We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,786 used machines on RESALE, but how to find them? Machine Search
used
Manufacturer: Giradina, Type: Dualtech, Year: 2007, Control: Programm, Spraying heads - total: 4, Working width mm: 1350, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Einlaufband: yes, Feeding speed m/min: 2,5-7,5, Wight approx. kg: 6000, Year :2007
used
Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,
used
Hersteller : Nordfab, Diameter intake mm: 300 mm, Engine power kW: 5,5 / 6,4 kW, rotations rpm: 1435 / 1735 , Direkt drive: yes, Wight approx. kg: 150,
used
Manufacturer: Biesse, Type: Tornado S 1300, Year: 1998, Control: Progrann, Work piece length max mm: 3000, Work piece length min mm: 300, Werkstückbreite max mm: 1300, Number of stacks: 2, Taktleistung ca.: 12, Compressed air bar: 6, Total power kW: 20, Number of sucking lines: 2, Feeding speed max m/min: 25, Feeding speed continous adjustable: yes, Erection in a pit: no, Wight approx. kg: 6000, Year :1998
used
Manufacturer: Hymmen, Type: TLX-M, Year: 1991, Control: yes, Operating side: rechts, Arbeitshöhe: 850, Stain roller: yes, UV-laquer roller: yes, Widht of roller coater: 1350, Widht of metering roller: yes, Attachment bracket roller: yes, Reverseantrieb: yes, Rakeleinrichtung: yes, Werkstückdicke max mm: 80, Work piece length min mm: 250, Feeding speed min/max: 6 - 40, Roller lift out: yes, Hight adjustment by engine: yes, Transportart: Band, Pump system: yes, Compressed air bar: 6, Wight approx. kg: 2000, Required space L x W x H mm: 940 x 2350 x 1600, Year :1991
used
Manufacturer: Gubisch, Type: ES 2000, Year: 1991, Control: Hand, Trimming saw: yes, Durchmesser Säge: 400, Saw kW: 3, rotations controlled: 2800, Working hight mm: 120, Vertikal spindle: yes, Working range Z-axis mm: 300, Length lifting spindle mm: 300, Diameter of the spindle mm: 50, Travels of spindle: 2 x100 mm, Milling spindle kW: 50, rotations controlled: 2800, Working stations: 1, Angular adjustment horizontally: yes, Work piece hight max mm: 120, Hauptmotor kW : 7,5, Wight approx. kg: 2000, Vorschub Stufenlos: yes, Mitre Window: yes, Year :1991
used
Manufacturer: Finnrose, Year: 1980, Total hight mm: 940, Adjustable: yes, Rollenteilung mm: ca.150, Rollendurchmesser: 80, Length mm: 2600, Width total mm: 1600, Drive power kW: 0,75, Wight approx. kg: 400, Year :1980
used
Manufacturer: Hess, Type: Kantenpresse, Working length mm: 2500, Working widht mm: 2000, Carriage: yes, Pneumatik: yes, Cylinder: 80, Wight approx. kg: 300,
used
Manufacturer: Hess, Bauyeshr : 1997, Hydraulical/pneumatical: hydraulisch, Press length mm: 3800, Press hight mm: 2900, Machine rigging: hand, Wight approx. kg: 4000, Year :1997
used
Manufacturer: Framar, Bauyeshr : 1992, Control: hand, Work stations: 1, Vertikal moulding unit: yes, Motor Kw: 3, Travel top to down mm: 120, Travel longitudinal mm: 275, Max door width mm: 1000, Max. mortise hole dimensions L X W X D mm: 20 X 75 X 110, Min. mortise hole dimensions L X W X D mm: 2 X 20 X 35, Automatic clamping system: yes, Incl. stopper system: yes, Trench deepth max mm: 110, Lifting device: yes, Wight approx. kg: 900, Year :1992
used
Manufacturer: Kleistronik, Type: KT 96000 Funiermessanlage, Year: 2005, Programm: Auswertungssoftware für Funierpakete, Funierparketvermessung: yes, Barcodedrucker: yes, Einlaufband: yes, Scanner: yes, Auslaufband : yes, Feeding speed m/min: 60, Software Auswertung: yes, Flächenermittlung: yes, Schnittstelle SAP: yes, Wight approx. kg: 500, Year :2005
used
Manufacturer: Hess, Type: Kantenbügelpresse, Year: ca.1990, Pre-warming of massive edges and heating rod: 2, Working length mm: 4000, Working widht mm: 60, Carriage: yes, Tiltable design: yes, Pneumatik: yes, Cylinder: 8, Wight approx. kg: 300, Year :ca.1990
used
Manufacturer: Venyeskob, Type: HGS, Year: 1983, Control: automatisch, Spraying heads - total: 4, Working width mm: 800, work piece cleaning: yes, work piece detection: yes, Conveyour system: Stahlband, Spraying stations: 1, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Water cleaning: yes, Dry exhauster: yes, Wight approx. kg: 2000, Year :1983
used
Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...
