wind used for sale

Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air.

GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerType of Measuring system Direct measuring systemPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 900 KgCentre bore 50 mmTable surface 630 x 630 mmMotor ...

Number of winding positions: 840, an on-site inspection is possible.

Installation space (x,y,z): 297 x 210 x 200 mm, printing technology: Multijet technology, Layer thickness: 20µ, 15µ, resolution xy: 635 x 400 DPI, Installation: 2015, equipment: Software, cable, heat bath, file formats: STL, Accessories post processing: On demand, network connection: Ethernet, mass: 188 kg, Dimensions: 1360 x 944 x 700 mm (H x W x D), mains voltage: 100 - 240V, 50/60Hz,single phase, max. 750 VA, Legal regulations: CE approval mark, Net installation space for models: 297 x 210 x 200 mm, printheads: 1 piece, Interface: Modeling Studio, software: Windows 32Bit / 64Bit, printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]), support material: AR-S1 (water soluble support material), Accessories post-processing: On demand, Installation space (x,  ...

Polyjet printer Objet 1000Plus with Krumm Waterjet Objet 1000 for sale., Installation space in mm (x/y/z): 1000x800x500, Max. component weight (kg): 135, Dimensions in mm (w x h x d): 1960x2868x2102, Weight in kg: 2200, Resolution DPI (xyz): 300 DPI; 300 DPI; 1600DPI, minimum layer thickness (μm): 16, software: GrabCAD Print, network connection: LAN - TCP/IP, Power supply: 230VAC 50/60Hz; 8A single phase, certification: CE, FCC, Installation: 2015, Building platform: 1.000 x 800 x 500 mm, Max. construction volume (xyz): 1.000 x 800 x 500 mm, Min. wall thickness: 0.6 mm (0.8 mm for Digital ABS), Achievable accuracy: 0.1 - 0.6 mm (depending on component geometry, size, orientation, material and print mode), Resolution (xyz): 300 x 300 x 1,600 dpi, Horizontal layer thickness: High Quality 0.016 mm High Speed/ Multimaterial 0.034 mm, Number of print heads: 8 (with 96 nozzles each), Materi ...

Full-color multi-material 3D printer J720 Dental for use in the laboratory. Very good condition., Installation space in mm (x/y/z): 490x390x200, Layer thickness: up to 14 microns, Dimensions in mm (w x h x d): Printer: 1400x1260x1100 Material cabinet: 670x1170x640, Weight in kg: Printer: 430 Material cabinet: 152, building material: Dental Materials - VeroDent (MED670) and VeroDentPlus (MED690) • Vero™ family of opaque materials, including neutral shades • Bright colors such as B. VeroCyanV™, VeroMagentaV™ or VeroYellowV™ • Tango™ and Agilus30™ product families made of flexible material • Transparent VeroClear™, digital materials: Unlimited choice of composite material, e.g. B.: • More than 500,000 colors • Material to reproduce soft tissue in various Shore A hardness levels • Transparent shades • Composite materi ...

Working width: 2000mm, max. roll diameter: 800mm, length: 2700mm, width: 1250mm, height: 2050mm, weight: 250kg, with documentation, light table for transmitted light, light from above, winding and unwinding, side shift during winding, winding speed adjustable and counter, an on-site inspection is possible, has been regularly serviced, no videos available.

Working width: 1900mm, with center winder, drive, accumulator, fettling box, fettling & shearing machine Vollenweider, inspection Uster and destacker, the inspection Uster was renewed in 2021.

Artec Eva 3D scanner in very good condition with power supply and USB cable., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm up time necessary, Colors: 24 bpp, color resolution: 1.3 mp, Light source: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rate, up to: 16 frames/s, recording duration: 0,0002 s, data collection rate, up to: 2 Mio Points / Sec., multi-core processor: Yes, 3d formats: OBJ, PLY, WRL, STL, AOP, ASCII, Disney PTEX, E57, XYZRGB, Playback format for measurements: CSV, DXF, XML, mass: 0.85 KG, Dimensions, hxdxw: 262 × 158 × 63  ...

