x 10 ohm/cm - Filter unit dimensions (W x D x H): 800 x 1,700 x 1,720 mm - Filter unit weight (empty): 230 kg Ge ...
Manufacturer: Mitsubishi Model: W30FAS-2 Type: Wire EDM machine (Wire erosion) Year of Manufacture: 2006 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Wire EDM machine Sodick AQ 537L with few operating hours
working direction: left-right, single head. working direction: left-right electrical power supply kW: 420
A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible.
Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
x-axis: 350 mm y-axis: 250 mm z-axis: 256 mm U-axis: +/-70 mm V-axis: +/-70 mm dimension of workpiece: 750 x 550 x 256 mm Working hours: 29.559 h total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -edm hours 29559h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine very well maintained, operating in a clean workshop and used for small-series production. Hard drive recently replaced. Inspection possible.
This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details.
Used industrial machine offered by IBEXTRA.
This 5-axis +GF+ AgieCharmilles AGIECUT PROGRESS V4 was manufactured in 2007. It features a maximum workpiece dimension of 1,300 mm x 1,000 mm x 510 mm and can handle a maximum workpiece weight of 3,000 kg. The machine offers impressive axis travels, including X-axis travel of 800 mm and Y-axis travel of 550 mm. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AgieCharmilles AGIECUT PROGRESS V4 machine we have for sale. Contact us for further details.
Used industrial machine offered by IBEXTRA.
This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine.
CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.
AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring.
EDM machine Sodick AQ 327L BJ 2006 EDM machine Sodick AG 60L BJ 2020
Key data: 320 mm, 220 mm, 255 mm
Inv. Num. : 9242 Type: Alpha-0iC Producer: FANUC Created: 2005 Parameters: Control System: FANUC Series 180-is-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (-): 120 mm Feed length in the V-axis (-): 120 mm Max. workpiece weight: 500 kg Machine weight: 1200 kg
wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370
diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200
diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370
diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350
wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350
with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350
diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950
diameter range 2,2-4,2 mm nail length 13-105 mm output - pieces/min 430
wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430
diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800
diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800
diameter range 1,8-3,4 mm nail length 13-80 mm output - pieces/min 550
wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420
wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420
diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550
diameter range 2,1-3,1mm nail length 32-51mm output - pieces/min 1600
diameter range 1,8-2,5 mm nail length 32-57 mm output - pieces/min 2000
diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700
diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520
diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550
wire diameter range 10 mm width of band 100 mm feeding length 250 mm
wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5
dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm
line wire diameter 1,6-2,8 mm point wire diamter 1,4-2,5 mm output - meter/min 25-38
dia. range 0,5-2,5 mm width of band 50 mm feeding length 170 mm number of slides 5 punching power 5 to output - pieces/min 225
wire dia.: 5 - 17 mm wire length: max. 5.000 mm straightening feed: stufenlos bis ca. 60 m/min : 11 kW, 380 V, 50 Hz : 45 kW, 1480 U/min, 380 V, 50 Hz total wight: ca. 15 t : Typ DZA/20 f. 1000kg Coil Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We are offering for sale a complete cable assembly line composed of the following equiptment: - Komax Alpha 433 L Fully Automatic - Komax ADS 123 Wire Storage - Safety Enclosure - Extraction System (AAT 260) - Operating Computer and Control - Various Crimping and Processing Modules - Further Accessories Available Upon Request Condition : Fully Functional Year - in between 2008 - 2012 Find more here - .ucymachines/ Contact us at - sales@ucymachines
This Mitsubishi MV1200S wire EDM machine was manufactured in 2017. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 220 mm. The machine is equipped with automatic wire threading and the Mitsubishi D-CUBES control system, ensuring efficient and stable production. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200S machine we have for sale. Contact us for further details.
This 5-axis Mitsubishi FA20 wire EDM machine was manufactured in 2004. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine can handle workpieces up to 1050 mm x 800 mm x 295 mm and has a maximum workpiece weight of 1500 kg. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi FA20 wire EDM machine we have for sale. Contact us for further details.
Used ROBINO & GALANDRINO Wirehooder record 10-2Technical Specifications & Performance DataThis Automatic Wirehooder is a compact, high-performance wirehood applicator designed for sparkling wine and premium beverage closures. Built for reliable operation on glass bottles, it delivers precise wirehood positioning and twisting for consistent, secure muselet application at industrial speeds.Machine type: Automatic Wirehooder (wirehood/muselet applicator)Model: Record 10/2Year of manufacture: 1994Refurbishment: Overhauled in 2017Production speed: 10,000 bphContainer material: Glass bottlesInfeed direction: ClockwiseWirehood magazine: High-capacity, long-autonomy designSupported wirehood styles: Collio, Collio light, Collina, Lia, Sile, Extra L, Valdobbiadene, Elegance, Artù, Piave, Monterossa, Cru, Magnum CollioAdvanced Automation & Control SystemsEngineered for stable, repeatable operation ...
Used ROBINO & GALANDRINO wirehooder 6000 BPHTechnical Specifications & Performance DataThis automatic wirehooder is engineered for reliable wire cage application on bottles, ensuring consistent tightening and alignment at production speeds suitable for medium-scale beverage production. Manufactured by Robino & Galandrino, the REKORD 10/2 configuration combines a rotary handling system with a long-duration magazine and ground-level loading to minimize downtime during continuous operation. This second hand unit is a strong addition to any used bottling line focused on premium products and industrial packaging efficiency.Manufacturer: Robino & GalandrinoModel: REKORD 10/2Year: 1994Machine type: Automatic wirehooder (wire cage applicator)Production speed: up to 6,000 bphConfiguration: 10 platesWirehood application: Muselet/wire cage applicationMagazine: Long-duration, high-capacityLoading: G ...
Overview This wirehooder was manufactured in 2010 by Robino & Galandrino. The RECORD 14000 is designed for the application of wire hoods on bottles. The machine was in production until the end of March 2026 and is in working condition. The machine has been inspected, cleaned, and lubricated. Technical data Capacity: up to 14,000 bottles/hour Application: Wire hood application Configuration: RECORD 14000 Utilities: 400 V / 3F / 50 Hz / ICC 20 A / IN 4.15 A
maximum number of results exceeded
please refine your search