used
Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988
used
Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998
used
Manufacturer: Transportbandkurve unbekannnt, Control: no, Belt transport: yes, Working hight mm: ca 450 mm, Engine power kW: ca.0.75, Wight approx. kg: 600,
used
Manufacturer: Koch, Type: DL 80, Year: 1982, Control: Elektrisch, Work bays: 1, Work piece thickness mm: 40, Werkstücklänge mm: 180-2500, Work piece depth mm: 800, Work piece thickness mm: 40, Feeding speed m/min: 60, Mittenunterstützung: yes, Lochraster: 32, Beleimwerkzeuge: 12, Dovel insertion: yes, Work piece clamping: pneumatisch, Work stations: 1, Wight approx. kg: 3000, Year :1982
used
Manufacturer: Reimelt/Henschel, Type: FM L 30 / KM 85, Year: 2008, Wight approx. kg: 900 kg, Year :2008
used
Manufacturer: Soenen, Type: SHCR, Year: 1996, Winkelschweissungen im Bereich von min-max Grad: verstellbar, Mit Schweissraupenbegrenzung an Tisch- und Spannplatten: yes, Spannhöhe min-max mm: 30-90, Kämpfer schweissen im Stumpfschweissverfahren: yes, Spannhöhe min-max mm: 30-90, Spannzylinder pneumatisch: yes, Schweissspiegel und Profilanschlag kommen von unten: yes, Einstellbare Schweissraupenbegrenzung: yes, Ausricht-, Abschmelz- und Stauchanschläge: yes, Digitale Anzeige der Schweisstemperatur: yes, Wight approx. kg: 500, Year :1996
used
Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,
used
Manufacturer: Laweco, Type: Hubtisch, Year: 1993, Lifting power kg: 1.000, Length mm: 3.100, Width mm: 1.000, Lifting hight approx. mm: ca 1.500, Total hight mm: ca 500, built-on roller conveyor: yes, Wight approx. kg: ca 1800, Year :1993
used
Manufacturer: Biesse, Type: Beta, Year: 1984, Control: Elektrisch, Work bays: 1, Working length max mm: 3200, Working lenght min mm: 180, Dovel diameter mm: 8, Dovel lenght mm: 30, Number of doveling tools: 7, Lochraster: 32, Dovel insertion: yes, Work piece clamping: yes, Pneumatic clamping: yes, Work stations: 1, Wight approx. kg: 2500, Year :1984
used
pressure: 1600 t stroke: 300 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1200 mm ram surface: 1320 x 1180 mm ram strokes: 75 Hub/min Shut Height: 800 mm main drive: 132 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t Slide Knockout - 1st stage: 5 ton - 2, 3, 4 stage:15 ton each - Knockout Stroke: 40 mm Bottom Knockout - 1st & 4th stage: 5 ton - 2nd & 3rd stage: 20 ton - Stroke: 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991
used
Manufacturer: Scheer, Type: DB 10, Control: Hand, Drilling beam swivel-mounted: yes, Number of drill spindles: 3, Working length mm: 2200, Lochraster: 22,5, Drilling engine kW: 0,75, Working range max mm: 65, Work piece clamping: pneumatisch, Work stations: 2, Wight approx. kg: 400,
used
pressure: 2500 t stroke: 360 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1400 mm ram surface: 1400 x 1400 mm ram strokes: 70 Hub/min Shut Height: 1000 mm main drive: 190 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t 2500 ton Sumitomo hot forging press together with a 150 ton Komatsu OBS press - Model: OBS-150 - Capacity: 150 ton - Stroke: 200 mm - SPM: 256 - 50 - Slide Plate: 700 x 650 mm - Bed: 1250 x 780 mm - Die Height: 420 mm - Adjust: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2007, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, Thread heating: yes, Total power kW: yes, Wight approx. kg: ca.10, Required space L x W x H mm: 1500, Year :2007
used
Manufacturer: MAW, Year: ca.1990, One or two Spot machine: Einzelplatz, Hinges inserting unit: yes, Magazin for hinges!: yes, Working range X: 1500, Working range Y-axis: 800, Number of units: 1, Clamping system: yes, Wight approx. kg: 400, FREE TEXT: mit Luftkissentisch Anschlagsystem, Year :ca.1990
used
Manufacturer: Fischer Rückle, Type: FZK, Year: 1998, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, White glue connection: yes, Blue cooling: yes, Total power kW: ca.10, Wight approx. kg: 1500, Year :1998
used
x-travel: 560 mm y-travel: 430 mm z-travel: 510 mm table:: 900 x 430 mm : 500 Kg control: MAZATROL Smooth C : 12000 U/min/rpm spindle motor: kW : 30 pos. total power requirement: 42,5 kW total wight: 4,8 t dimensions of the machine ca.: 2,8 x 2 x 2,6 m - CNC Control Mazatrol SmoothC - 4th Axis -- A-Axis (1° index) - Auto toollength Touch probe - ATC 30-fold (BT 40) - Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Number of axles: 3 St. length: Ladefläche 10200 m total wight: 30.000 t axis load in front: 10.000 t axis load in the back: 20.000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Folding tap pointer: . tube diameter: 5 - 20 mm tag length: 50 - 100 mm total wight: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
total wight: 5675 t axial load -forward: 2450 kg axial load - rear: 3750 kg output: 45 kw serial number: KMTWA112P79H60576 lifting capacity: 2,5 Tonnen : 30 % : einen Number of working hours: 2900 h blower power: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.