Includes printing, window cutting, window patching, drying and folding.

Includes printing, window cutting, window patching, drying and folding.

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

With window station, printing units, outside and inside print, gumming reel splicer, hotmelt and window splicer,

CS744-MHC analyser with built-in oven and automatic oven cleaning, free-moving touch screen mounted on the instrument, LECO Cornerstone control and operating software, PC, Windows operating system, keyboard, mouse and documentation.

Year of construction: 2010 Control: NC control PC base Touch control panel Networking Spindle: HSC SK30 Tool changer: 5 fold 5 axes Isel linear guide Parts unit: Harmonic Drive A-axis Omron Engines Blank clamping via A-axis such as lathe with tailstock Machine frame kpl. Aluminium Plexiglas window on all sides Two large sliding doors Large recess for suction under A-axis - Technical errors and prior sale reserved. -

Working area: 1980x3200x65mm, outfeed belt width: 3000mm, vacuum pump power: 18kW, operating system: Windows 10, software: Cuttec GNE with import and export of DXF files, optionally available is a Link Conveyor CTGF, dimensions: 6000x2000mm, controllable from the cutter and foot switch, including film unwinder with sensor control, multi layer plates, vacuum pump with integrated filter and two integrated hollow drilling devices.

Max. roll diameter: 500mm, track width: 320mm, speed: 250 prints/min, max. printing width: 300mm, max. printing length: 300mm, including winder and unwinder, without track inspection and edge controls.

Year of construction: 2014 Control: NC control PC base 2x touch control panel Networking Spindle: HSC SK30 Tool changer: 4 fold (optional further 4 fold changer) 5 axes Two processing rooms / alternating operation Bahr linear guide Parts unit: 4x Harmonic Drive A1-4 Yaskawa Engines Blank clamping via A-axis such as lathe with tailstock Machine frame kpl. Aluminium. Base plate stainless steel Plexiglas window on all sides Two pneumatic sliding doors Four cleaning doors Large recess for suction under A-axis - Technical errors and prior sale reserved. -

X-travel: 300mm, y-travel: 200mm, z-travel: 200mm, operating system: Windows 7, software: WinWerth 8.40, weight: 1.5t.

Measuring area: 400x400x300mm, with high-resolution CCD camera, lens 1.5x field of view 4x3mm, CNC control Pantec WPC2030, industrial cabinet Rittal, dimensions: 850x750x1630mm, the measuring device can be upgraded with probe system Renishaw, measuring uncertainty E2=(2.0+L/300)µm, industrial computer with Windows 10 and measuring, control and evaluation software Saphir 5.8.

X-travel: 300mm, y-travel: 300mm, z-travel: 200mm, accuracy: E1 = (2.0 + L/300) μm mm, E2 = (3.0 + L/300) μm mm, E3 = (3.9 + L/300) μm mm, magnification: 1.5x, connected load: 1kW, in 2020 the machine has received a current version of the measuring software SaPHIR and Windows 10, after 2021 the machine has been used only rarely and has not undergone any maintenance/calibration, the Z-axis needs lubrication.

This is a machine for the production of mailing bags and envelopes, number of colors: 2, max. output: 500/min, max. paper roll diameter: 1500mm, connected load: 73kW, length: 28,280mm, width: 2500mm, height: 3100m, with documentation, without window station, an inspection on site is possible, the machine is located in Western France.

With computer, Windows XP, tray support, 12x feeder base plate and documentation, over the years the following parts have been replaced: placement head (Z-axis), control board placement head, main board laser, all belts, head cable, PC (already with Windows XP), the placement machine last ran in 2020, since then it has been unused, was maintained regularly.

DESCRIPTION Beck Packers Series Packer S1750 X Fully automatic film packaging machine for four-sided product shrink-wrapping Fully automatic, belt feeding with light barrier control Functioning: The beck series packer works fully automatically with photoelectric product scanning. The goods to be packed are introduced by means of a conveyor belt into the cross weld seam and Shrink-wrapped there in cycles on 4 sides. The film rolls are mounted above and below the conveyor belt. For the production of skin-tight shrink packs, the packaging machine can be equipped with the proven energy saving beck thermal shrink can be extended to a complete film packaging line. Specifications: Standard operating page: right Welding punch width: 550 mm Punch closure: servo-motor Welding system: permanently heated Passage height: 100 mm Belt width inlet: 140mm Belt width spout: 1 ...

Max. PCB dimensions: 410x410mm, max. PCB weight: 5kg, connected load: 1.5-6.4kW, software: Windows 98, with documentation, the machine should be overhauled, there are various defects.

Semi-automatic pallet wrapper S 140 Semi-automatic pallet wrapper Foil elongation adjustable by mechanical brake Gentle start-up and outlet of the turntable by means of frequency converter Four different winding programs are available: 1. Manual 2. Single spiral winding, 3. Cross spiral winding 4 Cross spiral winding with cover sheet Automatic height scanning of the pallet by light barrier Separate adjustment of the number of head and foot windings Precise turntable positioning through fixed-stop Load capacity of the turntable 1,200 kg Turntable diameter 1,500 mm max. winding height 2,100 mm (without hold-down) Turntable speed adjustable from 5 to 12 rpm. max. pallet dimensions: 1,200 x 800 mm (L x W) Voltage: 230 V 1 Ph, 50 Hz SPINNY S 140 can be easily tailored to customer-specific requirements and can be equipped with numerous additional features. Some examples: tur ...

: neu : ca. 10 Wochen ab Auftrags : Spanien : 24100 € : 1000 mm : 400 mm : 12 m/min : 0,2 mm : 0,1 mm : 300 kg The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat. THE ASSEMBLY CONSISTS OF: Mounting plate. Table assembly with X” and Y” axis driven by servo motors. B&,R Power Panel 500 PC based 15” touch screen control Each axis X” and Y” has servo motors with built encoder for precise measurement. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: The position of the holes to be punched is programmed either in absolute or incremental dimensions. When the control is started up, the guide stops are positioned for first hole. The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles. After the punch has returned ...

Pallet wrapper ROTAX S3200 Electro-magnetic foil brake. In the standard version, the machine is used to protect palletized loading units of max. 1200 mm length, 1200 mm width with stretch film. The standard winding column is available for winding heights up to 2100 mm, on request, the winding height can be increased up to 3000 mm. The rotation speed is adjustable from 4 to 15 rpm The drive of the film carriage is also frequency-controlled and allows the up and down speed of the film carriage to be adjusted separately. The PLC control and additional control board offer ten winding programs, which can be estimated by password. Foil carriage protected by safety gear TECHNICAL CHARACTERISTICS ROTAX S3300 Driven pre-stretching system UP TO 300% In the standard version, the machine is used to protect palletized loading units of max. 1200 mm length, 1200 mm width with stretch f ...

Size: 520 x 850 mm Equipments: 1 window pocket Compressor 6 bags delivery

Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) is perfect solution for longitudinal cutting of coil metal into strips. This line can work with very big coils up to 74,000 Lb weight and 0.25 inches maximum metal thickness. Line is strong enough to make cutting speed 200 – 600 fpm depends on metal thickness and width you work with Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Manufacturer: PRO ECO Material: CRS, HRS, HPP & O Material Width: 12″ – 72″ Material Thickness: .060″ – .250″ Coil Weight: 74,000Lb Coil ID: 20″ – 30″ / 20″ – 24″ Coil OD: 72″ Line Speed: 200 – 600 fpm Direction: L-R Three (3) Coil Storage Ramp Coil Car Powered Lift & Traverse Double Cone Uncoiler Sliding Base Dual Water Cooled Brake Feed-Up Motor Powered  ...

Key data: 3000 W, 1500 , 3000

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts  ...

Vertical 3-axis CNC machining center with nano precision Kern Pyramid Nano Year of construction: 2013 Heidenhain iTNC 530 Table size: 600 x 600 mm Table load: max. 250 kg Longitudinal travel: X 500 mm Transverse travel: Y 500 mm Vertical travel: Z 400 mm Smallest travel increment: 0.1 μm Feeds up to: X/Y/Z 30,000 mm/min. Rapid traverses up to: X/Y/Z 30,000 mm/min. Acceleration: X/Y/Z 10 m/s² Vector-controlled milling spindle: Spindle mount: HSK-25 Spindle drive power: 6.4 kW AC Spindle speeds: 500 - 50,000 rpm. Spindle torque (S1): max. 1.6 Nm Automatic tool changer: Tool magazine positions: 32-fold Tool holder: HSK-E25 Tool Ø (every second place free): max. 60 mm Tool length: max. 160 mm Tool change time: 3 sec. Chip-to-chip time: 6 sec. Machine weight: approx. 8,000 kg Machine height: LxWxH 2,850 x 3 ...

Fritsch pastry line type Easyline - Built in 1999 consist of: Calibration head Cutting roller frame for 2 tools 1 piece worm roller Filling device, 4 rows - Year of construction: 2021 Guillotine various tools, folding shoes, etc. available after consultation Fritsch Croissant Plant Year of construction: 1999 composed of: Punching robot type CTR-700 Winder type CRH 400 (unfilled products)

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for si ...

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 progr ...

Hydraulic fine planing machine Weinig Uniplan 23 for two-sided surface finishing, as an alternative to grinding (e.g. in window construction) with high-performance spindles. • Very good original condition., spindle: 2, working width: 230 mm, working height: 120 mm, spindle 1: Below / 7.5 kW, spindle 2: Above / 7.5 kW, feed: 3 kW // max. 36 m/min, Spindle speed: 7,200 rpm, jointer: Yes, Counter bearing: Yes, short parts package: Yes

Planing and molding machine Weinig Unimat 23 (U23) for four-sided planing and profiling of pre-planed wood, strips or MDF with additional strip removal as special equipment, e.g. for window production (glass strip removal). Very good original condition., spindle: 8, working width: 230 mm, working height: 120 mm, spindle 1: Top / 7.5kW / 40mm, spindle 2: Bottom / 7.5kW / 40mm, spindle 3: Right / 5.5kW /40mm, spindle 4: Left / 7.5kW / 40mm, spindle 5: Left / 7.5kW / 40mm, spindle 6: Right / 7.5 kW / 40 mm, spindle 7: Left / 7.5kW / 40mm, spindle 8: Universal / 4kW / 40mm, feed: 7.5kW

This Fortus 450mc has been used very little. The number of operating hours is approx. 260h and the last maintenance was carried out in 07/2019., operating hours: approx. 260 hours, Installation: 02/2021, Installation space in mm (x/y/z): 406×355×406mm, software: Control Center™, GrabCad Print (Download), Insight Software License, network connection: LAN (Ethernet), operating system: Microsoft Windows Server 2012 R2, Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-ESD7™, ABS-M30, ABS-M30i, Addigy® PA6/66-GF20 FR LS, Antero 840CN03, Antero™ 800NA, ASA, FDM HIPS, FDM Nylon 12CF, FDM Nylon 12™, Kimya Kepstan® PEKK-SC , Kimya PC-FR, PC, PC-ABS, PC-ISO™, ST-130, ULTEM® 9085 Resin (colored), ULTEM™ 1010 resin, ULTEM™ 9085 resin, Victrex AM™ 200, Layer thickness: 0,127mm, numb ...

Very little used Stratasys F370 for sale. Last maintenance in 07/2021, operating hours: approx. 120h, network connection: LAN (Ethernet), W-LAN, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (only 64-bit), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, printing features: Interchangeable Extruder, Heated Build Chamber, Closed Build Chamber, Two Extruders (Model & Support), printing technology: FDM - Fused Deposition Modeling, number of nozzles: 2, nozzle diameter: T14 (0.3556mm), Layer thickness: minimum 0.127mm

BÖHL JUNIOR S-450 VA fully automatic packaging machine / wrapping machine for spiral wrapping of long goods with packaging material (typical stretch film) Product Dimensions • Width 15 – 220 mm • Height 15 – 120 mm • Length approx. 600 / 800 mm to 6,000 mm • Weight approx.max. 3000 KG / 6 meters incl. car Maximum cross-sectional diagonal of the product: 220 mm (customized) Attention: max. weight only possible if driven by the on-site roller conveyor. (A) 600 mm without trolley (B) 800 mm with trolley or distance between carriages min. 600 mm Packaging materials • PE stretch film thickness approx. 17 – 50 my (recommended 23 my) • Roll diameter max. 400 mm • Roll width max. 125 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) Specificatio ...

