128,879 used machines on RESALE, but how to find them? Machine Search
Length: 5200 mm Width: 1200 mm Height: 900 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: 4500,6000 mm profile spindle: 3 Stück main drive: 24 kW Control: Siemens 840d Working Process Logos Life Evo XS 2345 ------------------------------- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Length: 5000 mm Width: 750 mm Height: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Length: 2700 mm Width: 770 mm Height: 1250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
With roller shutter and mosquito net Auction-ID: A1-44302-440
max. workpiece length: - mm profile spindle: - Stück main drive: - kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...
Universum Winding Machine Type: LWT -3 - EB 2-40 with transport work table wood Long castors and flat castors Stainless steel cladding 380 V 50Hz on rolls Dimensions universe: Height: 170cm Width: 170cm Depth: 80cm Dimensions table Height: 85cm Width: 200cm Depth: 100cm
I sell the Fensterbau Profil Umfälzautomat Zentrum Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 4 pcs. available. Condition very good !
Wrapper Model: MK 30 Dough weight up to approx. 250 grams Winding bandwidth 320 mm Plastic-coated feed rollers for all rods such as Kornspitz and lye rods, Universal winding machine Stainless steel Input bay with safety switch bar DGUV V3 tested Croisser winding machine mobile Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled with 6 months warranty
Auction-ID: A7-45209-4
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg
I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !
Winding machine Böhl type SENIOR / S-2400 VA Specifications: • Fully automatic • For packaging rod-shaped products • Product height (mm): 19 - 600 • Product width (mm): 600 - 2100 • Product length (mm): 2400 - 5700 • Product weight (kg): 3000 • Cross-sectional diagonal max. (mm): 2184 • Brake motor for winding ring drive: controlled by frequency converter • 2 driven roller conveyors: each 3000 mm long for the inlet side of the machine, designed with brake motor • 2 driven roller conveyors: for the outlet side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long) designed with brake motor • 1 packing material holder: for stretch film, crepe paper, PE film etc. • Packing material roll width max. (mm): 500 • Automatic gripping, cutting and laying device: for PE stretch film, in version as smooth cut • Electrical device for laying edge ...
Roof window roller shutters, blinds, roller shutter slats -Quantity: 1x roof window roller shutter available -External dimensions: 1700/480/H180 mm -Weight: 19.3 kg
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 8.5 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 3x available -Price: per piece -Dimensions: 320/235/H185 mm -Weight: 23 kg
I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !
End milling machine GRAULE AKF 6/250 Single head saw GRAULE ZS 170N Copy router MECAL FR 811 Corner crimper WEGOMA EV 175
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 60 rpm -Power: TA = 5 Nm -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 700/225/H210 mm -Weight: 30 kg
Qty. 1 Second-hand bifilar pipe winding line Mfc.: GRAEWE GmbH Type: AEW 1000 Built: 1998 Tube dia.: 10, 12, 14 & 16 mm Coil core ID: 940 mm OD: 1250 mm Bifilar coiler Type: EW 1000 PLC Simatic S5 Consist of: De-coiler Coiler Ring coiler Bending unit Support table Cutting shear Binding device Electrical Control
I am selling the Colombo Angelo Figli AM33/AF window angle system. Year of construction 2005. Pin side saw + 620mm spindle fully servomotor. Roll forming side 3 spindle + strip cutting unit fully servomotor. Milling heads VYDONA WOOD EU78-92, wood-aluminum 92 everything programmed into the machine and included / possible to bill if not accepted. Combined power 50KW Weight 6000kg. Compact size, cheap also for small workshops. Available right in stock. Condition very good. Complete system with tools / possible to bill if not accepted. Please contact us for more photos and info.
I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !
I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.
