wire and strip used for sale

Equipment: Heatable/coolable,Condition: used,Volume: 13,650,Design: rectangular,Base: feet,Number of feet: 7,Heating/cooling (filter bar): available,Temperature control inside: cooling plate,Total height: 2,780,Total width: 1,450,Total length: 4,400,Type plate: No,Outlet: DN40 DIN 11851,Remarks: 3 cooling plates inside the tank (1 x loose, see photos) 1 manhole approx. 340 x 440 mm in the front floor smaller dents in the top floor, last purpose: wine storage,material in contact with the product: V2A 1.4301 (AISI304),material temperature control system: V2A 1.4301 (AISI304),material feet:

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 8,800,Design: rectangular,Stand shape: feet height adjustable,Number of feet: 4,Total height: 3,700,Total width: 1,580,Total length: 2,600,Type plate: No,Equipment: Level indicator (without guarantee), Disc,Outlet: DN65 DIN 11851 ,Remarks: 1 manhole approx. 325 x 420 mm in the front floor Container were professionally cleaned and overhauled by the manufacturer in 2024 Factory new residual drain valves (reduce the size screwed on the Outlet on DN 50 DIN 11851 (with disc valve)) and manhole seals were installed

Condition: used,Volume: 2,500,Design: oval,Base: Feet,Number of feet: 6,Cylindrical length: 2500,Total height: 1,850,Total width: 730,Total length: 2,800,Nameplate: No,Equipment: Disc,Outlet: DN40 DIN 11851 ,Remarks: 1 manhole approx. 320 x 420 mm in the front floor 2 slightly different designs: Variant 1 with stacking frame and reinforcement strut inside can be used to stack variant 2 (without frame) Containers were professionally cleaned in 2024 and overhauled brand-new residual drain valves (DN 50 DIN 11851 with disc valve) and

Condition: used,Volume: 1,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Diameter inside: 900,Cylindrical height: 1,460,Total height: 2,100,Type plate: No,Equipment: disc,Outlet: DN40 DIN 11851 ,Remarks: Probably 1 spray head inside the tanks,Last purpose: Brewery,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Current interferer: No,Bottom bearing: No,Current interferer: No

Manufacturer: Waldner Process Systems,Condition: used,Volume: 1,000,Topboard: open with loose lid,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 990,Cylindrical height: 1,260,Total height: 1,850,Type plate: No,Equipment: disc, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Tanks slightly out of round due to their design Container with smaller (sometimes also somewhat stronger) dents Partly the container feet are pressed into the lower bottom Plastic (2 containers are missing lids, one lid has holes in the lid

Key data: 4 KW, 400 V

Vaillant Gas Generator (mini-CHP) Eco-Power 4.7 Natural, bio or liquefied gas electricity and heat generators from 2008, unknown operating hours, Engine defective. 4.7 KWel x 1,500 rpm, 400 V/50 Hz. Manufacturer: Vaillant Model: Eco-Power 4.7 Type: mini natural, bio or liquefied gas CHP Serial number: 210801336006 0089000249N1 Power [KWel]: 1.5 – 4.7 Power [KWth]: 4.7 – 12.5 Current [V]: 400 Frequency [Hz]: 50 Year of Make: 2008 Operating hours: unknown Weight unit [kg]: 300 Dimensions LxWxH [m]: 1.20 x 0.80 x 1.25

Seydelmann Bowl Cutter -Type: K 126 H AC 8 -Power: 86 kW -Capacity: up to 3000 kg/h -Bowl capacity: 126 liter -Continuous speed control -Maximum knife speed: 5250 rpm/min -Touchscreen control panel -Original electrical cabinet -Knife set included -Working hours: 1800 -Year of manufacture: 2016 -Cutter dimensions: 2650 x 1800 x 2300 mm -Cabinet dimensions: 1650 x 600 x 2150 mm -Made of stainless steel -Condition: Used in very good condition, ready to work

- In stainless steel - Standing on feet - Material: 1.4301 / AISI 304 - Content: approx. 5,000 litres Equipment: - Square manhole - Residual drain, ball valve NW 40 - Clear drain, ball valve NW 40 - Stand display - Kosthahn - Dom NW 500 - In good condition Dimensions: - Width: 1 400mm - Depth: 1 800 mm - Sheath height: 2 500 mm - Ground clearance: 150 mm - Total height: approx. 2900 mm

A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.

Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation

Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis -Spindle bore approx. 42mm -Quick-change holder -Thread/Metric/Inch etc. -Tailstock MK 4 -Electric lining protection -Three-jaw chuck -Swarf back wall LxWxH 2.4x1x1.7 meters / Weight 1600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant

Frey K 120E Filling Machine, Vacuum Filling Machine, with twisting gear, new vacuum lid (the photos are still the old one), Connection 400V, weight approx. 470kg, good used condition, functional

A horizontal flow pack packaging machine RGD Mape is available. Packaging speed: 30m/min, max. packaging capacity: 100packages/min, product length range: 30mm-450mm, product width range: 10mm-240mm, product height range: 10mm-120mm, max. film width: 600mm, max. film outer diameter: 350mm, film core diameter range: 60mm-110mm, max. film roll weight: 35kg, machine weight: approx. 450kg. Documentation available. An on-site inspection is possible.

Fully automatic bread slicer MHS Type: MHS IDEAL SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm automatic bread grippersuitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process. Clean without having to move the machine 230 Volt / 1.0 kW / 4.8 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2011 Function checked, machine ready for immediate use!

Used Plastic - Tube Filling and Sealing Machine Manufacturer: TGM Type E250 MATIC Year of construction 2006 Capacity: 800 – 3,200 tubes / hour Tube height: 50 – 235 mm Diameter: Ø 10 mm – 50 mm Closure: Hot air device (HA) Tube Loading Station with Magazine, Tube Alignment, Presence Control Tube, Tube Centration, Filling Station, Hot Air Group, Tube Coding, Tube Cutting Station, tube output, Various format sets and spare parts

MultiFlex superfinishing machine for machining cylindrical and wave-shaped workpieces with superfinishing belt. Machine type: Multiflex 722/2 Machine No.: 770041 Technical data Superfinish strip processing of handlebars Workpiece length: max. 1000 mm Workpiece diameter: max. 100 mm Ball screw diameter: max. 35 mm Condition: Technical – good / Optical – used (Pictures partly similar)

BaseFlex 1300 superfinishing machine for machining crankshafts and camshafts. Machine type: BaseFlex 1300/1 Machine No.: 770046 Technical data Superfinish strip machining of crankshafts and camshafts Center width: max. 1300 mm Stroke: max. 180 mm Loading height: max. 1000 m With pallet conveyor Condition: Technical – good / Optical – used (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

Nano superfinishing machine for surface machining of gears, sealing components, injectors. Machine Type: Nano Machine No.: 770057 Technical data Superfinish plan machining Standard version with fire extinguishing system Workpiece length: max. 150 mm Workpiece diameter: max. 100 mm Processing diameter: max. 50 mm Meitec In-Process Measurement Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex Machine No.: 780695 Technical data Superfinish Stone Processing Outer diameter: 20 – 200 mm Inner diameter: min. 10 mm Width: max. 130 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex 725-727/1 Machine No.: 770062 Technical data Superfinish Stone Processing Workpiece diameter: max. 200 – 650 mm Workpiece width: max. 100 – 250 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinishing machine RacePro 4000 machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RacePro 4000 Machine No.: 780698 Technical data Superfinish Stone Processing Outer diameter: max. 4000 mm Inner diameter: min. 1200 mm Width: max. 400 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinish machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RaceX Machine No.: 780700 Technical data Superfinish Stone Processing Outer diameter: max. 320 mm Inner diameter: min. 40 mm Width: max. 260 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360034 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360039 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360041 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Factory New (Pictures partly similar)

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., , Type of Machine: Butter Packaging Machine, Capacity: ± 600 Kg/h, Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height, Weight: 250 grams, Machine Weight: 840 kg, Packaging type: Aluminium and Parchment Paper , Motor power: 1,5 kW

Manufacturer: Mydata Model: MY12 Year of Manufacture: 2006 Type of Machine : Pick and Place Machine Condition: Good running condition Software Version: 2.9.14c Heads and Tools - Hydra Head - 21,000 placements - Midas Head - Mount Tools - DVC Camera - 9 Magazine Positions - Tray Wagon Magazine - capacity for 5 JEDEC Trays Active Options - Optical centering - Electrical two pole test - Electrical transistor test - Z High speed - Conveyor HYDRA - HYDRA High Speed - Autoteach - Linescan for Z MYSpeed Included Feeders and Magazines - 7x Mydata L-014-000IC - Tape Magazine TM8C (Original, Tested) - 1x Mydata L-014-0002C - Tape Magazine TM12C (Original, Tested) - 1x Mydata L-014-0400C - Tape Magazine TMC Flex (Original, Tested) - 2x Mydata L-014-0418 - Flex Feeder 2 x 16 mm (Original, Tested) - 1x Mydata L-014-0419 - Flex Feeder 1 x 24 mm (Original, Tested) - 1x Mydata L-014-0016 - Vi ...

