wire cut machine used for sale

Granulator - Shini SG-2324-CE (2 pcs.) Year of Make: 2010 Location: Lodz, Poland Description: Slow-speed granulator with gearbox, with cyclones and dedusting Power: 6 kW 2 stator blades, 6 rotor blades, the sieve - interchangeable Hopper inlet: 260x240 mm Grinding chamber opening: 240x240 mm Automatic feeding of the regrind to the big bag Soundproofed mill All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Granulator Rapid- G15035-DT (3 pcs.) Year of manufacture: 2013-2014 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the sieve - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

Hydr. Swing cut guillotine shears HERA type HSS IIIFabr. No. 598 Year of manufacture 1986Cutting length 3100 mmCutting thickness 3 mmStand projection 200 mmKnife strokes 25 strokes/min. Mains connection 380 Volt, 50 HzMotor power 3 kW- motorized adjustable back gauge 1070 mm- actual digital display for the back gauge- cutting gap adjustment- cutting length adjustment- front side stop left 1000 mm- 4 pieces sheet metal support arms 1000 mm- el. Foot switchSpace requirement without sheet metal support arms L x W x H 3630 x

Swing-cut guillotine shears KÖLLSCHEN type BSK 2000/2Fabr. No. 69 1307 Year of construction 1969Cutting length 2000 mmCutting thickness 2 mmStand projection 90 mmWorking height 920 mmMains connection 380 volts, 50 HzEngine power 4 kW- Drive via geared motor with brake and crankshaft- mechanical sheet metal hold-down- manual back gauge 500 mm- stop adjustment via 2 handwheels, rear on the backgauge guide with measuring scale- front side stop left 720 mm- electric foot switch- manual

A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible.

Lg.Nr. 25062 Specifications: - with pressure joining pliers ECKOLD, type MZ + hole punching device - Working pressure infinitely adjustable max. up to 500 bar - Compressive force joining pliers 25 Kn - Single cycle or continuous cycle - Cycle rate infinitely adjustable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: EST Ticino Type: ET-BM 400 Turning length: 1500 mm Turning diameter bed Ø: 800 mm Turning diameter slide: 470 mm Turning diameter pit Ø: 400 mm Pit length: 750 mm Spindle bore: 130 mm Power spindle: 15 kW Bed width: 600 mm Quill: 130 Ø Stroke quill: 300 mm Spindle mount: 6 Mk Speed: 600 rpm Dimensions (estimated) Length: 4500 mm Width: 1800 mm Height: 1800 mm Weight: 5200 kg with accessories: -Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holders, tips, drill chucks, tools All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the S ...

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired

Lead and pull spindle lathe WEIPERT Year of Make: 1956 Spindle bore: 90 mm Center width: 3000 mm Circulation Ø over bed : 800 mm Circulation 0 over slide: 610 mm Circulation 0 in offset: 1120 mm Speed range: 7.5 – 475 rpm With the following accessories: Multifix tool holder with 11 inserts Coolant Setup Three-jaw chuck 0315 mm Three-jaw chuck 0 400 mm Three-jaw chuck 0 500 mm Face Plate 0 400 mm Face Plate 0 800 mm Face Plate 0 1000 mm Running Lynette Various turning tools (30 pcs. indexable insert tools) 2 moving centering tips 1 drill chuck Operating instructions

Manufacturer: MicroStep Model: MSF 4001.25L Type of Machine : CNC Cutting System Features: - 2D laser cutting head with IPG fiber laser source YLS 4000 - Fully automatic change table - Automatic loading and unloading system MSLoad Technical Data: - Working Area: approx. 4,000 x 2,500 mm - Guides: High-precision linear guides - Drive: Maintenance-free Panasonic AC servo motors - Positioning Speed: Up to 130,000 mm/min - Measurement System: IRC 2500 (incremental encoder) - Z-axis Positioning Speed: 18 m/min - Z-axis Travel Range: 150 mm - Z-axis Acceleration: 0.75 G - Positioning Accuracy (Pa): 0.07 mm (according to VDI/DGQ 3441) - Repeatability (Ps): 0.03 mm (according to VDI/DGQ 3441) - Ambient Temperature: +10 °C to +35 °C - Relative Humidity: 0% to 90% --------------------------------------------------------------- Find more here - / Contact us at -