Used carton wrapper by CAM in 2014 model G35 Machine in very good condition. Full technical documentation available and detail description below. Year of manufacturing 2014. Technical data and packaging length: mm. 2635 width: mm. 1595 height: mm. 1635+90-10 net weight: 1350 kg gross weight: Kg 2000 minimum speed: 6/1' cycles Maximum speed: 35/1 cycles Film Roll Autonomy: 8-10 hours volume:
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Performance: TA 2.0 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 1x available -Price: per piece -Dimensions: 285/235/H176 mm -Weight: 16.5 kg
Type: Elixa 35 Libra Year of construction 2017 Capacity up to 35 packs per minute - Automatic shell detection - Automatic weighing system - Film type: • PVC or PE stretch film • Film width 280 mm Machine is in very good condition. Is dismantled and can be visited in Leipzig.
BÖHL JUNIOR S-450 VA fully automatic wrapping machine for all types of long goods Product Dimensions • Width 80 – 220 mm • Height 50 – 100 mm • Length approx. 2,000 mm to 6,000 mm • Weight approx. 30 KG • Maximum cross-sectional diagonal 311 mm Packaging materials • PE stretch film thickness approx. 7 – 50 my (recommended 23 my) • Roll diameter 220 mm • Roll width 250 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) • PLC control Siemens S7-200 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 2 KW • Back-up fuse 25 A • Noise level 79 db • Operating pressure 6 bar • Air consumption approx. 20 standard litres per cycle Technology • Automatic smooth-cut cut-off unit for th ...
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 0.78 Nm -Speed: 910 rpm -Shaft: Ø 14 mm -Construction: B3 -Number: 8x available -Price: per piece -Dimensions: 235/210/H150 mm -Weight: 11.2 kg
BÖHL JUNIOR S-450 VA fully automatic packaging machine / wrapping machine for spiral wrapping of long goods with packaging material (typical stretch film) Product Dimensions • Width 15 – 220 mm • Height 15 – 120 mm • Length approx. 600 / 800 mm to 6,000 mm • Weight approx.max. 3000 KG / 6 meters incl. car Maximum cross-sectional diagonal of the product: 220 mm (customized) Attention: max. weight only possible if driven by the on-site roller conveyor. (A) 600 mm without trolley (B) 800 mm with trolley or distance between carriages min. 600 mm Packaging materials • PE stretch film thickness approx. 17 – 50 my (recommended 23 my) • Roll diameter max. 400 mm • Roll width max. 125 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) Specificatio ...
Winding drive, rewind drive D75mm and D150mm, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Winding drive, rewind drive D75mm and D150mm consisting of: 1) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 2) Hypoid gear, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, 3) Winding spigot for reel support, series 3233, D75mm, Spanntec, 4) Attachment adapter for reel support, series 5230, D150mm, Spanntec, 5) Attention: Optionally, we also have the matching motor module SINAMICS S120 6) You are wel ...
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg
Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...
Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg
Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Hole: Ø 50 mm -Weight: 14 kg
Type: Industrial Winder Fritsch CRH120/400 Cone Winder with inlet and outlet belt made of silicone fabric new winding tapes Band width: 400mm Version in stainless steel Machine is mobile Connection: 400V, 1kW, 16A CEE plug Condition: completely repaired and in good condition
Siat HSD 312 - S Semi-Automatic Plate Winding Machine Version with horseshoe turntable for easy loading with a pallet truck Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of construction: 2000 Capacity: 1200 kg Turntable: with fork recess Turntable diameter:1500 mm Adjustable rotation speed of the turntable Motorized foil pre-stretch adjustable to 100% or 200% Turntable height: 75 mm Winding programs Program 1: Double wrapping with raising and lowering of the film trolley Program 2: Double wrapping with lifting – pause to attach the top cover of the pallet – and lowering the film trolley Program 3: Easy wrapping with just lifting the foil trolley Program 4: Easy wrapping with lifting of the foil trolley and pause to attach the top cover More items - new and used - can be found in our shop! International shipping costs on request!
OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...
20 pieces of plastic windows used, good condition not openable, with frame
Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 15 kg
Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 9 kg
Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg
Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Hole: Ø 40 mm -Price/Sale: complete -Quantity: 1x pallet of tools, various sizes -Weight: 46 kg
maximum number of results exceeded
please refine your search
10 € 
