british flag
Resale Logo

wind used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck Betriebsausrüster für Versorgungstechnik GmbH  http://www.hauck-wue.de 
banner logo
start page > keywords wind > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
126374046 2414

VW Crafter 35 for sale


First registration: 07 / 2009 Mileage: 275.751 km HU / AU: 06 / 2019 Pollutant group EURO EEV AddBlue (between Euro 5 and Euro 6) green sticker Checkbook maintained new Turbo at 246.208 km of new timing belt at 2 ...

 
First registration: 07 / 2009
Mileage: 275.751 km
HU / AU: 06 / 2019
Pollutant group EURO EEV AddBlue (between Euro 5 and Euro 6)
green sticker

Checkbook maintained
new Turbo at 246.208 km of new timing belt at 246.208 km
new water pump at 246.208 km

2.5 l TDI - motor
Motor power 100 kW / 136 HP
6 - speed manual transmission

KoffermaÃ?e L x W x H: 4.370 x 2,010 x 2.110 mm
Loading Board wall 750 kg
Max. Total weight: 3500 kg
Empty weight: 2.585 kg payload: 915 kg

Air conditioning
Electric Windows
3 - seater
Power steering
ZV with key remote control
Driver's airbag
ABS, ASR radio / CD player

Tyres condition approx 50-60%
19% VAT from site immediate price 73450 Neresheim
Mistakes and intermediate sale is reserved
 
9,900 €  
    request
126403034 1009

CLAAS Scorpion 7040 Varip. for sale
Crawler excavators


; Accessories: Allrad, Kabine, Diesel, Teleskoparm (Bautechnikeinsatz), Geschwindigkeit:40, Hubhöhe:7.1; Maximum lift capacity [kg]: 4400
used machine
 
; Accessories: Allrad, Kabine, Diesel, Teleskoparm (Bautechnikeinsatz), Geschwindigkeit:40, Hubhöhe:7.1; Maximum lift capacity [kg]: 4400
2009
38,800 €  
  DE   request
126360054 1403

A1 PREFAB STEEL BUILDINGS Mono pitch Workshop facility for sale
Prefabricated Steel Hall with overhead cranes


This clear span, mono pitch steel hall was built in 2014 as a temporary workshop on a construction site and has recently been dismantled professionally and stored for re-use. In its second life cycle, this very Steel Bui ...
used machine
 
This clear span, mono pitch steel hall was built in 2014 as a temporary workshop on a construction site and has recently been dismantled professionally and stored for re-use. In its second life cycle, this very Steel Building could serve as a workshop for construction machinery, boat yard factory, production hall, etc.

STRUCTURAL STEEL WORK:
the mono pitch steel frames are made of hot-dip galvanized steel profiles of S355J2 steel grade.
The roof substructure consists of load bearing punched steel panels.
The uprights were bolted onto foundations. The crane rail carrier are coated 60my.

DIMENSIONS according to drawings:
Floor surface area: approx. 463, 6 m² built area;
Hall length: approx. 26.02 m outside wall cladding.;
Structural Length: approx. 25.50 meters c2c of end frames.
Bay width: approx. 2.55 m MM uprights;
Hall width: approx. 17.82 m outside wall cladding.;
Frame width: approx. 17.68 m outside steel frame;
System width: approx. 16.38 c2c of steel frame;
Clear height: approx 12.00 m under steel frame;
K-hook height: approx. 10.00 m bottom of crane hook;
Eaves height: approx. 13.19 m top of roofing.
Frame height: approx. 12.96m top steel beams;
Ridge height: approx. 14.20 m top of roofing.
Frame height: approx. 13.88m top of steel frame;

CLIMATIC LOAD ASSUMTIONS:
The structure was designed for a snow load of 12.50 kN/m² and a Wind load of 0,75 kN/m²;

ROOFING:
double-skin roof comprising of steel profile TR150/280/1.25 RAL9002 with Akkustiklochung - VB 840 mm;
and outer shell roof profile TR85/280/0.75 RAL9007 25my - VB 840 mm;

WALL CLADDING:
KINGSPAN PU Panel KS1000 AW 080 AWP outside RAL9007, PES 25my - inside RAL9002 you outside and inside profile mini box 25 mm, stroke width 1000 mm;
Translucent panels KINGSPAN KS1000 wall-lite 80 mm, width 1000 mm;
Some composite sandwich wall panels are missing because a containers where annexed to the building.

