wind used for sale

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window system ---------------------------------------------- Manufacturers description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transvers ...

The machine is ideal for short lengths (30, 50 or 100m) either in full width, or you can also divide into different widths, from a maximum of 1600 mm. Thanks to the 4 take-up shafts, the machinist is able to unload and position a new sleeve while the machine is still winding. This brings an enormous amount of extra power at the end of the day, as there are only short downtimes. The machine is still in daily use and sample materials can be tested daily. We would then disassemble the machine, pack it and put it on a stable pallet. 20ft containers can be loaded via the ramp.

Vertical clamp for windows ITALPRESSE

Universum Cone Winding Machine Winding Machine - Manufacturer : J. Kasper GmbH - Type: HWM 50/70 EZ - Winding machine for wrapping croissants, croissants, etc. - 400 volts 50 Hz - YOC: 2015

Hello, We hereby offer you a used, self-propelled stretch wrapping machine (pallet wrapper), manufacturer PKG, type Motion. Manufacturer PKG SRL Model Motion Year of manufacture 2018 Max. circumference speed: 93m/min. Battery equipment: Standard AGM/Gel batteries 12V – 110Ah, both batteries were replaced at the end of last year. Charging cycle 8-10 hours Pallet dimensions: min. 500 x 500mm, max. unlimited Max. winding height: 2,200mm Min. winding height: 500mm Turning radius: 1,100mm Electr. Battery charger connection: 230V, 50Hz Charger: High frequency charger in the machine Machine weight: approx. 400kg Slide: Film Type: Machine Stretch Film Roll diameter: max. 250mm Roll height: 500mm Roll weight: ~20kg Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we c ...

Year: 2003 technically efficient, ready to work – after full service flash limit: 0.2 – 2 mm maximum welding dimension: 2400 mm support path programmable PLC controller automatic welding process

A Sahm precision cross winder 260E is offered. Traverse width stroke: 300mm, winding speed max.: 500m/min, bobbin diameter: up to 320mm, bobbin volume max.: approx. 22.4dm³, titer range: tapes: approx. 150dtex - 3500dtex, monofilaments diameter: 0.15mm - 0.60mm. Inspection by appointment possible.

Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 200 ...

2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe.

Squirrel wrapping machine Erka WMA 30 Winding belt width 320 mm for all stalks such as Kornspitz and pretzel sticks, Connection 400V, 16A-CEE plug Used machine overhauled with warranty

Number of spindles: 3 St. Number of tools: 8 St. Spindle diameter: 50 mm Dimensions (L/W/H): 4250x1850x2300 mm ! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION ! ! Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel,  ...

Squirrel wrapping machine Erka WMA 30 Winding belt width 320 mm for all stalks such as Kornspitz and pretzel sticks, Squirrel wrapping machine mobile Connection 400V, 16A-CEE plug Used machine

wire diameter - max.: 2,5 mm wire diameter - min.: - mm workpiece length - max.: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winding machine / croissant wrapping machine Product description Condition: used, functional, baker's condition Winding machine for pretzels, croissants, etc. Exterior dimensions: W.: 68 cm, D.: 56 cm, H.: 119 cm Details see pictures.

wire diameter - max.: 2 mm wire diameter - min.: - mm workpiece length - max.: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Squirrel wrapping machine / winder Fritsch Rollex â Product description âœ" Manufacturer: Fritsch âœ" Type: Rollex âœ" Condition: used, not tested, baker's condition âœ" Exterior dimensions: W.: 50 cm, D.: 88 cm, H.: 113 cm For details see pictures.  

wire diameter - max.: 5 mm wire diameter - min.: - mm workpiece length - max.: - mm total power requirement: 7,5 kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cone wrapping machine with dough strand long moulder Universum 40/60 EZ Manufacturer : Universum Type : 40/60 EZ 380 V 50Hz On rollers Roll out croissant pretzel sticks, roll out spots, fold in ribs, roll out pretzel strands and braided strands. Details see picture

A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible.

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece

Cone wrapping machine Universum LWT 3/80-HWM50I for all spears such as Kornspitz and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls Longitudinal knit width 800 mm for roll lines with transverse discharge Connection 400V, 16A-CEE plug Used machine from the bakery

Slotted discs, window milling tools, indexable inserts for window construction tools, wood milling tools, wood milling cutters Slotted discs, milling tool for wooden windows, wood router bit, milling head, milling tool, wood router bit, profile router bit -Manufacturer: VIVALDI, window milling tool -Outer milling cutter: Ø 172 mm -Height: 100 mm -Hole: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 8.2 kg

Winding machine Croissantwinding machine SEEWER RONDOÂ Winding machine for the production of croissantsRoller width: approx. 27 cmSetting from 1 to 4Technical data:Manufacturer: Seewer Rondo, SwitzerlandType: SGRI,A 400VThe condition: Baker's conditionDimensions:Width: approx. 48 cmDepth: approx. 25 cmHeight: approx. 35 cmCondition: Baker's conditionDetails see pictures

Slotted discs, window milling tools, indexable inserts for window construction tools, wood milling tools, wood milling cutters Slotted discs, milling tool for wooden windows, wood router bit, milling head, milling tool, wood router bit, profile router bit -Manufacturer: VIVALDI, window milling tool -Outer milling cutter: Ø 190 mm -Height: 90 mm -Hole: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 9.9 kg

Used Croissant Wrapping Machine / Winder Fritsch RollexProduct DescriptionManufacturer: FritschType: RollexExterior Dimensions: W: 50 cm, D.: 88 cm, H.: 113 cmThe Fritsch Rollex croissant wrapping machine is a special machine used in bakeries and pastry shops to shape and wrap croissants and croissants automatically and precisely. This machine allows efficient production of uniform and professional-looking croissants by optimally shaping and rolling the dough. The Fritsch Rollex is characterized by its reliability, high performance and

Used cone wrapping machine Universum 50/70The machine needs to be overhauledManufacturer : Kasper UniversumType : 50/70400 V 50Hz 1,1AAn rollersRoll out croissant pretzel sticks, roll out spots, fold in ribs, roll out pretzel strands and braid strands. The Universum 50/70 croissant wrapping machine is a special machine used in bakeries and pastry shops to shape and wrap croissants or croissants. This machine helps to portion, shape, and wrap the dough for croissants automatically, which makes the process more efficient and faster. The

used croissant / croissant wrapping machine UNIVERSUM KASPER 40 GR AHorn wrapping machines KASPER Universum 40/60 GR AProduct description:Manufacturer: KASPERTyp: 40/60 GR AByear of construction : 2003Connected load: 400 VoltThe wrapping machine UNIVERSUM KASPER 40 GR A is a machine used in bakeries and pastry shops to form and wrap doughs. With this machine, dough pieces can be made into various shapes such as round rolls or elongated baguettes. The wrapping machine enables efficient and uniform processing of large quantities of dough and saves

Croissant slicer & wrapping machine Fritsch CTR 700/30 Product description Manufacturer: Fritsch Type: CTR 700/30 Year of construction: 2000 Condition: used, cleaned, functional Used Fritsch CTR system Incl. various rollers Connected load: 3x 400 V / N / PE / 0.5 kW The machine we have connected electricity and air. Unfortunately, there is not enough bar. Therefore, a technician needs to look for details see pictures.

Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 195 mm -Height: 100 mm -Socket: Ø 40 mm -Weight: 9.1 kg

A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible.

Slotted discs, window milling tools, indexable inserts for window construction tools, wood milling tools, wood milling cutters, milling tool for wooden windows, wood router bit, milling head, milling tool, wood router bit, profile router bit -Manufacturer: VIVALDI, window milling tool -Outer milling cutter: Ø 207 mm -Height: 75 mm -Hole: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 6.7 kg

Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 185 mm -Height: 75 mm -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 5,8 kg

Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Window processing line, CNC window manufacturing plant, window angle system, clamping device -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 180 mm -Geared motor: SSB type SSB DS-SgFFH008 0.25 kW / 405/57 rpm -Encoder: ferrocontrol SAE-1020 H -Number: 2x clamping device available -Price: per piece -Dimensions: 850/450/H240 mm -Weight: 42 kg/pc.

Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen. max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300 mm, Maschine ...

Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant str ...

Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992

Winding roller, winding shaft, tensioning shaft, pneumatic expansion shaft, reel, reel rod, trapezoidal thread spindle, spindle, unwinding reel, unwinding reel, sheet metal unwinder -Manufacturer: Tidland, winding shaft -Type: G890E -Drive shaft: Ø 40 x 80 mm -Mounting: Bolt circle Ø 220 x 11 mm -Number: 8x winding shaft available -Price: per piece -Dimensions: Ø 250 x 855 mm -Weight: 53 kg/unit

Window system WEINIG, Unicontrol 6, S/N 035-823, built in 1997 TECHNICAL DATA:  Pneum cross-cut saw. clocked (3 KW) with laser directional light  Slotted spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW  Synchronous spindle 50 x 120 mm - motor 7.5 KW  Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW  Fitting spindle pneum. clocked 40 x 160 mm - motor 3 KW  Saw/groove spindle horizontal top, pneum. clocked - motor 3 KW  Feed adjustable from 6-12 m/min. - Motor 1.1 KW  Screen control for 99 window types  Support strip for rung production pneum. Timed  Studio window setup with digital angle display  Length stop up to approx. 3,500 mm  Milling device with support rail  Return transport device to the machine operator  Machine complete with operating instructions, circuit diagrams, spa ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm # 6726 Weinig Unicontrol 12 CNC -------------------------------------------------------- Sale on behalf of a customer. Machine connected and ready for demonstration. crosscut saw -------------------------------------------------------- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate -------------------------------------------------------- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm -------------------------------------------------------- 1. tenoning Spindle ---------------------- ...

Double Head Welding Machine Urban Plastic Window Welding Machine Type: AKS 4110 Year of Make: 2/91 Working length max. 3090 mm Connected load 6.5 kW Operating pressure 8 bar Air requirement per weld 15 l Electronic temperature control Welding level 0 – 300°C Electronic temperature control Welding limitation 35 – 65°C - Heated blade welding bead limitation 2 mm - Welding of 2 corner joints at an angle of 90° in one operation. - Fast and accurate insertion of the profile thanks to the automatic welding head feed. - Automatic weld adaptation to different profile cross-sections - Safety clamping systems that automatically adjust to different profile heights. - Guide elements made of hardened, ground shafts with recirculating ball bushings. Machine dimensions: L 4015 mm x W 1100 mm x H 1840 mm Weight: 790 kg

Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg

Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.

Range : ø 20-75 mm (SDR 11 & 13.6) Core diameter : 760-1600 mm Width : 140-500 mm Outer diameter max. : 2700 mm Remark : Incl. cutter, binding unit, ejector

Dimensions (L/W/H): 660x460x1200 mm Weight: 49 kg Total power requirement: 0,85 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cone wrapping machine Universum HWM 50/70 EZ for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested with warranty + spare parts service

Length: mm Width: mm Height: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.