127,590 used machines on RESALE, but how to find them? Machine Search
FERAG wire stitching machine Year: 2008 Binding block format V1 Gross: min 152 × 217 – max315 × 340 Net: min 148 × 210 – max 300 × 332 Insert for feeder station Min 110 × 95 – max 315 × 340 Gluing of sheets only – no blocks Net format: min 55 × 85 – max 280 × 200 min 85 × 55 Advertising sleeves and folded inserts with one fold must be tested. Number of insert feeders 8 Number of glued-sheet feeders 1 Maximum block thickness 5 mm Insert pre-fold 8 to 12 mm – back pre-fold only Insert without pre-fold Possible, but not across the entire format range Double production Cutting in the machine not allowed Trimming Head and foot trimming 3.5 – 50 mm Side trimming 3.5 – 50 mm Landscape format cannot be trimmed on the three-knife trimmer, which differs structurally from saddle stitchers and wire stitchers. Staples Number of standard stitching sta ...
Hello, for sale is a very good used wire EDM machine of the brand Fanuc Robocut Alpha C400iC. The EDM machine has only 3288 operating hours and is from the year 12/2021. The Fanuc is still energized and is available at short notice. Prior sale and errors excepted.
26 Coils EDM-Cut Brass Blank Ø 0.25mm 500 N/mm² DIN 160 8 kg/spool
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44803-65
Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-44803-255
Wire Bending Machine WAFIOS AG BM 30 – 2017 | Very Good Condition For sale: high-class CNC wire bending machine WAFIOS BM 30, year of manufacture 2017. The machine is in very good technical condition, with low operating hours – ready for operation without additional investment. Key parameters: Wire diameter range: 2.0 – 6.5 mm Working range: 600 N/mm²: 2.0 – 6.5 mm 1,200 N/mm²: 2.0 – 4.5 mm 1,900 N/mm²: 2.0 – 4.0 mm Optional: capability to process wire from 1.5 mm Maximum feed speed: 120 m/min Bending torque: approx. 250 Nm Number of CNC axes: 7 Equipment: Decoiler Safety fencing Drive rollers (3 pairs of feed rollers) Functionality and capabilities: Unlimited rotation angle of mandrel axis and bending shaft Precise bending head operation (vertical and lateral movements) Possibility to extend functionality (e.g. CNC support plate) High pro ...
line wire diameter 1,6-2,8 mm point wire diamter 1,4-2,5 mm output - meter/min 25-38
inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12
straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m
crimped mesh assembly loom, autom. weft wire fee wire diameter - automatic 1,0-6,0 mm mesh width - automatic 10-60 mm working width 2.000 mm wefts per min. 30
diameter range 1,8-3,4 mm nail length 13-80 mm output - pieces/min 550
diameter range 1,8-2,5 mm nail length 32-57 mm output - pieces/min 2000
diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700
diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800
diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350
diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950
diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370
wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370
wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420
diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550
diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520
diameter range 2,1-3,1mm nail length 32-51mm output - pieces/min 1600
diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200
wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430
diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550
with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350
diameter range 1,0-2,2 mm nail length 10-50 mm output - pieces/min 700
diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800
Wire Rolling Machine ORT Italia - RT 10 Brand: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year of construction: 1998 Maximum pressure: 10T Maximum workpiece: 30Ø Minimum workpiece: 2Ø Minimum wire length: 2mm Maximum wire length: 65mm Pitch/lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Auction-ID: A1-44905-163
Conveyor Belt/Wire Webbing/Bar Webbing Belt with FU, Control Cabinet - Length 1,000 mm - Width 600 mm -------------------------- Conveyor belt / wire belt / mesh belt with FC, control cabinet - Length: 1,000 mm - Width: 600 mm
Conveyor belt/wire webbing/rod webbing - Length: approx. 3,700 mm - Width: 600 mm --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: approx. 3,700 mm - Width: 600 mm
Conveyor belt/wire webbing/rod webbing - Length: 3,250 mm - Width: 600 mm - Pitch: 12.7 mm - With geared motor --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: 3,250 mm - Width: 600 mm - Partition: 12.7 mm - With gear motor
Conveyor belt/wire webbing/rod mesh webbing belt with center drive - Length: approx. 2,500 mm - Working width: 300 mm - with mid-drive ------------------------------- Conveyor belt / wire belt / mesh belt with center drive - Length: approx. 2,500 mm - Working Width: 300 mm - With center drive
Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg
indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg
Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg
Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg
Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg
Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc.
Indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Manufacturer: Verlinde, control for electric wire rope hoist type VT202116 -Control voltage: 48 V -Frequency converter: Variator VT -Individual components: see photos -Delivery/Price: complete -Dimensions: 630/310/440 mm -Weight: 30 kg
Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece
Drawing line Composed of Lifting platform INDEVA LIFTRONIC Jib Crane 40 kg with Scale Reel handling unit Drawing machine SAMPSISTEMI MT 106 6A year 2012 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Manual gearbox only, ideal for DIN 250, DIN 355 and P15, can also be used with DIN 160, DIN200, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-641
Transport dimensions approx. 1800x1500x1500 mm Auction-ID: A7-45347-648
Metal cored wire, 1.2mm, 15kg. Lot consists of 15 boxes. Auction-ID: A1-41275-115
Metal cored wire, 1.2mm, 15kg. Lot consists of 15 boxes. Auction-ID: A1-41275-113
Metal cored wire, 1.2mm, 15kg. Lot consists of 20 boxes. Auction-ID: A1-41275-116
Drawing line Composed of Lifting platform with scale Reel handling unit SAMPSISTEMI TE/25-A drawing machine year 2003 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-638
Metal cored wire, 1.2mm, 15kg. Lot consists of 15 boxes. Auction-ID: A1-41275-114
Drawing line Composed of Lifting platform with scale SAMPSISTEMI BD 250 A reel handling unit Drawing machine SAMPSISTEMI RC 150 / MT 160 6A year 2017 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-649
Metal cored wire, 1.2mm, 15kg. Lot consists of 15 boxes. Auction-ID: A1-41275-112
maximum number of results exceeded
please refine your search
1.390 € 