FACILITIES:
2 STK. ABUS two carrier overhead cranes with wireless remote control, crane classification H2/B3;
Type ZLK, capacity 12500 + 12500 kg;
4 STK. ABUS trolleys per 12.5 tonnes, hoist GM 3000.12500 H.201.41.10000.4.DA 160.20.
2 STK. roller shutter doors (approx. 7,0 x 7.5 m);
2 PCs. pedestrian doors (approx. 2.12 x 1.15 m);

DOCUMENTATION:
Construction documents (structural calculations and drawings from 2014) are available.

STORAGE LOCATION:
Austria. Visit by appointment.

AVAILABILITY:
The Hall was dismantled/ stored in may 2018 and can be collected after payment of the purchase price.

NET PRICE:
upon written request with full company / contact information of the buyer.
2014
Price  
    request
126401716 205

BIESSE SKIPPER 100 for sale
CNC Machining Centre


Weight approx.: 2700 kgDimensions (l x w x h) approx.: 7300 x 5000 x 2400 mmDescription: Serial number 14223, The panels are moved on an air floatation table respect to the tools which are fixed, No waste of preparation  ...
used machine
 
Weight approx.: 2700 kg
Dimensions (l x w x h) approx.: 7300 x 5000 x 2400 mm
Description: Serial number 14223, The panels are moved on an air floatation table respect to the tools which are fixed, No waste of preparation time even manufacturing 1-piece batches, The machine can work the panel simultaneously from above or bellow and can produce 2 identical or mirrored panels per cycle, Total installed power approx. 20 kw, Maximum panel dimensions 3000 x 1000 x 60 mm, Minimum panel dimensions 90 x 70 x 8 mm, Same equipment from above and bellow: 1 + 1 vertical milling unit with 3.50 kw working from 7000 rpm up to 18000 rpm, 1 + 1 Saw unit working to 4500 rpm,Vertical drilling spindles: 29 + 29, Horizontal drilling spindles X-axis: 4 + 4, Horizontal drilling spindles Y-axis: 4 + 4, Software Windows/BiesseWorks, The tools that appears in the photos are included
2007
used machinery auction RESALE 26,000 €  
  ES   request
126359853 832

STAHL STAHL for sale
Automatic folding machines


Window fold unit for STAH folders. Width 60 cm.
used machine
 
Window fold unit for STAH folders. Width 60 cm.
 
Price  
  SI   request
126388221 207

SCM METHOD for sale
Windows Production Machine


Weight approx.: 4000 kgDimensions (l x w x h) approx.: 8000 x 4000 x 1800 mmDescription: Working length 200 - 2800 mm Max working height 140 mm Tenoning speed 4 - 16 m / min Profiling speed 2.5 - 12 m / min COMPOSITION:  ...
used machine
 
Weight approx.: 4000 kg
Dimensions (l x w x h) approx.: 8000 x 4000 x 1800 mm
Description:

Working length 200 - 2800 mm

Max working height 140 mm

Tenoning speed 4 - 16 m / min

Profiling speed 2.5 - 12 m / min

COMPOSITION:

Sawing unit, blade diameter 400 mm, power 5.5 Hp

Tenoning unit, shaft diameter 50 mm, shaft length 620 mm, power 10 HP

1st profiling unit, shaft diameter 50 mm, shaft length 320 mm, power 7.5 HP

2nd profiling unit, shaft diameter 50 mm, shaft length 320 mm, power 7.5 HP

Glazing bead cutting-off group, shaft diameter 30 mm, shaft length 30 mm, blade diameter 220 mm, power 3 HP

Piece return system

2000
used machinery auction RESALE 8,000 €  
  IT   request
126351202 816  

BHS GALLUS BHS Gallus 10 UV colours for sale


BHS Gallus 10 UV colours used flexopress 1300 mm automatic unwinder & rewinder We invite you to contact us if you have used machines for sale or if you are looking for new or used machines

 
BHS Gallus 10 UV colours used flexopress 1300 mm
automatic unwinder & rewinder

We invite you to contact us if you have used machines for sale or if you are looking for new or used machines
 