Kieserling WRUW1 bar straightener for 5 -30mm bar diameters. Speed 40m/min. New set of spare straightening rolls

Complete packing line for liquid/gel products in sticks, comprising: Inever PH6/8 - 8 lane stick pack machine with 8 rotary piston pumps, currently set up for sticks of 23mm width and max. 160mm length, with filling volume of 10 – 14 ml, with adequate format parts, sticks of 17 to 35 mm width can be processed, reel diameter 600mm, reel width 640mm, fitted with Allen Coding device, electrics 400V/3Ph/50/ 60Hz, power consumption 10kW, required air pressure 6 bar, machine floor space approx. 2200 x 2100mm (WxD), machine height approx. 3100 mm, machine net weight approx. 2850 kg. Enflex ENF11 horizontal intermittent-motion cartoning machine, carton size from 50 x 50 x 15mm to 125 x 180 x 40mm (or 125 x 140 x 60m). Includes pre-folded leaflet inserter, Nordson ProBlue hot-melt unit for glue closure of the carton flaps, output up to 60 cartons per minute, electrics 400V/3Ph/50 Hz, power co ...

Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Included Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates Documents available

x-travel: 1200 mm y-travel: 400 mm z-travel: 460 mm table-size: 1500 x 400 mm control: konventionell tool adaptor: SK40 turning speed range: 45 - 2000 U/min quill stroke: ja mm total power requirement: kW weight of the machine ca.: 3,2 t dimensions: 2,8 x 2,5 x 2,1 m Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system - Horizontal milling attachment - Chip guard - Chip trays - Hydraulic machine vice - Machine light - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Handtmann VF50 is a smaller sized vacuum portioning machine making it suitable for butchers, pet food producers, small goods producers looking for a reliable and fast way to accurately portioning, straight filling product such as mince& sausage meat, cookie dough as well as being capable of handling a wide range of products. Filling capacity 2,600 kg/h Filling pressure up to 55 bar Portioning and linking capacity: 25 g = 420 port./ min 50 g = 350 port./ min 100 g = 250 port./ min 200 g = 160 port./ min Portioning range: 5 – 100,000 g Hopper Capacity: 80 litres Control system: Digital Monitor Connected load: 4 kW Weight:450kg Dimensions: Width:70 Length: 90 Height: 165

Used Karl Schnell 595SE vacuum stuffer designed for industrial meat processing operations. This machine is used for precise portioning and vacuum filling of ground meat mixtures into casings or containers, helping reduce air pockets and improve product consistency and density. Built with durable industrial components, the 595SE is suitable for sausage production and other processed meat applications in commercial food processing facilities. The vacuum filling system helps maintain product quality and efficiency during high-volume production. in great working order, the loading is for standard loading buggies 400 L capacity. Can ship anywhere

System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg., Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on con ...

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...

Machine for cartoning glass bottles, for packing the carton packages on trays with subsequent shrink film wrapping., Additional title: Five‑step machine, Capacity: 26000 bo/min when packing 24 x 0.33 litre bottles, Cycle time: 18 cycles/min when packing 24 x 0.33 litre bottles, Formats: Trays with 4 x six-packs or 3 x eight-packs for 0.33 litre bottles, boxes with 20 x 0.5 litre bottles also possible, Features: Tray erector/adhesive application (Nordson ‘Problue Flex’, built in 2021), carton packer, tray packer, shrink film machine, drying tunnel, date coding (best-before date marking)

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers., Additional title: combination filter, Capacity: 12000 l/h, Plate size: 100 cm edge length, Length: 7000 mm, Width: 1500 mm, Height: 1500 mm, Position: horizontal, Base construction: mounted on steel frame, standing on feet, Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates