wire and strip used for sale

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

Stripe breaking device IMA

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

Title: 2018 Schleuniger JacketStrip 8400 Benchtop Wire & Cable Jacket Stripper Description Overview: The Schleuniger JacketStrip 8400 is a high-precision, benchtop cable jacket stripping machine designed to process outer insulation on single conductor wires and multi-conductor cables. Featuring a four-blade rotary incision head, pneumatically operated clamping jaws, and powerful electric pull-off, it delivers fast, repeatable cuts without requiring blade changes for different cable sizes. Key Features: - Four-blade rotary incision system for accurate, repeatable cuts - Universal blade design (no blade changes needed for standard applications) - Handles full stripping, partial stripping, and window stripping - Pneumatic clamping system ensures optimal hold during stripping - LCD display for intuitive setup and machine diagnostics - Automatic waste material ejection Technical Sp ...

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

LVD Siena strippit 1212 punching machine was built in 2005 in Belgium by LVD Group NV. Designed for machining steel and aluminium sheets, the machine is an excellent choice for both unit and batch production. Reliable components with excellent performance, combined with a compact design based on a one-piece frame, ensure that the SIENA 20 1212 punching machine delivers excellent precision and machining quality for many years of use. The capacious, 27-station turret with 3 auto-index stations and MultiTool support offers a wide variety of machining options and a high level of flexibility. Precision tools punch metal sheets with a force of 20 tonnes on a large brush table, which protects the surface of the workpiece from scratches and scrapes, while increasing the quality of machining. All of this is completed by the GE FANUC CNC control with its unique Smart Stroke function for automat ...

Franz Slicer for Strips 5 mm

McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.

Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz

CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL

Matrix 105 systems system one stripper Matrix 105 plasma Asher Plasma descum semiconductor equipment Applications Photoresist Stripping Matrix System One The Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment represents the Industry Standard in single-wafer photoresist removal and the mainstay of the highly successful System One family. Developed in cooperation with many of the world’s leading IC producers, the Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment has been designed for optimum performance and Cost of Ownership. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Matrix Stripper E 145 system one stripper Matrix plasma Asher Plasma descum semiconductor equipment Applications Photoresist Stripping Matrix System One The Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment represents the Industry Standard in single-wafer photoresist removal and the mainstay of the highly successful System One family. Developed in cooperation with many of the world’s leading IC producers, the Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment has been designed for optimum performance and Cost of Ownership. Find more here - .ucymachines/ Contact us at - sales@ucymachines

punching pressure: 16 t plate thickness: 8 mm plate length max.: 1250 mm sheet width - max.: 1000 mm engine output: 13 kW control: Cadman CNC voltage: 400 V weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3600 x 2300 x 2000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKUR0871 MakeKuehni (CH) LocationBarneveld TypeStripper column Pressure Working pressure2 Bar Vacuum possiblecheck Main Features Capacity500 Ltr./Hr. Specified Features - Distillation Capacity220 ltr Column sizesdia.250mm x4132mm Number of columns:1 Max. temperature-10/200 Degr.C. With condensercheck MaterialStainless steel 2.4602 (Hastelloy C-22) General No.731229 Mach.No.731229 Year of construction1993 Floorspace1,0x0,8 M Total height4,2 M Weight250 Kg Extra SpecificationsSteam stripping column, capacity 500 Kg/hOils & fatDistillationFine chemicalsOther chemicalSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoBeveragesAPIKuehniIndustries > Food & Feed > Oils & fatColumns > DistillationIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries ...

Marking trolley floor marking device for professional markings Perfect Striper including holder for spare cans, marking device -Manufacturer: AMPERE, floor marking device Super-Striper -Line width: approx. 3 - 10 cm -Number: 3x marking device available -Price per piece -Dimensions: 880/340/H835 mm -Weight: 6 kg/piece

- Thick turret WILSON tool system - Large package tooling WILSON - Auto indexing Rotation tools included - Laser Safety guids included 

Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500

wire diameter range 1,5-7 mm mesh width 15-80 mm line wire distance 15-80 mm working width 2100 mm mesh width automatic 200 mm output - strokes/min 22

Manufacturer: Wire Electronik, Type: GNV 451-20/130, Seriennummer: 85957, Frequenzumrichter: yes, Input: 3X 130 Volt, Output DC Volt: 220 V/50-60 HZ,

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Inductive sensor, electronic sensor, proximity switch, proximity sensor, proximity sensor -Manufacturer: Bürkert, Proximity Switch proximity switch unused -Type: 3-Wire PNP-NO -Voltage: 10 - 30V DC -Dimension: 103/70/H90 mm -Weight: 0.3 kg

Wire Mesh Trimming System Diameter: 2 - 6 mm possible, 3 versions available Suitable for: Industrial products - to cut the overhangs