Price  
    request
126385401 106

EXNER EX 40 (UVV) for sale
Double-Column Presse


pressure:0040 tdistance between columns:500 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:480 x 400 mmhole in the table:50 mmtable height over floor:950 mmside window:150 mmram ...
used machine
 
pressure:0040 t
distance between columns:500 mm
stroke:150 mm
distance table/ram, max. stroke up, adjustment up:300 mm
table surface area:480 x 400 mm
hole in the table:50 mm
table height over floor:950 mm
side window:150 mm
ram surface:150 mm
speed down:480 mm/s
speed up:480 mm/s
working speed:20 mm/s
oil volume:160 l
power requirement:7,5 kW
weight:2,6 t
dimensions (WxDxH):1,1 x 1,4 x 2,4 m
list price: in running function in our warehouse:
German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
light guard:Sick
cutting impact cushioning:
depth stop:mechanical
two-hand and foot operation:
foundation pit:not necessary

1992
Price  
    request
126351201 816  

GALLUS Gallus EM280 for sale


Gallus EM 280, 2001 Unwind stand Corona Arcotec, rail cleaner Teknek 10 which 10 UV drying 10 hot-air drying 10 cooling roll Stamping work station for 2 cutting devices with 1 punching device, 2 free position Video ...
used machine
 
Gallus EM 280, 2001
Unwind stand
Corona Arcotec, rail cleaner Teknek
10 which 10 UV drying
10 hot-air drying 10 cooling roll
Stamping work station for 2 cutting devices with 1 punching device, 2 free position
Video Kontrol BST Euroscope
Transport trolley
Sheet delivery
Crushing knife Kit
Cooling machine
Cliché mounting device
Flexo wash automatically waschemaschine 138 pressure cylinder, 16 magnetic cylinder, 25 Anilox
2001
Price  
    request
126373666 1200

LAGERWEY 15/75 kW for sale
Lagerwey 15/75 kW wind farm


1980
20,000 EU?  
  PL   request
126344463 816

GALLUS Gallus EMS340 for sale


Unwind lift unit with pneumatical Corona, Web cleaning 10 hybrid printing unit 10 UV drying GEW, chilling cylinder, chilling machine 2 screen printing unit, process-exchange trolley for screen inking unit Screen prin ...
used machine
 
Unwind lift unit with pneumatical
Corona, Web cleaning
10 hybrid printing unit 10 UV drying GEW, chilling cylinder, chilling machine
2 screen printing unit, process-exchange trolley for screen inking unit
Screen printing periphery
Cold foil or lamination
Hot foil stamping
Diecut unit Rotometrics HydraJack
Matrix rewind Web video BST POWERScope 300
Automatic register control Sensotec
Rail system
Web turn bar
Delam / relam
Rewind unit
50 aluminium printing sleeves, 5 magnetic cylinder, 16 Anilox
2010
Price  
    request
126359716 109

LUNA MBC8835 for sale
Metal bundling machine Luna MBC8835


The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings sl ...
used machine
 
The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. Compensation of sagging upper roller is realized by longitudinal beam. All rollers are driven. The spinning process is carried out without slip to prevent scratching of the workpiece. CNC - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. All rolls are chrome-plated and polished. All axes are programmable. The machine has the possibility of rolling difficult elliptical shapes.
2010
27,000 EU?  
  PL   request
126344410 107

DFK for sale
Longitudinal Cutting Lines


strip width 600 - 1.600 mm strip thickness 1,20-6,00 mm tensile strength max. 55 kg / mm2 yield strength max. 36 kg / mm² coil inside diameter 475 - 525 mm with top jaws 560-790 mm Ccoil outside diameter 1.200 - 2 ...
used machine
 
strip width 600 - 1.600 mm
strip thickness 1,20-6,00 mm
tensile strength max. 55 kg / mm2
yield strength max. 36 kg / mm²
coil inside diameter 475 - 525 mm
with top jaws 560-790 mm
Ccoil outside diameter 1.200 - 2.000 mm
coil weight 24,0 t
speed 0-100 m / min.
working direction left - right
dimensions (l x w) approx. 28 x 8,5 m
the line consists of:
coil lifting table
coil weight max. 24,0 t
coil outside diameter max. 2.000 mm
pay-off reel with press roll
coil weight max. 24,0 t
coil diameter max. 1.600 mm
coil opener with bending roll
entry edge control
pinch rolls
crop shear
side guides
slitting shear and changing unit
knife diameter max. 430 mm
knives shaft diameter 250 mm
scrap winder
loopint pit with conveying car
electric
hydraulic
pneumatic
number of cuts in material quality ST 37:

band thickness number of cuts speed m/min.
1.20 30 100
1.50 24 100
2.50 22 100
3.00 18 90
4.00 14 80
5.00 10 70
6.00 8 60
2004
Price  
    request
126352493 106

