137,374 used machines on RESALE, but how to find them? Machine Search
One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: ap ...
A custom-built slitting and straightening machine Grossmann/BFW for aluminum strip is available. Strip width: 35mm, Straightening unit: multi-roll, Knife type: rotary knives, Strip guidance: roller guidance, Tension control: KTC800A. Documentation available. An on-site inspection is possible.
Tenon cutting and slotting slotting PANHANS 1376 -used----------- Technical data ----------length of the base plate: 1,000 mm, sliding travel: 710 mm, size of the sliding plate: 295 x 225 mm, installation height approx.: 56 mm
UsedPaal RS40 residual roll saw / splitter and roll unwinders. Year of manufacture: 1998 Max. roll diameter 400 mm Max. roll length 2.500 mm Saw blade diameter 600 mm Drive power 19 kW Max. enclosure width approx. 1000 mm Max. machine length approx. 9000 mm Machine weight about 2,400 kg max. transport chain speed: 2.45 to 11.75 m/min. Throughput capacity depending on roll length and saw cut depth: 87.5 to 175 m/h
Used SCM S520 NOVA thickness planer useful working width mm. 520 Standard 4-knife shaft working height min/max mm. 3,5/300 max removal mm. 8 Double rubberized drive roller at the exit nr. 1 toothed drive roller at the inlet Electric Deck Lift 4-speed feed Star/delta starter Shaft rotation speed 4500 rpm Weight kg. 687 CE compliant
A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible.
Key data: 5 KW, 400 V
Viessmann Gas CHP Vitobloc 200 EM-5/13 Gas electricity and heat generators from 2013 with unknown operating hours, closed module. 5.5 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 40VS1 C 6/4 Manufacturer: Viessmann Model: Vitobloc 200 EM-5/13 Type: Natural Gas CHP Serial Number: 7459188 3 01862 105 Power [KWel]: 5.5 Power [KWth]: 13.5 Output [KWgas]: 20.2 AC Generator: Leroy Somer LSA 40VS1 C 6/4 Year of Make: 2013 Operating hours: unknown Dimensions LxWxH [m]: 1.50 x 0.80 x 1.30 Weight unit [kg]: 500
Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible.
Ref.nr. 00926 Name of the plant Struers Labopol Grinding and polishing workstation For sale is a professional grinding and polishing workstation Labopol for metallographic sample preparation. The system is suitable for laboratory, quality assurance and materials testing. Manufacturer: Struers Model Labopol 2 Year of construction Condition Technically OK Can be viewed under power Remark Grinding machine function with diamond grinding wheels + water cooling Ref.Nr 00927 Name of the system Struers Labotom-3 separator For sale is a Struers Labotom-3 precision separator for materials testing and metallographic sample preparation. The machine enables precise and reproducible cutting cuts. Manufacturer: Struers Model Labotom-3 Year of construction unknown Condition Good technical condition, can be demonstrated under power Remark Cutting device for grinding ...
Key data: 70 KW, 400 V
Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator, built in 2009, 56,814 operating hours, with silencer. 70 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial number: 700 02 0070 0033 0712 Engine: MAN E0836 E302 Engine power [KW]: 75 Power [KWel]: 70 Power [KWth]: 115 Year of Make: 2009 Hours: 56,814 Weight unit [kg]: 2,500 Dimensions LxWxH [m]: 3.4 x 0.9 x 1.80 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299162/7 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2009 Weight [kg]: 300
Key data: 110 KW, 400 V
Sokratherm Gas-CHP GG 110iSH Gas electricity and heat generator from 1997, with 27,000 operating hours, with control. Was taken out of service 15 years ago after maintenance. 110 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Marelli Motori M7B 250 MC 4, 200 KVA Manufacturer: Sokratherm Model: GG 110iSH Type: Gas CHP Serial Number: 712217 Engine: MAN E2866 E301 – 118 KW Electrical power [KWel]: 110 Thermal power [KWth]: 200 Gas capacity [KWgas]: 344 Year of Make: 1997 Hours: 27,000 Weight unit [kg]: 3,320 Dimensions LxWxH [m]: 2.80 x 0.90 x 2.20 AC Generator Marelli Motori M7B 250 MC 4 Manufacturer: Marelli Motori Model: M7B 250 MC 4 Type: AC Synchronous Generator Serial Number: MD-1990 Power [KVA]: 200 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 289 Speed [1/min]: 1,500 Year of Make: 1997
A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.
A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.
An automatic gKteso post-processing and deburring center is available. Technology: 6D, axes: 5+1, working dimensions X/Y/Z: 500mm/500mm/300mm, max. travel speed: 1m/s, repeatability: 0.05mm, path accuracy: 0.1mm, max. flatness: 0.02mm, chucks: 2-jaw/3-jaw/4-jaw chucks, machine dimensions X/Y/Z: approx. 2400mm/1800mm/2900mm, operating hours: approx. 12541h. Including pneumatic chucks, safety light curtain, exchange table and 6D technology. Documentation available. An on-site inspection is possible.
CONTROLS CNC controls FANUC 31I MODEL A BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes number of c-axes: 2 number of y-axes: 1 WORKING RANGE TURNING turning diameter (max): 230 mm bar diameter (max): 65 mm worpiece length max.: 700 mm MAIN SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 5000 /min spindle bore diameter: 65 mm c-axis: yes COUNTER SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 6000 /min c-axis: yes X/Z SLIDE tool fixture: Turret ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2800 mm space requirements -front/back-: 1630 mm total height: 2200 mm total weight approx.: 9000 kg ATTACHMENTS (TURNING) chip conveyor: yes coola ...
turning diameter over bed: 350 mm turning diameter over slide rest: 216 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 40 - 1800 U/min centre height: 170 mm spindle bore: 40 mm total power requirement: 4,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,0 x 0,85 x 1,6 m Centre lathe (lead screw and feed rod) - Digital readout - 3-jaw chuck (160 mm) - Spare jaws - Coolant system - Multifix tool post - 4 Multifix tool holders - Steady rest - Live centre - Chip tray - Chuck guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cat No.: 26-0064 Features Volume 1000 L Material No. V2A Exterior Surface IIID Surface inside IIID Total height 1845 mm Cylinder height 1250 mm Diameter 1130 mm Weight 184 kg Description Topsoil: Clapper bottom Threaded Socket DN50 Manhole CIP Connector Airlock connection DN50 Cylinder: Cooling jacket Insulation Level indicator Sample tap DN25 Dip Shaft Sleeve for Thermometer Underbody: Forward-drawn residual drain pipe with disc valve DN50 4 feet
We offer used accessories at a special net price. 40 x tripod/support leg, used = 15,00€/piece 127 x clevis/four-way head, used = 4,50€/piece If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Ulmer Straße 1 89614 Öpfingen Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Sharp TC11 Table Cutter Volume: 11 litres very good condition completely in stainless steel 2 courses 3 cutter head Machine comes from a hobby butcher who gave up for reasons of age despite its good condition, the device must be thoroughly cleaned before use Video about test run available
A complete Krones bottle cleaning and filling line is available. Throughput: 8000bottles/h, carousel pitch: 161mm, carousel diameter: 1800mm, filling valves: 50. This is a complete rinser and filler monoblock for glass and plastic bottles. Documentation available. An on-site inspection is possible.
Key data: 150 KW, 400 V
K+S Gas CHP Container GTK 140 Natural gas electricity and heat generators from 2017, 25,000 operating hours, in 25 ft sea container with three MAG. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LB4, 250 KVA Manufacturer: K+S (Kuntschar and Schlüter) Model: GTK 140 Type: Natural Gas Electricity and Heat Generator Serial Number: 01199 Power [KWel]: 140 Power [KWth]: 212 Engine: MAN E2876 E312 Motor power [KW]: 150 Year of Make: 2017 Operating hours: unknown Weight unit [kg]: 8,000 Dimensions LxWxH [m]: 6.0 x 2.45 x 2.9 MarelliGenerators MJB 250 LB4 AC Generator Manufacturer: MarelliGenerators Model: MJB 250 LB4 Type: AC Synchronous Generator Serial Number: MBM13972 Power [KVA]: 250 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 361 Speed [1/min]: 1,500 Year of Make: 2017 Weight [kg]: 705
TECHNICAL DATA: Working length: min. 350 mm – max. 3000 mm Working width: min. 20 mm – max. 230 mm Element thickness: min. 12 mm – max. 70 mm Feed speed: 10 to 50 m/min Installed power: 1.5 kW
A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible.
Ref.Nr. 00934 Designation of the system 6 x welding workstations Sweat source and Hand-welded pistones can be connected With CE Semi-automatic With turntable Manual Manufacturer unknown Model Schweiß M Pohl Year of manufacture 2011 and others Condition In Function
Key data: 1237 KW, 400 V
MWM Gas CHP Container TCG 2020 V12 Gas power and heat generator from 2016, AC generator from 2024, approx. 68,000 operating hours with E70, container with ancillary equipment (oil cooling, oil storage) and steam generators (500 KW). Heat exchanger on demand. 1,200 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: Marelli M8B 500 MB 4 B20, 1,487 KVA Complete plant: SES CHP double container plant Project number: P14297 Manufacturer: SES Energiesysteme GmbH Module type C40 HPC 1200 N DE Type: Gas CHP Container Engine: MWM TCG 2020 V12 Engine Serial Number: 2212741 Power [KWel]: 1,200 Output [KWgas]: 2,750 Voltage [V]: 400 Frequency [Hz]: 50 Engine power [KW]: 1,237 KW Year of Make: 2016 Operating hours: approx. 68,000 Weight unit [kg]: approx. 30,000 Dimensions LxWxH [m]: 12.2 x 5.0 x 5.1 AC Generator Marelli MJB 500 MB 4 B20 Manufacturer: Marelli Model No.: MJB ...
Key data: 510 mm, 1500 mm, 300 U/min
Hello, I get this lathe at the beginning of August. With a lot of accessories: steady rest, lathe chuck – clamping jaws, quick-change holder and.. Heidenreich & Harbeck Type Hanseat 480 Year of manufacture 1980 Center height 255 mm Turning diameter over support 300 mm Center width 1500 mm 24 speeds from 23.6 to 2500 n1/min Tailstock MK 4 Chuck F 250 Motor 380 Volt 11 kW Transport dimensions: Length 3200 mm Width 1200 mm Height 1550 mm Weight 2.5 to. Lathe Hanseat 480 incl. accessories St Description 1 instruction manual 1 Lynette small 1 Lynette large 1 4- Jaw chuck small 1 4- Jaw chuck large 15 quick-change tool holders Set designation 2 jaws for 4-jaw chuck 38 jaws for 3-jaw chuck
Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, s ...
4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a coolin ...
A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible.
