wire and strip used for sale

Toprol - Batch of industrial bearings and bearing blocks 187KG Condition: unused Auction-ID: A1-46070-147

19x 6207-RS1/MT33BR196 SKF 1106x BB1-0219CA SKF 120x WC87504 SKF 50x 212.2ZN FAG 1000x 535697D FAG 200x 543664.C3 FAG 97x 549172 FAG 200x 6200ZNR FAG 111x 6303RSR. C3 FAG 54x 6307E. TVH. C4 FAG 14x EC-6901ZZ C3/2A NTN 580x 6000T1X Z CM NSK 23x 6206RS C4 Koyo 50x 6213Z NR C3 Koyo and more Auction-ID: A1-46070-65

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Root End Reducer B&Z Type WRP SO Well-preserved fully functional root end reducer made by Baljer and Zembrod. Built in 2004. Complete with control, disposal scraper conveyor straight approx. 8.0 m and ascending approx. 6.0 m. Including hydraulic log ejector. The hydraulic power unit with 15 kW is included in the scope of delivery, we also have the remote control for the control of e.g. sorting trolleys. Complete steel substructure. Length of milling shaft 1,380 mm. Drive of milling shaft with 75 KW motor. Feed motor slewing gear with 4.5 kW. Drive scraper conveyor with 3.0 kW.

Groninger plastic bottle filling & capping line comprising ZSB 2000 empty bottle unscrambler, DFV 10005Q in-line filling machine with 10 filling stations with cross-feed function, dosing range of 5 to 1000 ml, bottle height from 30 to 250 mm, transport cup dimensions (pucks) 108 x 80 mm and KVK 106 rotary capping machine with 6 capping stations with ZSK 1500 cap sorter and a lift-off conveyor for the transport cups (pucks), capacity up to 150 bottles per minute

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Working area: 1800 x 1000mm; dimension machine: 2600 x 2100 x 1200mm; automatic material feeder dimension: 2700 x 1200 x 1500mm; Auction-ID: A7-45992-140

2 packs Rock cupels with all. retinato diam. 140 mm th. 30 mm MTL 7; 1 pack diam. 160 mm th. 30 mm MTL 7; + 3 pcs various sizes - - Footboard 80 x 120 x H100 Auction-ID: A7-46421-36

Measuring and scribing tools Lot of 13 pieces With ATORN, Mitutoyo, PREISSER and othersMixed lot of 13 measuring and scribing tools for workshops, toolmaking and quality control. Included are a ATORN hair ruler 500 mm DIN 874/0 INOX, a Mitutoyo caliper 150 mm, a U-screw gauge with adjustment bracket, several precision angles as well as scribing tools and gauges. Auction-ID: A7-46417-294

Lots of industrial drills & modular systems (Sandvik, Kennametal) Mixed tool set of high-quality industrial drills: – several Sandvik WSP drills R411.5-27534 – Kennametal KSEM modules + interchangeable heads – various solid carbide twist drills Holex / Sandvik– large HSS/PM twist drills up to approx. Ø30 mm – reamers and special drills 1) Sandvik Coromant several WSP drills R411.5-27534, Ø ~27 mm, beam P20 various large twist drills 18–30 mm Single solid carbide drills in a yellow case Drills in the range 20–25 mm (coated, TiN/TiAlN) 2) Kennametal – SE-Drill Modular KSEM1983HPM – Ø19.83 mm KSEM1830HPM – Ø18.3 mm KSEM1100HPM – Ø11.0 mm several modules + interchangeable heads KC7235 modular holders (2 pieces) 3) Holex solid carbide twist drill bit 122310 19.5 mm other solid carbide twist drills 17–20 mm 4) Other tools Indexable insert drills (with mounted  ...