HYDRAP HPDZB 315 (UVV) for sale
Double-Column Presse


pressure:0315 tdistance between columns:1700 mmstroke:750 mmdistance table/ram, max. stroke up, adjustment up:1250 mmtable surface area:1600 x 1300 mmpressure of drawing cushion in table:125 tstroke of drawing cushion in ...
used machine
 
pressure:0315 t
distance between columns:1700 mm
stroke:750 mm
distance table/ram, max. stroke up, adjustment up:1250 mm
table surface area:1600 x 1300 mm
pressure of drawing cushion in table:125 t
stroke of drawing cushion in table:350 mm
die cushion area:1000 x 900 mm
table height over floor:750 mm
side window:1100 mm
ram surface:1600 x 1300 mm
speed down:400 mm/s
speed up:400 mm/s
working speed:12 - 44 mm/s
oil volume:2500 l
draw back pressure:48 t
total connected load:92,0 kW
power requirement:30,0 + 30,0 kW
weight:43,5 t
dimensions (WxDxH):3,6 x 3,1 x 6,0 m
height over floor:4,9 m
list price: in running function in our warehouse:
German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
drawing cushion in table:hydraulic
conrollable dependant on pressure/time and way:
cutting impact cushioning:
ram interlocking:
two-hand operation:

1987
Price  
    request
126343924 702

KEMPER SPIRALKNETMASCHINE SP 75 L for sale


Kemper SP 75 L spiral kneading machine, mobile, 380 volts, forward and rewind, watches and switch work.
used machine
 
Kemper SP 75 L spiral kneading machine, mobile, 380 volts, forward and rewind, watches and switch work.
 
Price  
    request
126339320 102

DMT-KERN CD 650 x 1500 for sale
Lathe - cycle-controlled


turning diameter: 650 mmturning length: 1500 mmcontrol: Manual Plus 4110 swing diameter over bed slide: 420 mmswing over bed: 650 mmcentre distance: 1500 mmspindle nose size according to DIN 55026: Gr. 18 spindle diamete ...
used machine
 
turning diameter: 650 mm
turning length: 1500 mm
control: Manual Plus 4110
swing diameter over bed slide: 420 mm
swing over bed: 650 mm
centre distance: 1500 mm
spindle nose size according to DIN 55026: Gr. 18
spindle diameter in front bearing: 140 mm
spindle bore: 103 mm
longitudinal feed: 0,001 - 2.000 mm/U
cross feed: 0,001 - 1.000 mm/U
rapid traverse (X / Z): 5/10 m/min
turning speed range - spindle: 1 - 2.000 (V-konstant) U/min
Motor output: bei 44% ED 33 kW
tailstock quill taper MT: 5
Quill diameter: 100 mm
quill stroke: 200 mm
threading - metric: mm/U
total power requirement: kW
weight of the machine ca.: 5 t
dimensions of the machine ca.: m
Mechanic: good:
Optical condition: normal and cleaned:
The machine can be viewed under current.:
4208.02 400 V, 50 Hz, color: light gray RAL 7035 / brilliant blue RAL 5007


Machine with CE
Position display and control HEIDENHAIN MANUALplus 4110
- Flat screen TFT 10.4 colored
- V-constant for manual and automatic turning
- Electronic stop turning in manual mode
- Simple cycle input in dialogue with graphic images
- Contour features: Longitudinal, Plan, Kehel, Radii, Chamfers
- contour cycles: cutting and finishing along and plan
                with cones, radii, chamfers
- Drilling cycles with / without dehumidifying
- Center and drill hole / bolt circle cycle for axial and radial
- Undercut cycles DIN 76 and DIN 509 Form E + F
- Special freezes
- Punching
- Thread cylindrical, conical, plane winds with constant or
  variable pitch with proposal for the thread depth
- Thread repair
- Variations within cycles
- ICP interactive contour programming
- Programming according to DIN 66025
- Geometry input absolute or incremental
- Feed input mm / rev or mm / min
- Enter a protection zone in front of the chuck
- Processing time analysis
- Power display for the main engine
- Graphical program simulation (line or cutting track)
  Simulation in use or complete program
- Oriented spindle stop with angle specified in °
- Automatic program sequence
  optional single or subsequent cycles (with door lock)
- Tool storage for 99 tools
- comfortable tool file
- Assignment of Schnittgschwindigleit / speed and feed
- Part program memory 4.5 GB
- Variable program numbering (up to 8 digits)
- Copy program
- Teach in and / or run off the memory
- Program input / output via serial interface V24 / RS232C