Labelling unit Etiquette unit complete wth pneumatics

APV 16 Servo Driven Wire-Cut & Continuous Rope Extruder with Guillotine Cutter APV 16 Servo driven Wire cut and continuous rope extruder with guillotine cutter / Frozen Dough wire cutter originally designed to cut cookies onto waz papaer. - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley controls w Touchscreen - 16 wide two roll extruder - Wire-cut with oscillating knife - Continuous extrusion capable for ropes - Paper feed roller for cutting products onto wax paper - Guillotine cutter for wax paper but can also be used to cut ropes of product to specific lengths - Raising and lowering bed - Die with (5) outlets measuring approximately 0.625 x 1.25 - 3/60/480v - Machine on casters - Footprint approximately 11 long x 4 wide Find more here - .ucymachines/ Contact us at - sales@ucymachines

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

various wire spools for calendars/exercise books for production. Different Wire-O coils 2:1 (different colors, different plastic rollers for spiralization). Calendar brackets, shafts

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

General SKU032U183 MakeSuperior B.V. TypeSZV 800/5/6 No.8671 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Surface0.3 m2 Size length580 mm Sizes width480 mm Specified Features - Vibro sieve Vibro sieveSorting and dewatering sieve Sieve surface0,28 m² Number of sieve decks:4 Sieve sizes580 x 480mm With covercheck Inletø 100mm Outlet5x ø 75 mm + water outlet Drive vibro motorcheck Motor2x 0,4 kW, 220/380 V, 980 rpm Sieve perforation7,0mm, 6,0mm, 5,0 mm, 4,0 mm MaterialStainless steel With jacketcheck General Mounted on mild steel framecheck Floor space1,3x1,0 m Total height1,2 m Weight400 KGVibro sievesConsumer wastePowdered foodsGeneric medicinesStarchOther chemicalRubberPlastic & polymersFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMiner ...

Hohner Economy 25/40 Wire Stitcher - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Hohner Economy 25/40 Wire Stitcher Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Hohner Economy 25/40 Wire Stitcher Price: 5000 EUR Download PDF Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching ...

Introma ZD-2D Wire Stitcher - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Introma ZD-2D Wire Stitcher Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Introma ZD-2D Wire Stitcher Price: 1750 EUR Download PDF Introma ZD-2D Wire Stitcher Machine in very good condition, recently serviced. Technical specifications: Capacity: 180/min Maximum stitching thickness: 25mm Wire diameter: max. 1mm Power supply: 380V Weight: 230kg The machine features an adjustable table for block and booklet stitching. Front margin. Instructions included. Ask About The Product Name (required) Company name Email (req ...

Zip Wire closed spiral in spools - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Zip Wire closed spiral in spools Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Zip Wire closed spiral in spools Price: 1000 EUR Download PDF Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our newsletter to receive information from us about product news, promotions  ...

James Burn BB43H Wire-O® binding machine – includes hanger unit for calendar production, Reliable and solid semi-automatic binding machine by James Burn, modelBB43H, year 1997. Designed for punching and closing Wire-O® bindings up to 430 mm in width., This machine is equipped with a hanger unit, making it suitable for producing calendars with hangers., Technical specifications:, - Max. binding width: 430 mm, - Supported Wire-O® sizes: 1/4” to 1” (2:1 and 3:1 pitch), - Output: up to 1,000 books/hour, - Includes full set of closing tools, - Operation: semi-automatic, - Calendar hanger feeder included, - Requires compressed air, - Power supply: 230 V / 50 Hz / 3 A, - Dimensions: approx. 2100 × 1100 × 1500 mm, - Weight: approx. 650 kg, Regularly serviced by James Burn International, Fully operational and ready to use

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

SANTANDREA DUAL SHAFT SHREDDER, Shafts length 1.500 mm, 77 mm.knives - 2 hooks, 1.500 x 960 mm shredding room, planetary gearbox, Electric motor 75 kW 400v 50hz, Hydraulic pack with 400 lt.tank, loading hopper with oleodynamic pressing unit, hydraulic pack, New electrical control panel, CE compliance, Users manual, electrical drawings, Sturdy carbon steel structure, Dimensions 3.400 x 2.000 mm, width: 1.500 mm. , Power: 75 kw

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for modernization were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating eleme ...

3x VERSATRONIC RV1s P&P machines which are slow (1200cmp/h) but full fully functional and with a lot of feeders. These machines were manufactured in a UK factory Versatronic. Machine were named Violer, Rosie and Blue. The last one is faster, little better software for fiducial camera for components. All machine are working and were used for prototype and low series like 50pcs electronic or 25pcs or 200pcs electronic. All P&P machines have two cameras, one for fiducial (up camera) and one (down camera) for components. Machines can place without problem components down to 0402 and fine pitch component like QFN or VFQFPN48… Speed for firs two is 1200cmp/h the last one is around 1500cmp/h. All machines have tool changer with 10 positions and one tool for camera auto calibration. Only 5 different tools were used but can be used up to 10 different tools. On one machine you can put u ...

Marel concept 500 labelling machine, - top and bottom labelling machine

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk