will used for sale

Stainless steel vibrating sieve for wet sieving, 1 deck with 915 mm, 2 outlets, with unbalance drive (approx. 1 kW) and springs. 2 pcs. available.

Vibrating sieve for wet screening, 1 deck with 915 mm (36) Ø, 2 outlets, with imbalance drive (ca. 1 kW) and springs. 2 pcs availabe.

Article: Black rubber Compensator Manufacturer: Wanda Type: black with length limiter Condition: used, very good Model: DN 100 PN 10/16

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 640 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 150 mm Table load max.: 25 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 385 mm B axis swivelling range: -110 / +30 ° Table speeds: stepless up to: 4000 rpm Holding torque of the table: 400 Nm Tool changer: Number of tools: 96 Tool diameter max.: 50 mm Tool lenght: 130 mm Max. tool-weight: 1 kg Time of tool changing: 0.8 sec Average chip-to-chip time: 3 sec Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Rapid traverse:: 60 m/min Acceleration: 10 m/s Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 10 / 15 kW Torque max.: 8 / 12 Nm Machine´s w ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: NUM 1060 Technical data Number of axis total: 5 Number of spindles: 11 Longitudinal travel (X-axis): 740 mm Transversal travel (y-axis): 185 mm Vertical travel (z axis): 220 mm Swivel angle (a-axis): 110 ° C axis: 360 ° Spindle positioning increment: 0.001 ° Bar diameter: 32 mm Spindle nose: ISO: 25 Spindle speeds:: (11x) stepless from: 50 rpm up to: 12000 rpm Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 20 m/min Rapid traverse: vertical: 20 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Machine´s weight about: 3500 kg Overall dimensions machine: Length: 2215 mm Width: 2500 mm Height: 2650 mm Various accessories: Set of toolholders (without tools) Set of collets

Hello, I will sell a powerful chipper of the German brand Willibald SR 5000 The engine of the reputable company MAN - 460 hp. These engines are distinguished by cheaper operation compared to concretions Year 1998 The chipper is in almost perfect condition for its age. The chipper is very well maintained in technical terms, I add a lot of expensive parts to the machine as well as all the documentation to facilitate the service of the chipper. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. Very easy access to the engine and other components thanks to the lifted hatch. The same applies to the operation, which is highly intuitive. A chipper for a very diverse demand: - Various types of wood waste - Carps, Carps - Zrzyny - Pallets - blocks, waste - hay, straw (after changing knives) - and many others Efficiency  ...

Technical data: with stand, 50 Hz, DAB ED 25% Engine: 3 Capacity: 1.75 A Capacity: 736 W Voltage: 380 V

Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

Vibration mill for iron-free ultra-fine grinding of slurries (70 - 78 % solids content), grinding chamber lined with rubber, 22 kW drive. Input size: Up to 5 mm; end fineness: < 4 micron. Used grinding media: 7,5 to. cylpebs, 20 mm x 20 mm (not included in scope of supply).

Verpackungskodierer Manufacturer: Willett Type: 3170 For the product eco-labelling, coding of packaging and cardboard boxes. In good condition!

32 solid single flails

grinding length:500 mm centre height:200 mm total power requirement:7 kW weight of the machine ca.:7 t

Tank press, Willmes Power: 6,000 liters Dimensions: approx. LxWxH: 5050x2230x2930 mm

Tank press, Willmes Power: 2,300 liters Dimensions: approx. LxWxH: 3600x2000x2100 mm

ID TR235 Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of sell ...

Equipped with 24-way tool change magazine; including cooling and filter installation

Equipped with 24-way tool change magazine; including cooling and filter installation

x-axis stroke 490 mm axle stroke Y150 mm axle stroke Z 140 mm spindle cone EX 32 / 25 Spindle speed 500-12,000 rpm Total installed power 5 KVa WEIGHT 1800 kg CNC NUM 720

Dimensions of the funnel LxWxH 965x700x340mm.

Equipped with 24-way tool change magazine; including cooling and filter installation

With documentation, the machine was only in operation for a few hours, has adjustable shoulders and matching format parts, an on-site inspection is possible.

Willi Maschinenbau P-350 Inclined flow wrapping machine

Builder: WILLIBALD Model: MINISHARK Engine: PERKINS 130 kW (175 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2015 Hourly Production: 35 m³/h Shredding System: 22 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 8.000 kg

Machine Details Stock-No. 1105-03837 Type of machine Machining Center - Vertical Make WILLEMIN MACODEL Type 408 S Year of manufacture 2000 Type of control CNC Storage location HAGUENAU FRANCE Country of origin SUISSE Delivery time immediately Freight basis ex Site Technical details x-travel 250 mm Y-Travel 200 mm Z-Travel 300 mm control FANUC 16 I MB A-Axis -30° - +100° C-Axis 360° table load 200 kg Rapid traverse 20000 m/min turning speeds 35 - 30,000 rpm tool taper HSK E40 power capacity - milling spindle 15/10 kW Tool piece magazine with 92pos. tool diameter 80 mm Tool-Dia with Free Toolbox 95 mm tool length 200 mm tool weight 8 kg Tool Changing Time 3.6 sec total power requirement 35 kW weight of the machine approx. 2.5 t dimensions of the machine approx. 2.0 x 2.1 x 2.65 m Accessories Chip conveyor Coolant system electr. Hand Wheel Coolant ...

Stainless steel container 1000 l Manufacturer: Willi Lermer Wiesbaden Volume 1000 l stackable 10 pcs available Very good condition, straight from production!

• For printing and dispensing self-adhesive labels • For labelling flat products (cartons) with swivel arm for front labelling • Label width max. 175 mm, height 110 • Thermal transfer printer Zebra 110 PAX4 for printing barcodes or alphanumeric codes • PLC Siemens S7-300 • System for use on conveyor belts or case packers

Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation -Dimensions: 305/210 / H110 mm -Weight: 4.2 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston rod: Ø 25 mm -Stroke: 100 mm -Dimensions: 95/95/H310 mm -Weight: 6.1 kg

Key data: 220 mm, 340 mm, 1500 mm

Lathe with removable bed

Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!

General SKU051U324 LocationBarneveld MakeWilliam Boulton TypeModel 48/2/ST/BT- MKII No.4204 Year of construction1999 Main Features MaterialStainless steel Surface1 m2 Sizes diameter1150 mm Specified Features - Vibro sieve Vibro sieveVibro-Energy separator (1x) Sieve surface1,0 M2 Number of sieve decks:2 Sieve sizesdia. 1150mm Outlet2x dia. 145mm + 1x dia. 195mm Motor3,75 KW, 380-420 Volt Sieve perforationdeck 1= 5,5mm, deck 2= 1,96mm With ball cleaning(lower deck) MaterialStainless steel 1.4301 (304) Information Floor space1,3x1,2 M Total height1,2 M Extra Specifications- Upper deck perforated screen plate, lower deck woven wire mesh with anti- blinding ball tray. Integral air & water spray system Minerals & inorganicPlastic & rubberPlastic & polymersSolid pharmaceuticsOther feedRubberAnimal feedOther chemicalStarchSugarOrganicsOther pharmaceuticsGeneric medicine ...

General SKU051U325 LocationBarneveld MakeWilliam Boulton TypeModel 48/2/ST/BT- MKII No.4205 Year of construction1999 Main Features MaterialStainless steel Surface1 m2 Sizes diameter1150 mm Specified Features - Vibro sieve MaterialStainless steel 1.4301 (304) Vibro sieve(1x) Sieve surface1,0 M2 Number of sieve decks:2 Sieve sizesdia. 1150mm Outlet2x dia. 145mm + 1x dia. 195mm Motor3,75 KW, 380-420 Volt Sieve perforationdek 1= 5,5mm, dek 2= 1,96mm With ball cleaning(lower deck) Information Floor space1,3x1,2 M Total height1,2 M Extra Specifications- Upper deck perforated screen plate, lower deck woven wire mesh with anti- blinding ball tray. Integral air & water spray system Minerals & inorganicPlastic & rubberPlastic & polymersSolid pharmaceuticsOther feedRubberAnimal feedOther chemicalStarchSugarOrganicsOther pharmaceuticsGeneric medicinesPowdered foodsConsumer w ...

Key data: 650 mm, 255 mm, 250 mm

Universal milling machine Wilhelm Grupp fab.Nr.: 605 Type: VKUP 104 x-travel: 650 mm Y-travel: 255 mm z-travel: 250 mm Spindle holder ISO: 40 / MK 4 Speed range: 45 - 2000 / 12 step rpm Headstock swivel +/-: 90° vertical = 90° right/left ° Swivel headstock +/-: 45° vertical = 90° right/left ° Feed:: (table) Table feed: X/Y: 16 - 132 mm/min Feed:: (table) Table feed: Z: 8 - 66 mm/min Clamping table: 1200 x 300 mm Total power requirement: 5.4 kW kW Machine weight approx.: 1.2 kg Machine dimensions approx. LxWxH: 1.6 x 2.0 x 2.0 m The spindle head can be swung out. The machine can be viewed at any time. Take a look at our other listings. Transport possible throughout Europe

Composed of: 2 Willmes tank presses TP 120, capacity: 120 hl - 1 machine, year of manufacture: 1980, completely renewed in 2013 - 1 machine, built in 1976, completely renewed in 2013 - New control system with automatic machine, touch screen and frequency converter (2013) - New pneumatic/electro-pneumatic equipment (2013) - Full sandblasting inside and new food-grade epoxy coating (2013) - Membranes in good condition - Air blower for low pressure and vacuum - On foot extensions - Stairs and walkways made of galvanized steel - Machines in very good condition

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

Lobe pump head,stainless steel,Willi F. Grassel type 200 NDA

Willy Niklas Beizer W.N: 20; complete with scales, pumps, pre-tanks, control cabinet etc.

Y1 / Y2 / X Lasersafe security Cadman Express touchscreen control Amada upper tooling as standard Willa upper adaptorclamps included as option Lower flattening die Capacity: 200 ton x 4100 mm Backgauge: CNC Control: Cadman Express Electric motor (power): 23 kW Length: 5100 mm Depth: 1900 mm Height: 2850 mm Weight: 12 ton

with Willa hydraulic clamping conical bending Capacity: 400 ton x 4300 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3800 mm Max stroke: 300 mm Max distance between table -- ram: 546 mm Depth of throat: 400 mm Locking speed: 90 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 37,5 kW Length: 4500 mm Depth: 2500 mm Height: 3858 mm Weight: 34 ton

8 axes Y1 /Y2 / X / X´ / R / Z1 / Z2 / V Easy-form angle measuring system T1 amp; T2 CNC controlled bending aids upper amp; lower hydraulic Willa tooling system Lazer safe protection Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Cadman B + Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 130 mm/sec Working speed: 12 mm/sec Returning speed: 115 mm/sec Electric motor (power): 15 kW

8 axes: Y1 / Y2 / X / X´ / Z1 / Z2 /nbsp; R / V Willa tooling (upper and lower) hydraulic Easyform angle measuring system 2 movable plate supports lazer safe security Capacity: 170 ton x 3100 mm Backgauge: CNC Control: Cadman Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 150 mm Locking speed: 100 mm/sec Working speed: 13 mm/sec Returning speed: 130 mm/sec Electric motor (power): 27 kW Length: 4945 mm Depth: 2525 mm Height: 3200 mm Weight: 11 ton

Scope WTE 35 hot runner control unit – multiple unit with 5 plug-in controllers And plug-in connection cables (optional) – see pictures Tested and cleaned under control conditions (hotrunner use) – all controllers OK – as of 18.7.23 Price (without cable) € 1550.-- & VAT .- exWorks Price (with cable) € 1750,-- & VAT .- exWorks Disclaimer: Sale only to commercial customers. The device described here is a used device. A function check has currently been carried out / tested and cleaned under control conditions (hotrunner use) - all controllers OK - as of 18.7.23! The sale is made to the exclusion of any warranty, guarantee, UVV, TÜV, etc. The seller excludes any liability for material defects. Inspection of the used device is possible by appointment - please send appointment requests by e-mail to: infohausmann-gbr.de A return of the purchased device i ...

Hydraulic power unit WILLY VOGEL 2 M 25/BEWIS Motor 1,25 KW 220/380 V used, tested ! Dimensions: 500 x 200 x 450 mm

Laser Granulometer, Particle Size Analyzer WAB, Willy A. BACHOFEN MASCHINENFABRIK CILAS Type 1064 Particle size: 0,,04 - 500 μm Current consumption: 2 / 1 A Operating voltage: 110 - 120 / 220 - 240 V 1AC 60 / 50 Hz used, tested ! Dimensions: 840 x 580 x 470 mm

8 axes: Y1 / Y2 / X / R / Z1 / Z2 / X´ / V with Easy Form with CNC bombation with Lazer Safe protection with Willa hydraulic clamping with 2 plate supports Capacity: 220 ton x 4200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 350 mm Max distance between table -- ram: 585 mm Depth of throat: 405 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 20 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Length: 6320 mm Depth: 2850 mm Height: 3600 mm Weight: 16,5 ton

Wire reel, willow wire reel, barbed wire winder, wire winder, wire winding machine, Electric fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -the device could with corresponding recording with front loader or Three-point hitch can be used -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

3 axes: Y1 / Y2 / X touchscreen control Willa upper tooling Capacity: 40 ton x 2050 mm Backgauge: CNC Control: TS Passage between uprights: 2050 mm Max stroke: 115 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 13,5 kW Length: 2900 mm Depth: 1850 mm Height: 2620 mm Weight: 3150 kg

Dont miss this exceptional opportunity! We offer for sale a Smipack machine in impeccable condition, with less than a month of use. This equipment is in perfect condition and is ready to be the ideal solution for your packaging needs. Featured Features: Impeccable Condition: The Smipack machine is in perfect condition, with less than a month of use. It is practically new and ready to be used immediately. Cutting-edge Technology: The Smipack brand is recognized for its quality and cutting-edge technology in the world of packaging. This machine offers exceptional performance and efficiency in the packaging process. Diversity of Applications: Ideal for a variety of applications, this Smipack machine is versatile and adapts to different types of products and packaging sizes. Whether for the food, pharmaceutical or any other sector, this machine adjusts to your needs. Up-to-date Main ...