C axis
- Drilling and milling cycles and free ICP input
- Main spindle speed 0,001 ° / min - 100 rpm
- Resolution 0,001 °
- pneumatically operated disc brake on the main spindle

Automatic wheel turret
- with 12 tool stations
- with tool drive for 6 stations
- Tool holder system DIN 69880, Ø 40 mm
- built up on the cross slide at the back
- Tool drive via gears and clutch
- Adjustable servo motor for the tool drive
- output speed adjustable, max. 300U / min
- Clamping capacities in St. 60
- Drilling with spiral drill Ø x s 16 x 0.20 mm
- Drilling with carbide solid drill Ø x S 20 x 0.12 mm
- Tapping M 14 x 2 / M 20 x 1.5
- Milling with end mill Ø x t x v 20 mm x 12 mm x 40 mm / min

Extension of electrical connection instructions
- between machine and control cabinet by 5 m

Coolant device
Central lubrication device
Hinge belt chip conveyor
new scrapers
new drive belts
new Heidenhain spindle module
New speedometer in the drive motor
all filters replaced
Oils completely renewed
Transmission
- ZF planetary gears 2 steps
- switched electrically
- mounted outside of the headstock

Machine shoes
Complete documentation (operating instructions, operating instructions,
circuit diagram)
Machine is workshop tested and with electrical test protocol!



This ad was created with MODUL MWS - the software solution of LogoTech.
2002
Price  
    request
126327649 210

PRESSTA EISELE Primus 300 for sale
Towline milling maschines for window production


SN: 8970
used machine
 
SN: 8970
2001
Price  
    request
126339316 109

BONGARD SPV for sale
Coiler


working area: bis ca. 6,5 mmspeed: 0 -4 m/secWeight: 2500 kgVERTICAL SPOOLER(Winder)TYPE: BongardType: SPVYear of construction: 1981Working range: up to approx. 6.5 mm Ø with steel wireCoil weight: up to 1 to.Spool inne ...
used machine
 
working area: bis ca. 6,5 mm
speed: 0 -4 m/sec
Weight: 2500 kg
VERTICAL SPOOLER
(Winder)

TYPE: Bongard
Type: SPV
Year of construction: 1981

Working range: up to approx. 6.5 mm Ø with steel wire
Coil weight: up to 1 to.

Spool inner Ø 520 mm
550 mm with jaws
Coil outside Ø max. 970 mm
Laying width: 385 (max. 400 mm)

spooling speed: stepless from 0 - 4 m / sec

Drive motor: 13 kW, max 3000 rp
Laying engine: 3 kW

direct current motor
constr. Lenze 380 V 50 Hz


complete with control cabinet


















This ad was created with MODUL MWS - the software solution of LogoTech.
1981
Price  
    request
126327639 106

DUNKES HZS 40 for sale
Single Column Presses


Technical data: -maximum pressing force 40 t -maximum piston stroke 218 mm -Height 410 mm -Projection up to mid slide 280 / 370 mm -Table size 650 x 520 mm -Plunger surface 500 x 400 mm -StöÃ?elboaufna ...
used machine
 

Technical data:

-maximum pressing force 40 t
-maximum piston stroke 218 mm
-Height 410 mm
-Projection up to mid slide 280 / 370 mm
-Table size 650 x 520 mm
-Plunger surface 500 x 400 mm
-StöÃ?elboaufnahme DIN 810 50 mm
-Work speed max.bis 226kN 39 mm / s
-Min. working speed 21 mm / s
-Eilabsenkgeschwindigkeit 428 mm / s
-Rear hub speed min. / max. 100 / 420 mm / s
-Table height above floor 820 mm
-Oil quantity approx. 400 ltr
-Drive 400 V / 15 kW
-Space requirement approx. B 1400 x H 3200 X 2200 mm
-Weight approx. 7000 kg
-with: - hydr. PIN voltage
-Control CNC 50 - separate control panel
1994
Price  
    request
126339287 210

WEINIG Unicontrol 12 CNC for sale
Window production centre


Tenoning spindle: 2 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmweight: 11500 kgLoading meters, approx.: 1360 m Machine is currently being checked # 2428 Weinig Unicontrol 12 CNC, with 2 tenoning spindles ...