Key data: 150 KW, 400 V
Wolf Gas CHP GTK 140E01 Gas electricity and heat generators from 2022, 0 operating hours (never run), with control and silencer. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: Marelli MXB-E 250 MB/4, 250 KVA Manufacturer: Wolf Model No.: GTK 140E01 Type: Natural Gas CHP Serial Number: 3260 Power [KWel]: 140 Power [KWth]: 216 Power [KWgas]: 384 Engine: MAN E2876 E312 Motor power [KW]: 150 Year of Make: 2021 Hours: 0 hours (never run) Weight unit [kg]: 3,500 Dimensions LxWxH [m]: 3.30 x 1.30 x 2.20 AC Generator MarelliMotori MXB-E 250 MB Manufacturer: MarelliMotori Model: MXB-E 250MB Type: AC Synchronous Generator Serial Number: 1033344 Power [KVA]: 250 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 361 Speed [1/min]: 1,500 Year of Make: 2021 Weight [kg]: 680
Description Item # 7526 – DOUBLE TWIST WRAPPER for comfit pieces, chocolate creams and sweets with solid or soft filling Manufactured by NAGEMA Model EU7 up to 300 pieces per minute, With appropriate parts would be suitable for product sizes 20 to 60mms long x 13 to 27mms wide x 8 to 20mms high,
Description Item #8817 – WAFER PRODUCTION LINE WITH CHOCOLATE ENROBING LINE (wafer stick oven and sheet wafer oven) Manufactured by HAAS/MORCOS Year 2020, Wafer line including : SHANGHAI KUIHONG FOOD MACHINERY FACTORY Wafer Roll/Tube Oven, suitable for both filled or hollow wafer rolls/tubes Also including a Mixing Machine, Pumping & Filling Machine, the Wafer Roll/Tube Oven, Cooling Conveyor, and a Ball Mill. SWA-31G Wafer Sheet Oven, plate sizes 290 x 460mms, 31-plates Wafer Sheet cooler type DEV-1.2 m One Spiral Contact cream spreading machine type STM Turning conveyor type WDB One Wafer book cooling tower type WKF 70 One Cream turbo mixer type TCM125 One Ejection Table for wafer blocks type ET One Wafer book cutter type MWDL Turbo dough mixer type TMN 120 Scraper machine type C40T High performance turbo mill type CS TU50-90 Stainless Steel 90degree Turntable, band width 500mms, foo ...
Description Item # 9358 - RUSK & CRUMB (Breadcrumb-Type Filler) PRODUCTION AND PACKAGING LINE Suitable for bakery crumb, coating crumb, and meat-industry filler manufacturing A complete, proven rusk and flake-bake production line, formerly processing 3 tonnes/hour of flour into 2.5 tonnes/hour of finished rusk and flake bake (used as a filler in sausages, pies, coatings and stuffing mixes). The line ran continuously until the site was sold in December 2025, with numerous safety upgrades installed throughout its operating life. Line includes: 2x Baker Perkins dough mixers – recently upgraded motors and gearboxes Dough sheet former – forms the dough sheet ahead of the oven Spooner oven – stainless steel panelling, three burners and controls renewed in 2024 Peg roller – breaks the biscuit sheet at oven exit Cracker – reduces biscuit to a manageable size for the next process 2x Mik ...
Overview This lot comprises two VIG pressure tanks of 5,000 litres each, built in 2019 by VIG Vertrieb Industrieller Güter (Kreuztal, Germany). The vessels are CE-marked pressure vessels according to EC pressure equipment directive 2014/68/EU and were last used as activated carbon filters in a brewery’s water treatment. Each tank is fitted with a filter star; the filter candles show light damage. The tanks are interconnected with DN 65 piping and come with butterfly valves for cleaning, draining and shut-off as well as vacuum/check valves. With their young year of construction and availability as a pair, the vessels suit filtration and pressure-holding duties in breweries and beverage plants alike. Technical data Manufacturer: VIG Vertrieb Industrieller Güter (Kreuztal, Germany) Year of manufacture: 2019 Number of tanks: 2 Volume: 5,000 l per tank Max. operating pressure (PS): 6 bar ...
Technical Data Max. Workpiece Diameter: 3,800 mm Max. Rotational Speed: 100 min⁻¹ Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 × 47 slots (94 slots total) Travel Paths X1-Axis (Right Support): 3,200 mm X2-Axis (Left Support): 2,800 mm Z1-Axis (Right Support): 750 mm Z2-Axis (Left Support): 750 mm Workpiece Spindle Speed Range up to 100 min⁻¹ Nominal Power: 67.4 kW Maximum Power: 202.2 kW Max. Torque: 71.6 kNm Max. Table Load: 35,000 kg Water-Cooled Motor Spindle Multifunction Head B-Axis with Stepless Positioning Swivel Range: 180° Driven Tools up to 6,000 min⁻¹ Hydraulic Clamping Direct Measurement System High-Pressure Cooling up to 70 bar Tool Magazines 2 Chain Magazines with 47 Slots Each Tool Diameter up to 120 mm Up to 150 mm with Appropriate Magazine Loading Max. Tool Length: 400 mm Max. Tool Weight: 20 k ...
