129,247 used machines on RESALE, but how to find them? Machine Search
DREHER GRANULATOR, Mod. S26 - 41 GF, 410 mm rotor width, 260 mm rotor Ø, 11 kw drive (or lower), control panel, Average throughput rate 250 kg/h, Machine offered totally reconditioned, Suitable to reuse self-produced plastic scraps, installed power - used power in work: about 60-65% : 11 kW, availability: 3 weeks, working width: 410 mm, options available: lower power, capacity: 250 kg/h, conditions: reconditioned with sworn appraisal
VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...
QTY 1 x used Berstorff AUMA Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's). Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).
Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm
Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.
The Hot Strip Mill at JFE Steel’s Keihin district stands as a testament to cutting-edge steel production technology, boasting the capability to manufacture Japan's widest hot-rolled steel strip. Commissioned in 1979, the mill has been continually upgraded throughout the years to maintain its competitive edge. Production ceased in September 2023, leaving behind a legacy of excellence. It features a Pair Cross Shift Mill for adaptive roll gap control to optimize thickness and shape. A key enhancement was the integration of a Sizing Press in 2009, which allows for variable strip widths while using slabs of constant width. This not only increases the productivity of the slab caster and reheating furnace upstream but also expands the range of products that can be manufactured efficiently. Capable of rolling slabs measuring up to 2,300 mm in width, with thicknesses ranging from 160 t ...
Tires, solid rubber tires, forklift tires -Manufacturer: Kumaneko, solid rubber tires, 2 pieces with rim -Type: Widewall -Tire size: 27x10-12 -Bolt circle: Ø 220 x 27 mm -Recess: Ø 160 mm -Price/Sale: complete -Dimensions: Ø 600 x 255 mm/pc. -Total weight: 158 kg
Overview This 5 Gallon Water Bottling filler was built in 2003 with proven technology by American manufacturer Steelhead. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 600 bph
Name: RYOBI 756 P Wide + LX ID PP-51060 Category 6-Colors Manufacturer Ryobi Model 756 P Wide + LX Year 2008 Color 6 Impression 45 Working Hours - Speed-- Max. size 60 × 78 cm Min. Size - Condition Good Location Europe Availability Immediately Description • 6 colors and varnish • Extended Delivery • Chamber Duct System: Harris + Bruno • Ink Remote Control: PCS-G • Combi Cooling Unit: ConTemp • Automatic Plate Change: SAPC • Inking Unit Temperature Control (Inking roller cooling) • Automatic Register Control • Automatic Wash-up System • Antistatic system • Grafix Digital 3000 IR Dryer
VISION WIDE SF-2116 CNC PORTAL MILLING MACHINE Year of construction 2016 Fanuc 31i ModelB Table : 2000 X 1500 mm X-axis travel 2000 mm Y-axis travel 1500 mm Z-axis travel 800 mm Engine power: 44 kW With tool changer Total weight : 20t approx. Horizontal Head 90 Degree
WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.
HOT MICROPERFORATOR, Maximum working width 1.200 mm, Total roll width 1.300 mm., Maximum working speed 80 mt./min, Inner Ø 118 mm., Fitted with n.12 x 100 mm.bronze needle holding pieces, Nr.9 needles/sqcm, needle Ø 1,42 mm. (or bespoke to project),, 380 V 3Ph+N+E 50 Hz., Electric panel with digital thermometer to pre-set the working temperature, You can select the temperature on the different heaters (central and side), Pneumatic system to open/close the perforating roll., Roll rotation when in stand-by posittion, to avoid material overheating, Easy replacimg counter-roll in organic bristle., Micro-metric adjustment of needles pressure in work, The needle-holding roll can be very easily replaced to a different needle pattern., conditions: new machine, type: Hot microperforator for plastic films
Woodmizer log band saw, built in 2022, incl. pre-cutter, electric height adjustment, electr. Feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kgPrices subject to change, errors, printing and typesetting errors excepted
This 3-axis Vision Wide SE-2112 CNC milling machine was manufactured in 2018. Ideal for precision milling, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Vision Wide SE-2112 machine we have for sale. Contact us for more information.
max. format 60 x 78 cm Year of construction 2008 PCS-G color remote control PDS-E Quality Control Ryobimatic Film Dampening Units Technotrans cooling unit RPC Semi-Automatic Plate Changing Automatic washing equipment Ultrasonic double sheet control Electrifying device Dry pollinator Grafix Digital Powder suction Stack delivery Reading totalizer: approx. 93 million pressure
FOOD CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -one side coated underside of fabric with additional wedge bar, (11 mm wide x 8 mm high) in the Middle -endless -Food safe, white -Dimensions: 5,100 mm x 300 mm width x thickness length approx. 1.2 mm, surface with tunnels. -Tunnel approx. 20 mm in height, distance approx. 300 mm, tunnel length 245 mm, studs tip inclined (see photo) On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible)
FOOD conveyor belt from the manufacturer IN PREMIUM quality + large stock! -Stable conveyor belt / conveyor belt made of PVC for many purposes, especially for the food industry, with 2 tissue deposits, coated on both sides run page from PVC diamonds profile (rollers band), oil - and grease-resistant! -New, endless welded, in blue (white also available) -Dimensions: 12.330 mm x 400 mm width x thickness 3.2 mm -Special price! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Hook connection on request. Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More belts, drive belt and flat belt in all other sizes available immediately . We ship worldwide we deliver worldwide, please ask for shipping costs! BELTe ...