Double-sided (top / bottom) grinding machine steels Hess Saturn Roto Finish for fine grinding of window scantlings or other woods. Two units, each with several surface-grinding, rotating tools, which can also be rotate the sanding unit around its own axis and thus achieve cutting of the wood fibers with a simple adjustment of the wood type. Application e.g. as a grinding machine after a planing machine in window production., Working width max.: 240 mm, Max. wood height: 140 mm, Technical specifications: see PDF

Notching cutter Graule type AKF4/250 Specifications: • For window and door profiles made of aluminium and PVC • Milling spindle length (mm) 90 • Cutter diameter max. (mm) 250 • Milling depth up to (mm) 80 • Milling width (mm) 330

STAMFORD Synchronous Generator CG634J2 788 KVA, 630 KW 400 / 231 V 1137.4 A 50 Hz, 1500 1/min. Accessories: - Winding PT100 - AVR ABB Unitrol_1010 COMPLETELY REHAULED, with new bearings and winding impregnation

STAMFORD Synchronous Generator - 2000 KVA Type rating - 690/400 V - 1540 A - 50 Hz - 1500 1/min Completely overhauled with winding refurbished and new bearings.

Bundle consisting of Artec Eva 3D scanner and Artec Spider 3D scanner in very good condition with power supply, USB cable and carrying case. A license for the Artec Studio software must be purchased from Artec at a price of around EUR 2,000. A transfer of the previous license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, lightsource: Flash bulb (no laser), color resolution: 1.3 mp, Light source: Flash bulb (no laser), Lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rat ...

Many of our machines are available from stock. Call us to find out more. Fiber Laser Cutter FLV-3015-OE 3kW / VF1530-3000W Technical parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm - Maximum speed: 60000 mm/min - Maximum acceleration: 0.7 G - Maximum load: 1200 kg - Power: 3.0 kW - Power requirement: 24.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting thickness - Black steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Construction - Construction type: welded - Number of support legs: 8 - ...

max. workpiece length: 4400 mm profile spindle: 1 Stück main drive: 19,2 kW Control: Beckhoff CNC machining center MASTERWOOD 4 WIN --------------------------------------------------------- STOCK MACHINE: Immediately available! Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Different tool magazines for optimal tool loading - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of the workpieces - CNC controlled work table with automatic positioning of beams and Stretcher - Automatic re-clamping for changing between external and internal profiling - INTEGRATED window construction software, i.e. the machine does not have to (but can of course) can be controlled from the office with external industry software. - strong motor with 19.2 kW HSK-63 E Please note that this stock machine is with us in Oberkochen and ...

Stock # U2333-8 Used vertical stainless steel storage tank by Kates (PL) type 2Z1,6 with working volume 1600 l. Tank has internal dimensions: diameter 1280 mm x straight side of wall 1330 mm. Tank has slightly conical bottom with central outlet. Valve not included. Side walls and bottom are layered with stainless steel safety jacket (has inspection window). Top welded, has manway with bolted lid diameter 625 mm. Tank is mounted on three stainless steel legs with tension sensors and stainless steel supporting frame. Sensors are connected to scale panel which is in Ex design. Shipping dimensions (in horizontal position) L 240 cm x W 155 cm x H 170 cm x weight about 500 kg.

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one  ...

DIRECTLY FROM THE PRINT SHOP Offer consists of: MBO folding machine T800 with suction belt feeder - 1st factory 6 pockets + MBO window rebate pocket - FA offset sheet delivery built in 2001 with press rollers If you wish, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer