wind used for sale

Format range: Cutting width max. 1120 mm, min. 80 mm Cutting length max. 1020 mm, min. 100 mm Film width max. 840 mm, min. 30 mm Film length max. 720 mm, min. 50 mm Equipment: 1 lane (preparation for 2 lanes) Suction belt feeder with vacuum, vibrator, cliché glue unit Other: Machine can be viewed by appointment while running.

Year: 2009 - technically efficient, ready to work – after full service - pneumatic clamps - cutting at 45° - two cutting discs: 225 mm + two scoring blades - measuring slider

Croissant wrapping machine Seewer Rondo SCR40. A0 - Croissat wrapping machine mobile - Manufacturer: Seewer Rondo - Model: SCR40, A0 - 400 volts

A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325N DT Number of spindles: 90 Number of sections: 10 Spindle type: Tangential belt drive Max. mechanical spindle speed: 9,000 min-1 Max. technological spindle speed: 7,000 min-1 Spindle pitch: 366 mm Whorl diameter: 52/64 mm Twisting range: 40 to 1,869 / 32 to 1,519 tpm Yarn count range: 167 to 560 dtex Feed Package - Type: Bobbin - Max. length: 290 mm - Max. diameter: 250 mm - Volume (smooth yarn): 4,500 g Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 250 mm - Tube diameter x length: 69 x 290 mm - Max. mechanical winding speed: 200 m/min - Max. technological winding speed: 170 m/min Machine Frame Dimensions - Number of sections: 10 - Length per section: 1,830 mm - Total machine length: 19,000 mm - Machine width: 860 mm - Max. height: 1,756 mm - Height to ...

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325 NF Spindles per section: 14 Number of sections: 1 to 12 Total number of spindles: 126 Spindle type: DT 140 Spindle drive: Tangential belt Max. mechanical spindle speed: 14,000 min-1 Min. mechanical spindle speed: 6,000 min-1 Max. technological spindle speed: 12,000 min-1 Whorl diameter: 35 mm Twisting range: 59 to 2,777 tpm Yarn count range: 33 to 330 dtex Feed Package - Type: Cops (ring-spun bobbin) - Feed package length: 420 mm Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 200 mm - Tube diameter x length: 56 x 230 mm - Max. mechanical winding speed: 150 m/min - Max. technological winding speed: 140 m/min Machine Frame Dimensions - Length per section: 1,830 mm - Total machine length: 2,554 + (1,830 x n) mm - Machine width: 860 mm - Max. height: 2,14 ...

Single Head Corner Welding Machine

TECHNICAL DATA: 02 Motors: TX3 – 3 axles, equipped with HSK63E mount – chain magazine with 46 places TX5 – 5 axes (C ±270°, W ±120°), equipped with HSK63F mount – magazine with 24 slots Machinable workpiece length: max. 7000 mm Wood cross-section: max. 300 mm Machinable workpiece thickness: from 20 to 95 mm Loading buffer with 2 stations – simultaneous processing of 2 workpieces Videojet Laser Marking Liquid cooling for the spindles

Rotox Water Slot Mill

Length: 5000 mm Width: 100 mm Height: 2800 mm Year: 2011 0 Range+Heine coating system for coating individual wooden window components and frames for sale on behalf of a client ----------------------------------------------------------- Manufacturer’s technical description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Intended use of material from the relevant coating manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift (without forced drying) Process (1 cycle is run twice): - Flooding - Drying - Checking and applying joint sealant - Spraying - Drying -------------- -------------------------- Item 1 Conveyor technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially comprising: 3 drives with gear motors for the main  ...

Wrapping machine Fritsch CRH 120/400 Year of Make: 2015 Approx. 450 operating hours Condition: technically as good as new, visually few signs of wear 1-row operation 400 mm table width Output depending on the size of the piece, the number of windings and the feeding capacity: max. 5000 pieces/h Suitable for line combination

Tenoning spindle: 2 Stk. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----------------------------------------- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturers Technical Description: ----------------------------------------- Item 1: Weinig Unicontrol 10 NC Window System ----------------------------------------- Cross-cut Saw -------------------------------------------------------------- with laser alignment light, motor power: 3 kW, spindle diameter: 40 mm, spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom roundin ...

Manufacturer: Ferber Textile Solutions Model: ACT+SP / ACC ES03 Type: 31.366-B Year of Manufacture: 2024 Max Load Capacity: 1200 kg / 11772 N Max Speed: 3 m/min Electric Total Power: 0.66 kW Voltage: 380 V / AUX 24 V Weight Unloaded: 1134 kg Max Total Weight: 2334 kg Max Diameter: 2088 mm Control: Table of control included Certification: CE Indoor Use: Yes - flat surfaces and indoor only Find more here - .ucymachines/ Contact us at - sales@ucymachines

Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware sc ...

TOP Cone Winding Machine Universum HWM 50/70 EZ for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls Robust technology only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested Come and visit us!

Cone wrapping machine Universum HWM 30 for all spears such as Kornspitz and pretzel sticks, etc. TOP Universal - Winding Machine for all doughs for wrapping Robust technology Connection 400V, 16A-CEE plug Approx. dimensions: 600 x 700 x 1200, WxDxH Used machine overhauled with warranty Come and visit us!

TOP Cone Wrapping Machine Erka WMA 30 for all stalks such as Kornspitz and pretzel sticks, Simple cone wrapping machine mobile Connection 400V, 16A-CEE plug Used machine Visit our large exhibition!

Cone wrapping machine TOP Universum LWT 3/60-40J for all spears such as Kornspitz and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls robust technology! only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 1650 x 1000 x 1950 mm, WxDxH Used machine overhauled & SAB service Visit our large exhibition!

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 2 mm - angle range: 30-180 degrees - large heater - side supports - air preparation station

Cone wrapping machine Universum HWM 50/70 EZ for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Combi - Winding Machine Connection 400V, 16A-CEE plug Used machine

Stretch film wrapper with Siemens S7 straightening, needed

In need of repair - temperature controller defective! Single Head Welding Machine Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Double mitre saw Haffner DGS 1873400 for PVC profile blanks Technical data: Built in 1994 Diameter of the saw blades mm 500 2 motors per Kw 2.2 - speed 2800 Cutting length max mm 3400 Cutting length min mm 230 Cutting depth approx. mm 150 Swivel range 45-90 degrees Hydropneumatic saw feed Pneumatic workpiece clamping Control panel with double buttons 2 suction nozzles diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Glazing bead saw: Sawing Units 1 Length of scanning rod 1,500 mm and 3,000 mm Cutting length max 90 mm Diameter saw blade 175 mm Cutting height 25 mm Support length 1,500 mm Main motor 0.5 kW Saw blades fixed 45° For plastics Pneumatic clamps Saw feed manual

Year: 2008 - technically efficient, ready to work – after full service - automatic screw feeding system - pneumatic control - base - infeed and outfeed rollers

Year: 2015 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (retaining and pressing) - through-feed - adjustable height: 500 mm (liftable) - adjustable vertical angle from 0 to 7 degrees - working width: 3500 mm

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table

A roll material processing machine MAG is offered. Min./max. material width: approx. 5mm/50mm, material thickness range: approx. 0.05mm to 1.5mm, reel mandrel diameter: 76mm, usable mandrel length: approx. 60mm, max. roll outer diameter: approx. 300mm, guide roller diameter: approx. 40mm, material guide track width: approx. 50.5mm. Inspection possible by prior arrangement.

Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab Model: Octopus 1800 BFTS Machine Type: Automatic ring pallet wrapper Year of Manufact ...

A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only.

- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

-Croissant wrapper for non-stuffed products -also suitable for Fritsch CTR -Type: CRH-120/400-636 Single Row TW-R -400 volts -Year of construction 2010

Year: 2006 - technically efficient, ready to work – after full service - screwdriver - automatic screw feeding system - tilting table top - fittings punch (straight cut)

Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement ...

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----------------------------------------- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturers Technical Description: ----------------------------------------- Item 1: Weinig Unicontrol 11 Window System ----------------------------------------- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw -------------------------------------------------------------- With laser alignment light, motor power: 3 kW, spindle diameter: 40 mm, electronically variable spindle speed with brake: 3,000–6,000 rpm. Ma ...

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Weinig Unicontrol 10 (UC 10) mitre saw system for the manufacture of windows, components and doors. Suitable for frame-by-frame, batch or individual part production, with 2 tenoning and slotting spindles, including an Oertli tool set Units: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, Technical data: Clamping length: 640 mm (8 x 80) mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Number of milling spindles: 2 St. fence: ja ja /nein workpiece: ja STEGHERR Cross-bar Milling Machine, Type KSF-mini -------------------------------------------------- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERRs extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors, workpiece clamping is pneumatic. The profile cutter is designed to match the web width. The saw blades that perform the ...

- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm - measurement reading scale - manually adjustable stop + locking lever

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate > Position: horizontally below > Motor power ...

Manufacturer: Universum J. Kasper GmbH Type: LWT 3/80 Prem-50J-EB2W/40 A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

5-blade wind generator for 5 kW per day (500Wp), complete with controller. Never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-49495-230

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 40/50 mm Weinig Unicontrol 6 -------------------------------------------- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw -------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ------------------------------------------- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle -------------------------------------------- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood ...

Tenoning spindle: 1 St Number of milling agregates: 4 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled -------------------------------------------------------------- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel Touch. With the following machining units: Crosscut saw -------------------------------------------------------------- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ------------------------------------------------------------- Axially adjustable with crosscut saw Tenon and slotting spindle --------------------------------------------- ...

5-blade wind generator for 5 kW per day (500Wp), complete with controller, never used Overall dimensions: 1000 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-49514-171

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery -------------------------------------------- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ------------------------------------------- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. to ...