2× Machine vise BB 120 and 90 mm     •    Design: machine vice     •    Adjustment: manual, degree scale available (with a vice)     •    1× jaw width approx. 120 mm     •    1× jaw width approx. 90 mm     •     Solid cast/steel construction     •    Manual spindle actuation Auction-ID: A7-46417-107

Manufacturer: Mitutoyo Type / Model: Digital measurement setup with Digimatic dial gauge ID-C150B Manufacturer's specifications dial gauge • Model: ID-C150B • Code no.: 543-460B • Measuring range: 0 – 50.8 mm • Resolution: 0.001 mm • Measuring system: Absolute (ABS / INC) • Display: Digital • Data output: Digimatic • Power supply: Battery (button cell, inserted) • Country of manufacture: Japan Measuring setup / scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Precision measuring stand with cross arm • Mitutoyo Digimatic mini processor / printer DP-1VR • Granite measuring plate (integral part of the device) • Foot switch • Connection cable • Mitutoyo mini processor / printer DP-1VR (incl. connection cable) Technical data granite plate • Material: granite • Size: approx. 400 × 400 × 60 mm (L × W × H) • Solid design • Flatness clas ...

\" Heavy workbench 2000 x 700 mm with 6 drawers and cabinet and Sandvik Coromant Capto C6 clamping block / pick-up block type: 391.530-C6 Use: For securely holding and fixing Coromant Capto C6 tool holders (e.g. for presetting, storage or workbench mounting). Stable industrial workbench with solid wooden worktop. Design: • 1-door base cabinet left • 6 drawers right (3 + 3) • Sheet steel body • Solid wood worktop Dimensions: 2000 x 700 x 860 mm Condition: Used with clear signs of use. Worktop with pressure marks, scratches and wear on the edges. drawers functional. Without content and without keys. Overall dimensions: approx. 2000 x 700 x 860 mm (L x D x H) Type: Steel substructure with wooden top Colour: Body light grey / Front turquoise \" Auction-ID: A7-46417-376

4 pack insulation pipe K-FLEX 25-089 AL CLAD; 1 K-FLEX EC/1.10 insulating tube box - Packages may not be complete - Footboard 80 x 120 x H180 Auction-ID: A7-46421-33

Mitutoyo digital measuring system consisting of an ABSOLUTE digital dial gauge ID-C112B, mounted on a measuring stand with granite top, including Digimatic mini processor DP-1VR with integrated print function. The system is intended for precise measuring, comparison and testing tasks in the measurement and quality sector. The granite slab is part of the measurement setup and is included in the scope of delivery. Condition • Used Scope of Delivery • Mitutoyo Digital Dial Gauge ID-C112B • Measuring Stand • Granite Slab (300 × 200 × 50 mm) • Digimatic Mini Processor DP-1VR with Push Function • Connection Cable Digital Dial Gauge • Manufacturer: Mitutoyo • Model: ID-C112B (ABSOLUTE) • Code: 543-250B • Measuring Range: 0 – 12.7 mm • Resolution: 0.001 mm • Measuring System: Absolute Measuring System (ABS) • Display: Digital • Data Interface: Mitutoyo Digimatic ...

\" Mixed lot of measuring screws and measuring equipment – 5-part – mechanical – special designs – used 5-part bundle of mechanical measuring equipment, consisting of shackle measuring screws and special/special measuring screws (including with a large round scale). • Type: mechanical measuring screws / special measuring screws • Reading: usually 0.01 mm • Measuring ranges: mixed (e.g. 5–30 mm, see pictures for other ranges) • Design: \"Metric \" Auction-ID: A7-46417-221

Stock 8 pcs: 4x FWXT20ABTV3 + 4x FWXT15ABTV3 - - 125 x 90 x H110 cm Auction-ID: A7-46421-8

2x boxes; Blue tube for air and brake fluid Auction-ID: A7-45992-146

\" Mitutoyo Digital Dial Gauge ID-C150B with Measuring Stand and Granite Measuring Plate Digital dial gauge from Mitutoyo with associated measuring stand and granite measuring plate. The unit is set up as a complete measuring station and is delivered together. • Used • Dial gauge can be switched on, display available • No calibration or measurement test carried out • Mechanical parts movable • Optical traces of wear present Scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Measuring stand with bracket • Granite measuring plate Digital dial gauge • Manufacturer: Mitutoyo • Model: ID-C150B • Code no.: 543-460B • Measuring range: 50.8 mm • Resolution: 0.001 mm • Display: Digital • Functions: Zero/ABS, Preset, mm • Origin: Made in Japan Measuring stand • Mechanical measuring stand with round column • Height adjustment via clamping • Side boom f ...

