wire and strip used for sale

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1°) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2°) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15° Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15° Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Consisting of: various charging stations, charging stations semi-finished products, parts and charging cables. On approximately 8 pallets. Auction-ID: A1-50244-3

batteries: 5x Pylontech FH48074 H1 3.55 kWh BMS: Pylontech FC0500-40S-B management solar panels: 20x Longi LR5-54HPB-410M (410 wp) Full Black inverter: Goodwe Hybrid Inverter 8K (3 phase) total power: 8,200 Wp power: 410 Wp per solar panel Condition: New Auction-ID: A1-46381-416

Dimensions of pulling equipment 130x110x260 cm, meter cupboard 85x85x190 cm Auction-ID: A1-50656-147

Maus automatic grinding machine, type: SAM 1200 , year of construction: 2008 v.v. 3-sided measuring device and accessories Auction-ID: A1-50656-25

approximately 1000 allen bolts and 1000 stainless steel body rings Auction-ID: A1-46381-453

Maus automatic grinding machine, type: SAM 1200 , year of construction: 2008 v.v. 3-sided measuring device and accessories Auction-ID: A1-50656-26

Including surveying wheel, Carbon tripod, clinker puller, bump bar and pestle, on 1x pallet, without the pallet Auction-ID: A1-50903-17

Pallet not included. Decommissioned KNF Neuberger pump VDE 0530 LaboTech Retschmix TM01 Vortex Mixer Stnart Platform Rocker STR6 Laboratory Mixer Auction-ID: A1-50846-182

In and including lockable Kruizinga galvanized stacking bin Auction-ID: A1-50903-54

In and including lockable Kruizinga galvanized stacking bin Auction-ID: A1-50903-55

approximately 2000 Allen bolts and 2000 stainless steel body rings Auction-ID: A1-46381-454

KDF-2239NV0N30 Valve : 2.8 mm 16 bar 100°C Auction-ID: A1-50846-241

Two steel storage silos with hopper floor on steel support structure, marked L71 and L72. Inscriptions: \"BENTONITE\" and \"ZILVERZAND\". Content per silo 60m3, content partly present. Version: vertical silos with hopper bottom. Construction: steel frame/support structure. Access: ladder(s) and landing/walking platform. Auction-ID: A1-50656-39

Various tables in various sizes: - 1x 2000x1750x1000 mm - 2x 2500x1250x1000 mm - 1x 2000x1250x1000 mm Cradle width 1000 mm, height from 700 to 900 mm Auction-ID: A1-50656-158

Consisting of: development tools, interfaces, modules, printed circuit boards, displays, sensors, cables, connectors and various electronic components. On 1 pallet. Auction-ID: A1-50244-105

Paint shop in line arrangement with several grey machine/cabinet modules, exhaust ducts and a freestanding control cabinet, various fan/motor units on pedestal with hanging rail system. Auction-ID: A1-50656-36

Control cabinet with contents consisting of: - ABB switches - PHOENIX QUINT POWER Auction-ID: A1-50846-204

Moulding sand machines with silo storage for sand consisting of bunkers on steel structures with piping and various conveyor belts. Auction-ID: A1-50656-20

25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-46381-436

Various tools including sting grinders, hand grinders both pneumatic and high frequency Auction-ID: A1-50656-201

Demolition belt and hand grinding shop with 6 grinding tables partly with 1 stone grinding machines with extraction Auction-ID: A1-50656-24

Of which 1xHanna HI991300+ph meter, 1x Hanna HI991301 ph meter and 1x Aqualytic AL250T-IR turbidimeter Auction-ID: A1-50903-32

Including bumpers, shovel, on 1x pallet, without the pallet Auction-ID: A1-50903-15

Including bumpers, shovel, on 1x pallet, without the pallet Auction-ID: A1-50903-16

approximately 4000 allen bolts and 4000 stainless steel body rings Auction-ID: A1-46381-455

25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-46381-428

approximately 8000 Allen bolts and 8000 stainless steel body rings Auction-ID: A1-46381-456

Consisting of: various power cables, CEE plugs, connection cables and cabling. On 1 pallet. Auction-ID: A1-50244-102

Consisting of: including charging station parts, circuit boards, control modules, relays, power supplies, cabling and various electronic components. On 4 pallets. Auction-ID: A1-50244-114

Consisting of: kWh meters, type 2 Mennekes connectors, wire and cables and various other accessories. On approximately 12 pallets. Auction-ID: A1-50244-4

Consisting of: various Phoenix Contact components, Last Mile Solutions EVC 5.05 AC controllers, terminal blocks, potential distributors, relay modules and various connection and control components. Auction-ID: A1-50244-94

Consisting of: several linked workstations, work tables, roller conveyors, test rig for charging station and control cabinet with control for test setup. Auction-ID: A1-50244-5

KDF-2239NVON3 16 bar 100 C Valve : 2.8 mm Auction-ID: A1-50846-240

Equipped with GeoProbe 4220 drilling rig, unused soil bucket Auction-ID: A1-50903-5

Consisting of: Wöhner NH components, Schneider Electric current measuring transformers, DEHN surge protection, switchgear, connection components and various electrical components. On 1 pallet. Auction-ID: A1-50244-100

The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the bo ...

A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible.

Screw Compressor - Kaeser CSD105 Description: Very good technical condition Operating hours: 15,000 h Power: 55 kW Max. pressure: 8 bar The device has been regularly serviced by an authorized Kaeser service center in Italy All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Geibel & Hotz FS 1050 GT SL Surface Grinding Machine Working range grinding length (max.) 1,000 mm Grinding width (max.) 500 mm X-axis (longitudinal) longitudinal table stroke 50 – 1,050 mm Table speed 0.001 – 35 m/min (infinitely variable) Y-axis (vertical) Distance table to spindle center 180 – 625 mm (optionally up to 825 mm) Perpendicular speed 50 – 4,000 mm/min Z-axis (transverse) transverse travel (max.) 500 mm Grinding spindle Grinding wheel dimensions 400 x 100 x 127 mm (Ø x width x bore) Spindle drive (standard) approx. 11 kW Max. speed up to 2,380 rpm / 35 m/s Weight & installation Total weight of the machine approx. 4,500 kg Max. table load approx. 1,380 kg Various accessories according to photos: - Grinding wheel mounts - Documentation in detail - Hoffmann Grinding Wheel Adjustment Scale If you have any questions, please contact us at Tel. 017 ...

Equipped with chain and protective cover. Stihl petrol chainsaw 30cm Type: Stihl-ms162 Auction-ID: A1-40900-458

CNC universal milling machine HERMLE U 630 T With track control Heidenhain TNC 426 Year of Make: 1998 Travel: X 630 (875) Y 500 Z 500 Speed range: 20 – 7,000 rpm infinitely variable With the following accessories: Rigid angle table 900 mm x 528 mm clamping surface Vertical tool changer with 16 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Heidenhain Coolant Setup 4 Height Adjustable M

3 MIWE deck ovens Thermoexpress with fully automatic MIWE Athlet loader - 3 pieces of thermal oil deck ovens - Thermal oil boiler MIWE HKZ 350 - MIWE Athlet fully automatic feeding unit - Condition: Good, checked, ready to use Visits and test runs are possible.

Makita Accessories 70-piece drill and screwdriver bit set | in M-box 1 case - E-24913 Drill and screwdriver bit set for working with metal, wood and masonry. The package includes 13 HSS-R drills for metal, 6 drills for wood, 5 drills for masonry, 3 flat drills for wood, 30 screw bits, 10 nut setters, countersink, magnetic bit holder and diameter size. Auction-ID: A1-40900-139