Tobacco cutting machine from the company Fly Mak, almost new (2023), hardly running. Adjustable to different cutting sizes from 0.02 mm to 20 mm. There is also a knife sharpening machine. Fpsbmkowdatlo Df Tuok Capacity: approx. 200 kg/hour

Specifications Brand: Bottero Type: 301C Kind: Layered cutting table Serial number: GG301C-3860 Year of construction: 1997 Weight: ± 2,800 kg Assets: 10 kVA Electrical connection: 380V / 50Hz Length mm: 4,900mm Width mm: 3,350mm Height mm: 930mm Transport dimensions L x W x H 4.2 x 2.4 + 4.8 x 1.0 x 1.6 Min.-max. glass thickness: 3– 10mm, 33.1– 66.2 Min.-max. glass size: Max. length 3,400mm Photos/film available: The photos are not of this cutting table, but of a table similar to this one. The identification plate is of this machine.

Specifications Brand: Hegla Type: VSG A37; cutting table LKTR 7034; Tilting table Kind: Layered cutting table with tilting table Chassis number: Cutting table; 2094 Tilt table; 15484 Year of construction: Oct 2000 Weight: 3,500 kg cutting table Air pressure: 6 Bar Length mm: 11,500 mm Width mm: 4,400 mm Height mm: 2,500 mm Working height: 950 mm Number of cutting heads: 1-2 cutting heads, heating or breaking mechanism Control type: PLC controlled 01.1.190

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear With pipe notch on the steel bar shears Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Width 92 cm Year of manufacture 1997 Computer control with monitor Color monitor Air table with blower 2 side tables with air nozzles Rear table cover Price on request. We supply and install worldwide.

8 insert rollers for Kalmeijer. more on baemm.eu.

Polar 92X High speed cutter Year 2004 Program Large side tables Spare knife Photocells

Height=1.41 m, Overall length= 0.9 m, Overall width= 0.65 m, Net weight= 210 kg,

Height=1.3 m, Overall length= 2.25 m, Overall width= 1.2 m, Net weight= 1000 kg,

Height=1.19 m, Overall length= 0.55 m, Overall width= 0.8 m, Net weight= 170 kg,

Height=1.29 m, Overall length= 0.55 m, Overall width= 0.8 m, Net weight= 230 kg,

Height=1 m, Overall length= 0.9 m, Overall width= 1.25 m, Net weight= 220 kg,

Height=1.85 m, Overall length= 2.5 m, Overall width= 3.5 m, Net weight= 4500 kg,

Height=1.06 m, Overall length= 2.22 m, Overall width= 1.12 m, Net weight= 977 kg,

Height=1.24 m, Overall length= 0.67 m, Overall width= 1.38 m, Net weight= 280 kg,

Height=1.35 m, Overall length= 1.3 m, Overall width= 2.15 m, Net weight= 1390 kg,

Height=1.5 m, Overall length= 1.1 m, Overall width= 1.75 m, Net weight= 360 kg,

Height=1.01 m, Overall length= 0.65 m, Overall width= 0.9 m, Net weight= 140 kg,

Height=1.02 m, Overall length= 0.9 m, Overall width= 1.1 m, Net weight= 590 kg,

Height=1.22 m, Overall length= 1.1 m, Overall width= 2.16 m, Net weight= 865 kg,

Height=1.75 m, Overall length= 3 m, Overall width= 1.7 m, Net weight= 1050 kg,

Frozen meat slicer Magurit 152, Electrics and hydraulics completely overhauled, Connection 400V, 4kW, year of construction 1991, Dimensions LxWxH approx. 185x75x138cm, weight approx. 390kg, very good condition, fully functional

A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible.