11x VKBA1361 SKF 1x VKBA1436 SKF 1x VKBA1436 SKF 9x VKBA1485 SKF 1x VKBA3907 SKF 1x VKBA3907 SKF 8x VKBA625 SKF 5x VKC2083 SKF 140x VKC3620 SKF 1x VKMA04200 SKF 1x VKPC83428 SKF 1x VKPC83615 SKF 3x VKPC84208 SKF 2x VKPC84618 SKF 2x VKPC85611 SKF 3x VKS6150 SKF 2x F-112215 INA 4x F-203222.5 INA 9x F-83001.2 INA 1x 38KWD02G3CA126 NSK 10x CBU472921C Koyo and more Auction-ID: A1-46070-354

Stable, vertical unwinding and cutting stand for corrugated cardboard, suitable for rolls up to approx. 100 cm high and approx. 60 cm web width. With integrated cutting unit (OCS) and guide profiles for clean unwinding.   Manufacturer marking: OCS (label \"OCS 98004\") Material width: approx. 600 mm (measured) Roll height: approx. 1000 mm Suitable for: 1-wall or 2-wall corrugated cardboard from the roll Auction-ID: A7-46417-33

Lot of inserts consisting of a mixed stock of different inserts in original packaging. Included are different manufacturers, geometries and ISO grades. Partly unopened, partly opened packaging. The item is handed over in its entirety as shown. Content (excerpt from visible brands/types): Sandvik Coromant – numerous ISO plates (PMKNSH), various geometries and grades (e.g. 1044, 12055164, 880-05 06 05H-C-LM, etc.) Walter – ISO plates, including WXP45 and other grades Wohlhaupter – inserts for fine boring tools (XOMT12T308, WHC102 and others) Korloy – various milling and turning inserts Wetec / JD-Tools – ISO plates of various geometries Other manufacturers such as Innotec, Nine9 etc. General features: mixed stock of indexable inserts many original packaging available partly full, partly opened packs Manufacturer mix, mainly branded goods Condition: mostly unused (visible), indiv ...

Industrial control terminal in steel design, free-standing mounted on a column. Equipped with lockable front door with viewing window as well as pull-out keyboard and mouse tray. Inside there is a monitor, PC hardware as well as connection and power supply components     •    Type: free-standing operating terminal     •    Material: sheet     steel •    Front: viewing window, lockable     •    Keyboard tray: pull-out     •    Equipment: Monitor, PC, keyboard, mouse (without functional guarantee)     •    Power supply: 230 V     •    Mounting: floor-standing (stand) Size: approx. 800 × 750 × 1,650 ...

Including welding machine, pressure vessel, welding helmet and jacks Auction-ID: A1-41682-69

Lot solid carbide drills and thread mills Manufacturers: SIEVERT, HOLEX, Sandvik, WALTER and others Drills: from 3 to 11 mm Thread mills: from M3 to M12 approx. 10.0 kg Auction-ID: A7-46417-16

\" Double-spindle deburring machine / grinding and brushing machine Stationary deburring or grinding machine in heavy industrial design with two horizontally arranged spindles. A main spindle with clamped abrasive media, an additional spindle (according to the switch \"additional spindle\") can be switched on separately. Machine with protective tray/work tray, emergency stop, main switch and separate control cabinet. Extraction connection available (pipe connection on the side). Control panel with: • Main switch • Emergency stop • On/off button • Switch additional spindle • Brake switch • Operating hour meter (Kübler Codix) Solid welded steel construction, can be screwed together stably. Used condition with usual signs of wear. External dimensions approx.: 1200 x 1100 x 1300 mm (W x D x H) Double-spindle design Electrical connection via separate control cabinet Extraction  ...

\" Large batch of measuring and testing equipment – angles, thread gauges, hair angles, scribing tools, accessories Lots of various measuring and testing equipment from workshop stock. Included are hair angles (partly TGL, Made in GDR), precision angles, several small stop angles, thread gauges (including Whitworth 55°), feeler gauges, scribing tools, a Mitutoyo dial device (5 mN), various cutting and blade tools as well as numerous protective cases. • Hair angle with marking TGL 6163/1 – Made in GDR • Several precision angles in different sizes • Thread gauges \"Whitworth 55°\" – Made in Germany • Feeler gauge set (0.05 mm visible, among others) • Mitutoyo measuring device, type 546-113, 5 mN • Various small L-brackets (different dimensions marked) • Marking blades / cutting tools in wooden case • Some with protective cases \" Auction-ID: A7-46417-316

\" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm \" Auction-ID: A7-46417-373

Bundle of compression springs for tool and mould making   The pictured cabinet is not part of the offer. Quantity: approx. 112 pieces of storage viewing containers, each filled Content / Description • Extensive collection of compression springs for tool and mould making • Different diameters, lengths and spring thicknesses • Sorted in mixed colour storage viewing containers • Partly labelled (internal article numbers / dimensions) • Material apparently spring steel, suitable for industrial use No individual counting, no measurement, no variety or completeness guarantee Sale exclusively as a complete bundle, no partial sale.   The sale is without a cabinet   Contents: Sorted stock of compression springs for tool and mould making. The springs are labeled according to spring class (light, medium, heavy, extra heavy), outer diameter and free length.  ...

Tool holders and clamping adapters for BAZ special tool holders and clamping adapters for machining centres of the STAMA-MC series (including MC 440). Stock: Mixed lot with approx. several tool holders, chucks, reducers and spindle adapters. Typical designs include: STAMA special adapter with bayonet/form-fit contour Chuck with slotted clamping heads Reduction adapter for STAMA unit interfaces Mounting elements for special tools Tool carrier with STAMA logo and part numbers (including 150 864 / 150 865) Auction-ID: A7-46417-30

Item (3×) Measuring Tables / Measuring Stands – Clamping and Testing Fixtures Lots consisting of three measuring tables or measuring stands for measuring, testing and adjustment work in toolmaking, fixture construction or quality assurance. Stock:     •    2× heavy measuring stands     •    solid cast base plates     •    vertical column guide     •    height-adjustable holding arms with fine adjustment     •    suitable for holding dial gauges, Buttons or fixtures • 1× measuring table / clamping plate     •    solid cast design     •    engraved grid for positioning      ...

\" Scribing and control plate 200 × 200 mm, cast design with feet Scribing or control plate in square design. The plate serves as a flat support and reference surface for testing, marking and control work in toolmaking, quality assurance or in the workshop. Surface finely worked, all around with chamfer. Underside with four cast feet for a stable support. Dimensions: 200 × 200 mm Height: approx. 55 mm Material: cast body with machined surface Design: with feet \" Auction-ID: A7-46417-335

3 PCS box for QB1 built-in control unit code CM010Q; 4 PCS Cartridge Embroidery P-PX-350-SC 40/60 AER; miscellaneous fittings - - 90 x 120 x H150 Auction-ID: A7-46421-29

Manufacturer: Metall Meister Type / Model: not known / not specified Mobile tool trolley / assembly table with cast aluminium chipboard (T-slot) Mobile tool trolley / work table Steel frame construction with castors, cast aluminium plate as work surface Design of the work surface: Cast aluminium plate with T-slots Suitable for clamping, assembly and straightening work Condition: Used Work surface: approx. 1200 × 800 mm Auction-ID: A7-46417-74

\" Mixed lot of used milling tools, mainly face milling cutters, shape milling cutters and end mills in various designs. The batch consists of several milling tools of different types and sizes, some with original or storage boxes. Net weight: 13 kg \" Auction-ID: A7-46417-197

\" Industrial bench grinder / brushing machine with 3-jaw chuck and accessories Heavy, free-standing industrial grinding or brushing machine in solid cast iron design. Equipped with: • 3-jaw chuck • Side protective cover • Mechanical feed option • Electric foot switch (emergency stop version) • Multiple grinding/brushing rollers (see pictures) Machine was used for grinding/brushing. Condition: Used, heavily soiled, uncleaned. Sold as shown with existing accessories (rollers). Type: Stand-alone machine Drive: Electric motor (belt drive) Clamping adapter: 3-jaw chuck Operation: Foot switch Construction: Heavy machine body made of cast iron • Dimensions in mm (LxWxH) approx. 600 x 750 x 1100 mm \" Auction-ID: A7-46417-361