Technical Data Max. workpiece diameter: 3,800 mm Max. rotational speed: 100 min⁻¹ Workpiece clamping: manual Chuck: Röhm Tool holder: Capto C8 Tool magazines: 2 × 47 slots (94 slots total) Travel Paths X1-axis (right support): 3,200 mm X2-axis (left support): 2,800 mm Z1-axis (right support): 750 mm Z2-axis (left support): 750 mm Workpiece Spindle Speed range up to 100 min⁻¹ Nominal power: 67.4 kW Maximum power: 202.2 kW Max. torque: 71.6 kNm Max. table load: 35,000 kg Water-cooled motor spindle Multifunction Head B-axis with stepless positioning Swivel range: 180° Driven tools up to 6,000 min⁻¹ Hydraulic clamping Direct measuring system High-pressure cooling up to 70 bar Tool Magazines 2 chain magazines with 47 slots each Tool diameter up to 120 mm Up to 150 mm with appropriate magazine configuration Max. tool length: 400 mm Max. tool weight: ...
turning length: 1000 mm turning diameter: 210 mm swing diameter over bed slide: 300 mm centre height: 167 mm spindle bore: 40 mm bed width: 210 mm turning speeds: 40 - 2500 U/min total power requirement: - kW weight of the machine ca.: 1000 kg. range L-W-H: 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60 ...
turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60- ...
turning length: 1000 mm turning diameter: 330 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 38.0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: DIN ISO 702-2 Nr. 4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1.5 kW weight of the machine ca.: ca. 610 kg. range L-W-H: 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped wit ...
turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 360 mm centre height: 180 mm turning speeds: 70-2400 U/min total power requirement: 2,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 2000x1500x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions The data ...
Folding tap pointer: . tube diameter: 5 - 20 mm tag length: 50 - 100 mm total wight: 1,4 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 63 mm square edge steel: 55 mm flat steel: 100 x 25 mm : engine: 380 V, 6,3 kW weight: ca. 2.450 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gefült mit 43 Aufnahmen height: 2.200 mm width: 1.200 mm weight of the machine ca.: 300 kg : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pointing milling machine: für Stangen carbide turnover plates: 4 Stück working area: Rund, Profil+vierkant mm working range: 80 (100) an 25 mm milling drive: 380/420V, 18,5 KW, 50 Hz kW revolutions per minute: Fräsantrieb: 1465 U/min : . clamping devices hydraulic pneumatic: hydraulisch infeed device: hydraulisch : ca. 5 lfdm x 300 mm : hydraulic power unit: Rexroth tank: 250 l coolant tank: mit Spänekasten l control panel: switchgear cabinet: mit Klimaanlage control: SIEMENS S 7-300 Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: ca. 1978 : für Stangenprofile und... : ... für Flachmaterial material thickness: max. 24 mm working length: 300 - 600 mm efective widths: 3 mal 170 mm drive motor: 400 V, 11 kW, 50 Hz : . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 455 mm turning diameter over slide rest: 285 mm turning length: 1.000 mm center height over bed: 225 mm centre distance: 1.000 mm digital readout: 2-Achsen ANILAM bed width: 330 mm spindle taper: KK 6 DIN 55027 spindle bore: 45 mm turning speed range: 16 - 1.000 U/min power requirement: 3,0 / 4,2 kW taper in tailstock-quill: MK 4 dia. of quill: 62 mm quill stroke: 145 mm coolant: voltage: 400 V total power requirement: 4,5 kW weight of the machine ca.: 1,95 t dimensions of the machine ca.: 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION! Machine is sold without a chuck. Upon request and for an additional charge, the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR The data for this ad was created with ModulMWS - the sof ...
maximum number of results exceeded
please refine your search