 
Tenoning spindle: 2 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
weight: 11500 kg
Loading meters, approx.: 1360 m
Machine is currently being checked


# 2428 Weinig Unicontrol 12 CNC, with 2 tenoning spindles and Vario-Table
--------------------------------

Technical Data Summary
--------------------------------
(Possibly additional accessories please inquire)

Total weight: approx. 13000 kg
Slotted part: 5500 kg
Profil part: 5000 kg


Cutting edge saw
--------------------------------
> Cross-cut saw electronically, horizontally infinitely adjustable: NC axis
> Number of tools: 1 pcs.
> Spindle speed: frequency controlled 3000-6000 rpm
> Spindle diameter: 40 mm
> Tool diameter max .: 400 mm
> Motor power: 3 kW
> Laser beam for detecting the saw section:
> Adjustment travel axial: NC axis integrated in the control
> Radial travel range: 150 mm
> Radial clocked to 8 positions for edge rounding from above

Unit for edge rounding from below
--------------------------------
> Axial adjustment together with crosscut saw

CNC controlled length stop
--------------------------------
> Length 4500 mm
> Incl. Positioned crosscut saw integrated into the control


1. Spigot and slotted spindle
--------------------------------
> Number of tools: variable, CNC axis
> Tool clamping length: 640 mm
> Spindle stroke vertical: variable, CNC axis
> Spindle speed: 2925 rpm
> Spindle diameter: 50 mm
> Tool diameter: 380 - 400 mm
> Motor power: 15 kW
> With follow-on counter


2. Spigot and slotted spindle
--------------------------------
> Number of tools: variable, CNC axis
> Tool clamping length: 640 mm
> Spindle stroke vertical: variable, CNC axis
> Spindle speed: 2925 rpm
> Spindle diameter: 50 mm
> Tool diameter: 380 - 400 mm
> Motor power: 15 kW
> With follow-on counter

> VARIOPLUS package
Tapping and slotting table with horizontal CNC axis travel 200 mm


1. Profileing spindle
--------------------------------
> Position: right
> Number of tools: variable, CNC axis
> Tool clamping length: 400 mm with counter bearing
> Spindle stroke vertical: variable, CNC axis
> Spindle stroke horizontal: variable, CNC axis
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tooling circle max .: 232 mm
> Engine power: 11 kW
> Radial adjustment: CNC axis
> Axial adjustment: CNC axis


2. Profileing spindle
--------------------------------
> Position: right
> Number of tools: variable, CNC axis
> Tool clamping length: 400 mm with counter bearing
> Spindle stroke vertical: variable, CNC axis
> Spindle stroke horizontal: variable, CNC axis
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tooling circle max .: 232 mm
> Engine power: 11 kW
> Radial adjustment: CNC axis
> Axial adjustment: CNC axis


Groove tool from above - before the last profile spindle
--------------------------------
> Position: horizontal above
> Spindle speed: 9000 rpm
> Spindle diameter: 40 mm
> Tool clamping length: 40 mm
> Motor power: 3 kW
> Adjustment travel axial: 30 mm
> Radial adjustment: 125 mm
> Radial stroke on 8 positions by pneumatic turret
> Axial stroke on 8 positions by pneumatic turret


Profile spindle - Fitting spindle - at the end of the machine
--------------------------------
> Position: vertical right top
> Tool clamping length: 160 mm
> Spindle speed: 5850 rpm
> Spindle diameter: 40 mm
> Tooling circle max .: 210 mm
> Motor power: 3 kW
> Adjustment travel axial: 115 mm
> Adjustment travel radial: 100 mm
> Radial stroke on 8 positions by pneumatic turret
> Axial stroke on 8 positions by pneumatic turret


Groove tool from below- in the additional stand
--------------------------------
> Position: horizontally down
> Tool clamping length: 125 mm
> Spindle speed: 5850 rpm
> Spindle diameter: 40 mm
> Tooling circle max .: 200 mm
> Motor power: 3 kW
> Adjustment travel axial: 100 mm
> Adjustment travel radial: 100 mm
> Axial and radial adjustment infinitely variable NC axis