A dividing system consisting of longitudinal and cross-cut saw Anthon is available. Production capacity at 800mm/500mm: approx. 20m³/h, max. panel dimensions X/Y: 6300mm/2500mm, total system dimensions X/Y/Z: approx. 48m/16m/3m, weight: approx. 60t. 1) Saw Anthon LNB-LNB, year of manufacture: 1994, max. package height: 150mm, control: Siemens S5. 2) In-house paternoster, decks: 3, levels: 2. 3) 4x liftomat Holzma Hau series, years of manufacture: 2004, stacking positions: 4. 4) Feeding system Systraplan, year of manufacture: 1989, stacking positions: 3. 5) Cut-off saw Holzma, year of manufacture: 1996. 6) Chipper Masur LZ 800, year of manufacture: 2003. Includes critical spare parts, such as a replacement control unit. This is a system for mass production. Documentation available. An on-site inspection is possible. Expected to be available from October 2026.

Dewalt Radial arm saw Cutting width 350mm Cutting height 65mm 1.5KW 400V 50HZ Table 800 x 600mm Solid, cast-iron radial arm boom for maximum accuracy and durability with base frame Pull saw double bevel adjustable Hemming cuts also possible G&-5195-M3180

Treif Divider CE in good condition

(engraving, cutting) S. No.: S36-0685 Equipment / Additional information: With Rip and extraction system (S. No.: 01422-11122) Laser type: CO2 CO2 laser power: 80W Working area: 813 x 508 mm Loading area: 890 x 600 mm Max. workpiece height: 210 mm with 1.5-inch, 2.0-inch lens 197.5 mm with 2.0-inch spacer lens, 2.5-inch lens 159 mm with 4.0-inch lens Working table: Multifunctional table concept Rulers in mm or inches Electronic, programmable Z-axis with servo motor Max. process speed: 355 cm/s Max. acceleration: 50 m/s² Motor: Brushless DC servo motor Encoder: Incremental Optical elements: Telescope, lens, and mirror Lenses: 1.5-inch, 2.0-inch, 2.0-inch spacer lens, 2.5-inch, 4.0-inch Repeatability: +/- 0.015 mm (0.0006 inches), across the entire work area Addressable accuracy: 5 µm (0.0002 inches) Accuracy of Part size: Dependent on material and process Max. l ...

CURSAL TRV500 mobile stop cross-cut saw in accordance with CE standards, working direction from right to left, consisting of: – RALM 4000 x 450 roller conveyor – TRV500 rapid cut-off machine with: Double button cutting control PV500 pressure 150mm stroke blade D=500mm PLC for cutting programming and ejector management – TSLR 5000 x 400 discharge mat – electronic retainer FCN/80 L=5000 – 1 EP1500 pneumatic ejector – roller rail unit VRF1500x2000x5

Manufacturer: TRUMPF Model: TruLaser 5030 Classic Year of Manufacture: 2007 Laser Power: 5000 W Operating hours: 55,874 h (of which only 23,565 h were used for cutting) Operation mode: exclusively single-shift operation Maintenance: carried out regularly and exclusively by Trumpf Equipment: includes 2 interchangeable pallets Electrical Specs: - Supply: 400 V / 50 Hz - Connection Load: 105 kVA - Control Voltage: 24 V - Required Fuse Protection: 3 × 160 A Gas Supply Requirements: - Compressed Air: 7–10 bar - Nitrogen (N₂): 30 bar - Oxygen (O₂): 20 bar Find more here - / Contact us at -

Height=0.81 m, Overall length= 1.75 m, Overall width= 1.03 m, Net weight= 510 kg,

Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg

Make: Colchester Type / Model: Student Center width: 500 mm Passage: 42 mm Tip height: 175 mm Turning diameter over bed: 350 mm over slides: 200 mm Speed range: 34 to 1,500 mm Feed lengthwise: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: Steel holder, 3-jaw chuck, 4 jaw chucks, steel bracket Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm

Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display