wind used for sale

Kohmann F1050-2 – Window patching machine Year: 1994 Blank width: 80–1,050 mm; blank length: 100–1,020 mm Window length: 50–720 mm; window width: 30–840 mm Film thickness: 0.03–0.30 mm; board thickness: 0.4–6.0 mm Output range: 175–1,050 pieces/min, depending on format and operating mode Single- and double-lane operation for applying film windows to carton blanks. Maximum output of 1,050 pieces/min applies to double-lane operation with triple utilisation and blank lengths below 320 mm. Reference: PP-59868 Further information on request.

NUMBER 144X2 SPINDELS HEBERLEIN JET ROTARY CREEL DOUBLE DENSITY

40 POSITIONS GASSING/SINGEING GSP PASSED YARN THROUGH A CONTROLED GAS FLAME TO REMOVE PROTRUDING HAIRS AND SMOOTH THE STRAND

Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment.

NUMBER 16 POSITIONS FOR ALLUMINIUM SPOOLS TYPE PIRN WINTER

NUMBER 16 POSITIONS FOR ALLUMINIUM SPOOLS TYPE PIRN WINTER

The TC STE 1600 is a fully automatic, industrial packaging machine (horizontal wrapper) manufactured by the Italian company GG Macchine. The device is used for horizontal wrapping of products with stretch film in an automatic cycle.

AIR COVERING MACHINE NUMBER 12 POSITIONS HEBERLEIN JET LATERAL CREEL

NUMBER 18 POSITIONS EACH MACHINE HEBERLEIN JET COMPUTER CONTROL

Year: 2002 New-exhibition machine, never used in production. - flash limit: 0,8 – 2 mm - angle range 30-180 degrees - maximum welding height: 200 mm - maximum welding width: 215 mm (at 90°)

NUMBER 25 POSITIONS FINAL BOBIN 290MM

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

Used press / assembly machine for woodworking, suitable for assembling and pressing wooden windows, frames, skeletons, panels and glued wood parts. Suitable for joinery workshops and furniture or window production. Brand, exact model and technical specifications (press force, working dimensions, electrical connection, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-36

Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data Manufacturer: Haloila Model: Octopus Compact, inline version Year of manufacture: 2016 Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) Designed output: 3 ...

5-blade wind generator for 5 kW per day (500Wp), complete with controller. Never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-50796-230

5-blade wind generator for 5 kW per day (500Wp), complete with controller. Never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-50796-319

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length s ...

Window machining center Dimensions of workpieces: Workpiece length: 270 x 3000 mm Workpiece thickness: 30 - 85 mm Workpiece width: 180 mm Equipment: Electric length stop Crosscut saw, diameter 400 mm, motor 3 kW Tenoning spindle, diameter 50 mm, useful shaft length 600 mm, motor 7.5 kW 3 x profile shaft, diameter 50 mm, length 600 mm, motor 7.5 kW Glazing bead saw, diameter 200 mm, effective shaft length 20 mm, motor 2.2 kW Feed device 1.5 kW, roller diameter 120 mm Oertli tools included profile 68, 78, 82

The machine is in good technical condition; testing is possible by prior arrangement. Four winding machines from the German company RUFF GmbH are available for sale.

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with NC-controlled spindles ----------------------------------------- The machine was in daily operation until September 2026, at which point it was professionally dismantled and placed into storage at our facility. Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) Pos. 1: Cross-cut saw ---------------------------- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut line > NC-controlled length stop, mounted on the tenoning table, positioning of the cross-cut saw is integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting ...

Vintage : 2022 Appellation : Alsace Region : Alsace Quantity : 6 bottles Capacity : 75 cl Classification : Riesling Clos Windsbuhl 2022 - Domaine Zind-Humbrecht - Alsace - Alsace Packaging : case of origin Auction-ID: A1-51167-346

Number of spindles: 4 St. Number of tools: variabel St. Spindle diameter: 50 mm Spindle length: 320,320,320,160 mm WEINIG UNIVAR 12 NC AUTOMATIC PROFILING AND MILLING MACHINE ----------------------------------------- Machine can still be seen in operation! Includes mechanization/handling equipment. For milling the perimeter of windows, doors, and similar items with non-uniform (varying) profiles. For profiling individual components. PROCESSING UNITS ----------------------------------------- 1. Profiling Spindle ----------------------------------------- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes Synchronous feed device with automatic plunge function 2. Profiling Spindle ----------------------------------------- Motor  ...

- Only used 1 x; - With side door and 2 x side window openings - Payload weight: approx. 26,400 KG - Curb weight: approx. 4,080 KG - Total weight: approx. 30,480 KG - Condition see photos; - Viewing recommended; - High Cube; - Pick-up location: 24601 Stolpe, Germany Auction-ID: A1-51200-23

Used Froitzheim&Rudert PR150 Coil/Wire Winding Machine Power: 220 volts Auction-ID: A1-50936-133

5-blade wind generator for 5 kW per day (500Wp), complete with controller, never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-50798-313

5-blade wind generator for 5 kW per day (500Wp), complete with controller, never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-50798-171

5-blade wind generator for 5 kW per day (500Wp), complete with controller. Never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-50799-319

5-blade wind generator for 5 kW per day (500Wp), complete with controller. Never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-50799-230

5-blade wind generator for 5 kW per day (500Wp), complete with controller. Never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-50798-29

This is an unused dormer window completely plastic equipped with double glazing 3x turn / tilt windows roof and walls are insulated needs to be cleaned is covered in dust outer dimension length 441cm (without gutter) depth 135cm (measured at the top) height 165 color presumably canal green Auction-ID: A1-47450-251

Lot 2205 – B&R PROVIT IPC 5000 industrial PC – Celeron 366 MHz – Windows NT – working Specifications: Brand: B&R Series: PROVIT IPC 5000 Type: Industrial PC / Machine Control System unit: 5C5601.11 System: Intel 82440BX Processor: Intel Celeron 366 MHz Processor socket: Socket 370 RAM: 64 MB SDRAM PC100 Hard disk: 6 GB Supply voltage: 115/230 V AC Mains frequency: 50/60 Hz Power supply: 150 W Operating System: Microsoft Windows NT Dimensions: approx. 270 x 200 x 100 mm Weight: approx. 4 kg CE marking available Features: VGA Graphics Connector Ethernet network connection RS232 serial connectors RS232/422 interface Parallel LPT interface PS/2 keyboard and mouse connection USB connection External VGA monitor connection Floppy interface PCI/ISA expansion options Internal fan cooling Various connection cables and connectors as shown Pa ...

Code: 0506 Brand: SAOMAD Model: UT 4 - CE Standard 4 Spindles tenoning machine for door and window frames, doors and windows - CE Standard Safety guards CE Standard Cutter heads lenght mm 100 Max distance between 2 heads mm 0/68 Horizontal displacement of upper head mm 30 Working table width mm 420 Table and square inclination +- 45 degrees Disk saw diameter mm 250 Diameter of counter profile disk max mm 300 Router shaft diameter mm 35 - Motor Hp 4 Cutter heads and disk saw motor Hp 3 Pneumatic workpiece clamping Heads suction mouth diameter mm 120 Router suction mouth diameter mm 120 Disk saw suction mouth diameter mm 120 Overall dimensions mm 1700 x 1150 x 1400 h Weight kg 500

Tenoning spindle: 1 St. Number of milling agregates: 1 St. Spindle diameter: 40 mm Small-scale window manufacturing consisting of: The machines remained in working order at our customers site until they were dismantled -------------------------------------------------- 1) Haberkorn FZS1 slotting machine. 2) Okoma SF3F table milling machine with glazing bead saw. 3) Oertli tooling for the Haberkorn and Okoma machines. 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. (Hardware can be converted for an additional charge upon request!) -------------------------------------------------- Technical Manufacturers Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: t ...

Tenoning spindle: 1 0 Number of milling agregates: 2 St. Spindle diameter: 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer, still connected to the mains and extraction system The machines are in excellent condition and can still be demonstrated ------------------------------------------------------- Manufacturers Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine --------------------------------- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system, Positive-guided saw guard for accident prevention Tenoni ...

number of aggregates: 2 St. working width: 2000-3500 mm work height max.: 2450-3200 mm Wintech M9Cb Sealing Machine Automatic sealing system for wooden windows and doors with 2 processing units. For a detailed description, see the PDF document. ----------------------------------- Manufacturer’s technical description: M9Cb robotic sealing system The machine comprises a robust structure made from aluminium profiles, fitted with motorised conveyor belts on which the window units are transported. The silicone is distributed evenly into the joint by means of two automatically controlled nozzles. The electronic control system, which is in constant communication with the sensor, determines the movement of the guns and the operating parameters. Technical data: Standard Optional Max. window width 2000 mm 3500 mm Max. window height 2450 mm 3200 mm  ...

Pair of manual roller unwinders/winders for reels minimum maximum wheel distance 35/60 cm wheel diameter 20 cm Auction-ID: A7-51362-16

Lot consisting of 2 Würth temporary anchoring devices for door/window openings, art. 0899032950. Indicated conformity: EN 795 B CE Marking 0279 Adjustable metal structure Central anchor point Complete with ropes and components present as shown in the photographs. The device is designed to be installed transversely in an opening and create a temporary anchor point for fall arrest systems. The official Würth article manual also confirms its use in the door or window compartment. Auction-ID: A7-51362-40

Coils unwinder for electric cables with 9 wheeled reels Auction-ID: A7-51362-21

Auction-ID: A1-51285-256

Elevator for capsule, cap or others The product is sent into the supply pipe by a power-adjustable blower system. The supply hose can be rotated 180° to supply several machines. The hose can be modified on request. Hopper bottom conveyor length 500 mm and width 300 mm Loading hopper dimensions: 1800 x 500 x 750 mm Hopper volume: 400 liters Dimensions without the supply hose: 2.30 x 0.60 x 2.20 m Max flow rate: 3000/min maximum depending on the nature of the product Auction-ID: A1-51318-280

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Unicontrol 11 NC window production system with an extensive set of tooling ----------------------------------------- INCLUDES: - Weinig Univar 6 rebating/profiling machine - Tooling for both the Unicontrol 11 and Univar 6 The machines can be viewed in operation until the end of calendar week 46, 2026. Dismantling and loading must take place during calendar week 47, 2026. (Note: If the buyer is unable to collect the equipment during week 47, temporary storage at our facility can be arranged.) OPTIONAL (for an additional charge): Professional dismantling and loading of the machines onto the customers trucks: 4,500.00 EUR Manufacturers technical specifications: ----------------------------------------- Item 1: Weinig Unicontrol 11 window production system (built 2007) --------- ...

Battery Capacity: 10.4Ah 48V Range: 50 - 70 km Frame: 20'' Alu Net/max weight: 30kg / 120kg Max speed: 25 km/h Gear: 7 speed Motor power: 250W Brake Type: Disc Brake Auction-ID: A3-46103-20138

Battery Capacity: 10.4Ah 48V Range: 50 - 70 km Frame: 20'' Alu Net/max weight: 30kg / 120kg Max speed: 25 km/h Gear: 7 speed Motor power: 250W Brake Type: Disc Brake Auction-ID: A3-46103-20137

Ø 25-90 mm, v= 20 m/min Drums max. 3200x1600 mm, motorized lifting and lowering, pressure device, light barrier

ø 20-75 mm, v= 15 m/min Core diameter 600-1800 mm; Outer collar diameter max. 2700 mm; winding width 150–500 mm, pressing device

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 For sale on behalf of a customer, to be collected from site Machine can be viewed whilst still in operation Includes tools IV 77, IV 68, see PDF attachments ----------------------------------------- Technical Data Summary (please enquire about any additional accessories that may be included) Item 1: Cross-cut saw ---------------------------- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment beam for identifying the cut section > NC length stop, mounted on slotted table, included Positioning of the crosscut saw integrated into the control system. > Length 3,500 mm Item 2: Tenoning and slotting spindle ---------------------------- > N ...

2 grey metal doors complete with matching metal frames, suitable for industrial, commercial, workshop or technical-room applications. Visible details: Quantity: 2 door sets Construction: metal door leaf with metal perimeter frame Colour: grey Approx. overall dimensions per set: 100 cm wide × 213 cm high Hinged construction Approx. 3 heavy-duty hinges per door Lock/key openings present Frames included Solid, non-glazed door leaves Auction-ID: A1-51282-66

Overview This Tempo-Pack SATURN is a rotary stretch wrapper for pallet loads, built in 2006 and supplied as a complete end-of-line system: infeed roller conveyors, a top-sheet dispenser, the wrapping station and outfeed conveyors with a 90° turn in an L-shaped layout. It was designed for cartons on Euro and half pallets at an output of 60 pallets per hour. The film carriage rotates around the stationary pallet, so the load is not turned during wrapping. Technical data Manufacturer: Tempo-Pack Model: SATURN Year of manufacture: 2006 Output: 60 pallets per hour Product: cartons on pallets Pallet formats: 1,200 x 800 mm (Euro pallet), 800 x 600 mm (half pallet) Maximum load footprint: 1,300 x 1,100 mm Maximum load height including pallet: 1,800 mm Maximum load weight: 1,500 kg Conveyor height: 150 mm Stretch film height: 500 mm Top-sheet film width: 1,400 mm Power supply: 3 x 400/230 V, 50 ...