\" Industrial workbench with cabinet and drawers – Metal Meister Heavy industrial workbench in sturdy steel construction with solid wooden worktop. Version with: • 1-door base cabinet left • 3 drawers right • Rear wall strip • Solid steel frame Condition: Clearly used, heavily soiled. Worktop with signs of wear, scratches and bruises. Typical workshop use. Sale without content. Manufacturer: Metall Meister Grimma GmbH Construction: Welded steel Worktop: Multi-layer wood panel • Dimensions in mm (LxWxH) approx. 1500 x 700 x 850 mm \" Auction-ID: A7-46417-360

\" MASSI Prism and Clamping Block Set – 3 Pieces – for Round Material / Measuring Station Included: • 2 Solid Cross Prisms (heavy version) • 1 MASSI Step Prism 62 mm (No. 0/238) • 1 Clamping Bracket \" Auction-ID: A7-46417-310

\" Item: Height measuring and scribing device / precision measuring stand Manufacturer: unknown Type / model: unknown Condition: used, good mechanical condition • Solid cast iron base with round support/reference plate (Ø approx. 57 mm) • Vertical column with adjustable measuring arm • Fine adjustment via lateral levers / clamps • Front mount for dial gauge, probe or scribing tip \" Auction-ID: A7-46417-228

\" RENISHAW TP200 Probe Set with Accessories and Test Certificate Complete probe set from RENISHAW consisting of a TP200 probe (SF MOD) including several M2 probe inserts (straight version, different lengths) and original transport case. The probe has been tested on the RENISHAW Probe Test Rig (Test Passed). A detailed test report / measurement protocol is included and documents the repeatability as well as the preferred movement (pre-travel). Condition / scope of delivery • Condition: used, very good • Probe tested, test passed • Probe inserts mostly new / unused (orig.packaging) Scope of delivery: • RENISHAW TP200 probe (SF MOD) • Several M2 probe inserts • Original case • Original test certificate / measurement protocol • Manufacturer: RENISHAW • Type: TP200 SF MOD + TP200 • Serial number: 4W9T83 • Stylus length (reference): 50 mm • Probing force: 2 g • Te ...

Marking plate / measuring plate with tripod and holder Used marking or measuring plate with attached tripod and adjustable holder, suitable for marking, testing and measuring work in tool and machine construction.     •    Design: marking plate / measuring plate     •    Surface: finely machined, grid structure     •    Dimensions plate: approx. 250 × 360 mm     •    Plate thickness: approx. 34 mm     •    Material: Steel / cast     iron •    With column stand and adjustable holder Auction-ID: A7-46417-109

Including wheel clamp, chain grinder, hex key set, jumper cables Auction-ID: A1-41682-85

\" Bundle of collets and various tools (including reamers, twist drills, shank tools). The lot consists of several collets (in plastic boxes) as well as a mixed stock of tools such as reamers, drills and other shank tools in different dimensions. Net weight: 10 kg \" Auction-ID: A7-46417-196

REDI 125 - 87° 30 red tube stock (36 pcs); 31 pcs REDI 125 SDR 41 red color; 2 pcs REDI 160/200 SDR 41 PVC red color - - Footboard 90 x 120 x H90 Auction-ID: A7-46421-35

10 PCS kit adapt. warm. SR. A1G4-D9G4 code 016057X0; 2 PCS casing kit mod. 24; 1 PC casing kit mod. 30; 2 PCS Domi Compact connection protection - - 1 platform 80 x 120 x H160 Auction-ID: A7-46421-31

Including pulley pullers, grease guns, crimp socks, soldering wire, motor batteries and hydraulic jacks. Auction-ID: A1-41682-84

\" Lot of 2 pieces of industrial vacuum cleaners / wet and dry vacuum cleaners consisting of 1× CARRERA and 1× manufacturer unknown. – 2 industrial vacuum cleaners on chassis – metal containers – hose connections – mains operation – on/off switch on the device head – accessories partially available Scope of delivery: – 1 × industrial vacuum cleaner CARRERA – 1 × industrial vacuum cleaner, manufacturer unknown – accessories as shown – Device 1: Manufacturer CARRERA– Voltage: 230 V / 50 Hz – Power: max. approx. 2 × 1,080 W (according to the nameplate, information without guarantee) – Device 2: Manufacturer unknown – Technical data not clearly recognizable \" Auction-ID: A7-46417-143

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...