wire and strip used for sale

Model TS 38 plus Circular Knife Machine Tabletop machine Stainless steel version, Knives newly sharpened and coated Manual operation Disc thickness adjustable from 3 - 20 mm Dimensions: 950 x 660 x 500 mm, WxDxH Bread dimensions max: 370 x 200 x 160 mm L x D x H DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned with 6 months warranty More bakery machines in stock!

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

centre height: ca. 150 mm centre distance: 1300 mm : vorhanden diameter: ca 250 mm digital readout: 1x make: Heidenhain u. Werkzeug-Sc serial number: 63-06 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Label and cap remover machine from PET bottles: 3 x 1 m diam. Grille hole: 50 mm, axle rpm: 700 rpm, engine: 37 Kw (50 hp). Year: 2016.

Movidyn inverter and motor

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the co ...

Dadaux TITANE 45 Liter Cutter Stainless Steel used Stainless steel cutter with 6 cutter head and knife shaft brake Two speeds for knife shaft and bowl Machine has the following defects: Screw for plaster opening is missing 4 feet missing Noise protection cover broken Main switch toggle broken Lamp cover of the control panel is missing Bowl runs slightly out of round The shortcomings have already been taken into account in the pricing Video about test run available

Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

Type MX5116T+ V-380 Work table dimensions 1100x700 mm Sliding table 1085х250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 466 kg Price 3060 Eur (EXW Jonava, Lithuania)

Handtmann VF 608 Plus, vacuum filling machine for filling, portioning, linking, with servo drive, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., MC control (colour), 10243 operating hours, refurbished condition.

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum filling machine Vemag Robby Type 136 Filling, portioning, linking PC-Control AC Servo drive Including linking device Filling performance: depending on the goods up to 2700 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Vacuum filling machine Vemag Robby 2 Type 135 Filling, portioning, linking PC-Control Including loading device for 200 ltr. bins Including linking device Filling performance: depending on the goods up to 3000 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Seydelmann bowl cutter K 60 AC-8, year manufacture 2009, 60 liters bowl cutter, almost completely made of solid stainless steel, operation via knee lever switches, separate digital control COMMAND 1000 K in stainless housing, noise absorbing cover of special polycarbonate, central point of lubrication for knife shaft, balanceable and exchangeable knife head, 6 steplessly pre-programmable forward knife speeds, 2 reverse mixing speeds, 2 separate bowl speeds, separate control box of stainless steel with built-in main-switch, knife shaft brake electrically operated

Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.

Bowl Cutter Seydelmann K 40 Ultra 40 liters bowl volume Operation via knee lever switches DGA control Noise reduction cover central point of lubrication Knife head with six knives Two knife speeds Two bowl speeds Two mixing speeds forwards

max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 390 x 270 x 760 mm corner cutter: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper size: 102 x 142 cm dimensions of press (L x W x H): 250x190x220 cm weight: 250 kg serial no.: M-0514-005-05/05-08 frequency: 50 Hz voltage: 400 V palletising unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cito System for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rundholzsortier- und Transportwagen BAJLER ZEMBROD SPURBREITE 3m

Banding machine for folding boxes incl. inline feeding system, stacking device, PLC ELAU, type PacDrive Max-4 etc.

Aleanderwerk KN 20 Zwilling Combination machine consisting of bowl cutter and meat grinder Bowl cutter with 20 l bowl volume Knife head with 3 pcs. included Two cutting speeds: 1. 1500 RPM. - 2. 3000 RPM. Stainless steel bowl Including thermometer for temperature indication Meat grinder 82 mm diameter Two grinding speeds Including brand new cutting set Machine sits on a movable frame with 4 rolls

Product number: 2847 Type: TSRR-200SLD Serial number: 303 NL 2017 Year of construction: 2017 Content: 200 litres Heating: steam, 111 kg/h Mixing: 10 - 60 RPM Power: 3 x 400V, 50Hz, 2.2kW Dimensions: 1550 x 1250 x 1700 mm Weight: 440 kg With mixer / agitator

bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 220 mm : 425 mm table surface area: 700 x 210 mm connected load frequency: V max. distance between table and spindle-nose: 470 mm total power requirement: 1,5 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,2 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used production line for paints and varnishes from Diamac. The line includes: -2 x dissolver stationary 50hp, 1500 litres: diamac - industrial tyntometer: diamac (installation brand new, never used) - stationary mixer diamac 30hp inverter - stationary mixer slow speed diamac 10hp - column disolver diamac 15hp inverter - laboratory disolver diamac 2hp inverter - immea semi-automatic controller/ filler model dpc/5/30 - dust filter, pneumatic brand: wam - volumetric pumps for resin transport/dosing brand: pedrollo additional: - documentation, operating instructions, "ce" safety certificates, etc.

BS Series Pretzel & Bread Slicer Model: BS 26 Tabletop machine variable cutting height up to 55 mm for cutting open or cutting in Stainless steel Connection 220 V Dimensions: 490 x 300 x 245 mm, WxDxH Used machine cleaned More slicers in stock!

Bread Slicer Circular Knife Machine Wabäma Model: R 400 The all-rounder among bread slicers max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular knife machine with bread halving Counter and preset for number of discs with integrated drawer Circular knife made of high-quality Teflon special coating Machine mobile with brake Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 720 x 1110 mm, WxDxH Cleaning machine with 6 months warranty Many more TOP bread slicers in stock!

180° curved conveyor Krones Multico S and 90° curved conveyor Krones Machine 180° and 90° curve conveyors suitable for different tray/container formats. 180° modular belt 525 mm, distance between input/output 1700 mm 90° modular belt 525 mm, R1000.

We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands

Bowl cutter Kilia 50l 3000 RS Express 50 liter stainless steel bowl Operation via push button 2 knife speeds 2 bowl speeds Mixing speed forwards and backwards 6 pcs. knife head 3 pcs. knife head Rated power 15 kW, total rated current 33 A Operating voltage 380 V / 50 Hz Weight approx. 950 kg