Other features
--------------------------------
> Online-capable
> Reverberation device for uneven re-folding
> Double pack
> Return conveyor for 1-man operation: slat conveyor
> Angular window arrangement: swivel angle 75 degrees
> Electronic angle display for inclined windows
> Control: PC Nexus
> NC axis for feed height adjustment
> 1 axially clocked feed roller opposite profile milling units, for production
Of narrow, short parts (e.g., glass-dividing rungs)
> 2 axially clocked feed rollers opposite the profile spindle to 8 positions
By means of a pneumatic turret
> Table top to tool diameter clocked (2 positions)
> Sprout guide consisting of:
Automatically timed guide bar at the stop.
Sprout support strip from above in the area of profile milling unit / fitting
spindle
> Sprout support ledge after the last profiling spindle vertically clocked
> Split pressure plate left for wood widths from 40 to 140 mm
> Automatic central lubrication
> Variot: horizontal CNC axis for slit table with adjustment travel 200 mm

Option:
--------------------------------
Used tools in different systems
(Technical data according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(18)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

BHS GallusBHS Gallus 10 UV colours

BHS Gallus 10 UV colours used flexopress 1300 mm automatic unwinder & rewinder We invite you to contact us if you have used machines for sale or if you are looking for new or used machines

Injection molding machines WindsorHIS 800 D

OVERVIEW: Brand: Windsor Model: HIS 800 D Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1979 Production hours: 65000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 3000 mm Measurements height: 3000 mm Machine weight: 14000 kg INJECTION UNIT: Stroke volume: 1100 cm³ Injection pressure: 1500 bar Screw diameter: 110 mm CLAMPING UNIT: Clamping force: 800 kN MEDIA: Main electronic connection: 380 V

Coextrusion plants ReifenhauserCo-Extrusion Line

Make Reifenhauser Year 1996 Materials PS and PP Max Sheet Width Approx 750 mm Max PS Output 650 kg/hour Thickness Range 0.9 - 2.0 mm Main Vented Extruder RH801-1-100-33V Main Vented Extruder Diameter 100 mm Vented Co-Extruder RH241-1-50-30V Vented Co-Extruder Diameter 50 mm Calendar Rolls Width 900 mm Calendar Roll Diameter 1 x 300 mm / 2 x 500 mm Edge Trim Grinder Rapid 2036-KURF Winder Type Jumbo rolls Winder Roll Diameter 2010 mm Power 3x400V 50Hz All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

SOS Block bottom bag machine Windmöller + HölscherTRIUMPH III A

SOS Block bottom bag machine 2 plies photo cell for preprinted paper 4 colour tail end printer bottom patch and 1 colour tail end printer for bottom patch Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

SOS Block bottom bag machine Windmöller + HölscherTriumph I

SOS block bottom bag machine 1 ply photo cell for preprinted paper 4 colour tail end printer Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

Carrier bag machine, SOS block bottom bag machine Windmöller + HölscherTRIUMPH IIIA, Handle unit 9620

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Barmag POY/FDY Winders BARMAG,GERMANYCWR-6,CWR-4

We can offer you 16 sets of Barmag POY/FDY winders,manufacture year 1998-1999.8 ends,chuck length:1200mm.working condition. We can also offer you 10 sets of Barmag winders for High tenacity yarn,manufacture year: 1999,4 ends,working condition. Serious buyers contact us.

HarrisVS 550

Harris Form Consulta VS-550 4 color Built: 1987 12” x 4 Print cassettes 16” x 3 Print cassettes 24” Archive hole Longlife for double production Length perf. Cross perferation 1 x 24” + 24” magnet cylinder Folder: 6”, 8”, 12” Unwind: 1000 mm Rewind 28” Under power and in production. Can ship worldwide. Please inquire for more photos and technical guidance.

Inline Welex Coex + ILLIG RDM 70K , age 1999 Welex & IlligRDM 70K

4.5" Welex single Main extruder 30D vented. 150 hp DC motor. Hydraulic Screen changer Maag 56/ 56 gear pump 15hp dc Static mixer., Welex ABA feedblock. 2" , 24D Welex side mounted coextruder with 20 kW dc motor. 900 mm wide EDI flex lip sheet die . 1040 mm wide Welex 3 roll Cooling/ polishing stack Highly Polished Chrome Rolls 3 zone pump group 3-Roller Take-off conveyor 2 x Rubber Roll Take-off, with safety covers for the Rolls Intermediate Winder Inline ILLIG RDM 70K, age 1999, with Siemens S5 PLC Controls :- Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Siemens S5 Optimised (PLC) Controls ELAU B1 Touch Pad OPC with VDU Display Auto Lubrication Pump. Inline ILLIG BGR53 Counter/ Stacker with Siemens S5 PLC, age 1999 Inline Grinder

Inline Welex Coextruder + ILLIG RDM 70K Welex & IlligWELEX - ILLIG RDM70K

Inline Welex Coextrusion Line for PP/ PS with Inline ILLIG RDM 70K, age 1990:- 4.5" Welex single screw Main extruder 30D vented. Hydraulic Screen changer Maag 56/ 56 Gear Pump. Static mixer., Welex ABA feedblock. 50 mm 24D Welex side mounted coextruder 900 mm wide EDI flex lip sheet Die 1040 mm wide Welex 3-Roll Cooling/ polishing stack 3 zone pump group 3-Roller Take-off conveyor 2 x Rubber Roll Take-off, with safety covers for the Rolls Intermediate Winder. Inline ILLIG RDM 70K, age 1990, with Schleicher PLC Controls :- Indramat Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Ryobi755 S-5-A

5 Farben Ryobi 755 2010 Generalüberholt Gebrauchtmaschine Format: 788 x 600 mm Druckzahl: ca. 180 Mio. Technische Daten: Min. Format: 279 x 200 mm Max. Format: 788 x 600 mm Geschwindigkeit: 15 Power: 39kW/42kW Nettogewicht: 22400 Kg Ausstattungen: Filmfeuchtwerk RYOBI matic inkl. Umwälzkühlgeret Saugbenderanlagetisch Programierbarer farbvoreinlauf Bogenlaufkontrolle Registerfernverstellung: Umfang, Seiten, Diagonal Ryobi-matic Filmfeuchtwerk GRAFIX Digital Densitometer PDS-E Technotrans Alpha d40 Kuehlung, Alkoholkonstanthalt Gummituch Wascheinrichtung Gegedruckwasch einrichtung AAC Damp Control AlcoSmart Ryobi PCS G Farbwalzenwasch-Einrichtung vom Pult aus gesteuert Halbautomatischer Plattenwechsel Einzel steurbare Auslagelüfter Ölbleche Bogenbremse Entelektrosieren in AN- und Auslage

Folding machines StahlK 66.3/6 KLFC2

-Stahl folder model K 66.3/6 KLFC2 -Year 1983, SIX buckles, two mechanical knives, Windows fold -Flat pile feeder, copy counter, air pump -Manuals, many parts and accessories, very nice conditions

RotatekRK 200 Plus

4 color Rotatek RK 200 Plus Built: 1997 With: 16 4/6”x 4 print cassettes 24” x 4 print cassettes 16 4/6” Archive hole 24” Archive hole Longlife line hole for double production (New) 25 4/12” magnet cross perf. Lengthperf Waterbased GP-Tinter, Brand new color change unit Unwind 50” Rewind 50” Re-insert UV Sutter and dryer 97 including fans BST Web camera Some parts and rollers Tools. In production. Can be inspected. WE SHIP WORLD WIDE!

Automatic working center for door and window frame SACF6

Code: 0386 Brand: SAC Model: F6 Automatic working center for door and window frames Technical data: Tenoning side : End cutting circular saw - n° 2 tenoning spindles each lenght mm 320 - Automatic table Profiling side : n° 2 profiling spindles each lenght mm 270 Glass bead recovery unit Hardware grooving spindle

CNC Measuring Machine DEA HEXAGONGlobal Perfomance

X-travel: 1200mm, y-travel: 2200mm, z-travel: 1000mm, measuring heads: RENISHAW SP25/ RENISHAW TP6, operating system: Windows 7, software: PC-DMIS, coeffizient/ resolution: 10.5/ 0.2µm, available after September 2018.

Sheet Coils Decoilers 2000 x 10ton RiboldiAR 20

Sheet unwinder/winder in the Riboldi AR 20 2000 mm x 10.000 kg motorized A.C. extension on wedges Max. 550 mm min. 460 mm hydraulic control welded steel construction efficient There is no documentation €17.000

Role cutters Kampfkampf

foil and paper power:600m min foilwidth max:1600mm unwindung max:1000mm Cutting width:min153mm,max1600mm

Find used machinery dealers in your country