CONVEYOR BELT / CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! For many applications in industry, agriculture and for woodchips. On request we manufacture the conveyors / conveyor belts to your individual measurements. (All lengths, widths and designs possible) Available also with pimples, studs or textured surfaces. We ship worldwide we deliver worldwide, please ask for shipping costs!
Used belt chiller for vegetables CABINPLANT”. Worked on peas. Overall dimensions: - Total length - 6.550 mm; - Total width - 2,320 mm; - Total height - 2,300 mm. Technical data: Auger that distributes product evenly on the belt: - Working length of the belt - 6,200 mm; - Working width of the belt - 1,850 mm; 6 product cooling spray sections; 6 pumps feeding the cooling section - each pump - 0.55 kW motor - 1,395 U/min. Circulation pump - 0.55 kW - 1,395 U/min Modular-polyethylene belt: - Belt length - 5,250 mm; - Belt width - 465 mm; Belt drive - speed transmission - motor - 0.37 kW - 1,235 U/min; Shorts tank; The machine additionally equipped with a CIP washing and rinsing system. All made of stainless steel.
approx. 3x belt curves, VanRiet, 45 degrees, driven – used - Price per piece ex location (net): 1.450.-€ (net)incl. loading Manufacturer: VanRiet Type: Belt Conveyor Curve Year of Make: 2017 Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony
Min. 4x belt curves, VanRiet, 90 degrees, driven - used - Price per piece ex location (net): incl. loading Manufacturer: VanRiet Type: Belt Conveyor Curve Year of Make: 2017 Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony No. 2 + 3 – 2.950.-€ (net) Element width: approx. 1.42m Belt width: approx. 1.20m Height incl. feet: approx. 61cm. Radius: outside / outside approx. 4.70m Voltage: 230/400 V, 50Hz, 4.75A, 3kW No. 21 + 23 – 2.950.-€ (net) Element width: approx. 1.42m Belt width: approx. 1.20m Height incl. feet: approx. 61cm. Radius inside / inside approx. 2.20m Voltage: 230/400 V, 50Hz, 4.75A, 3kW
Height-adjustable powered roller conveyor, suitable for pallets and other large packages. The conveyor belt can be adjusted in height and is driven by two motors to distribute the load evenly. See the last image for all dimensions of the conveyor. - complete solidworks and STEP- files available - The powered roller conveyor is divided into two sections, and the division of these sections can be adjusted as needed. - The machine has been used in combination with a bag in box filler. The roller conveyor has been lightly used but is in good and working condition. Please contact for more infromation.
Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width
CONVEYOR BELTS, for waste material and more, sturdy steel structure, constructed in a workman like manner, Italian quality and components, can be lined in PVC, RUBBER or SHUTTER TYPE BARS, Can be prepared and fitted for METAL DETECTORS, and completed with OVERBELT METAL SEPARATORS, Size and characteristics bespoke to the project., Just fill your enquiry with the following data:, - Materials to be transported (photos appreciated), - Quantity in Tons/h, - required working width, - total length, - horizontal length, - diagonal length, - heigh of discharging point, - if prepared for metal detecto, - if fitted with metal detector (in this case, please add maximum contamination size), - if positioned in covered/uncovered place, We will send you a most targeted offer.
General SKU204U051 LocationBarneveld MakeSollich TypeKK 420 Spezial No.0628 Year of construction09/1998 Main Features MaterialStainless steel Length6000 mm Width600 mm Specified Features - Belt cooler Cooling beltcheck Belt can be cooledcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck Total height1.14 m Weight2000 kg CEcheck Floorspace5,32x0,99 m Extra SpecificationsWithout belt, without control, incomplete this beltcooler was part of a SKU 204U1442 ( sollich FKW-s 15 chiller) Belt coolersSollichBelt coolers > Belt coolersBrand > Sollich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU204U035 LocationBarneveld MakeSollich TypeKK 420 No.0618 Year of construction07/1997 Main Features MaterialStainless steel Length6000 mm Width600 mm Specified Features - Belt cooler Cooling beltcheck Belt width600 mm Belt length6000 mm With motorcheck Belt can be cooledcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck With switchcheck Weight2000 kg CEcheck Floorspace6,0 x 1,60 m Total height1,2 m Extra SpecificationsWithout belt, without control, incomplete Belt coolersSollichBelt coolers > Belt coolersBrand > Sollich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU250X201 LocationBarneveld MakeGeppert-band TypeGAL-60 Mach.No.1308014 Main Features Motor0.18 KW Length2600 mm Width640 mm Specified Features - Conveyor belt MaterialPTFE (Teflon) Conveyor beltcheck Belt width640 mm Belt length2600 mm With side guidescheck With motor0,18 kW, 220-240 volt, 1360 rpm With variable speed drivecheck Information Year of construction2012 Mounted on framecheck CEcheck Floorspace2,70x1,00 m Total height2,80 mConveyor beltsGeppert-Band GmbHConveying systems > Conveyor beltsBrand > Geppert-Band GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU312W1579 LocationBarneveld MakeAnlagenbau Stampfer GmbH TypeAS-WRB-1000 Mach.No.144.0002 Main Features Motor2.2 KW Length4829 mm Width1637 mm Specified Features - Conveyor belt MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 11,466 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm Information Year of construction2014 Total height1,0 m CEcheck Floorspace11,4x1,6 m Weight5500 kg Extra Specificationsbelt rolls HDPEConveyor beltsStampfer HaanConveying systems > Conveyor beltsBrand > Stampfer Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...
General SKU312W1580 LocationBarneveld MakeAnlagenbau Stampfer GmbH TypeAS-RB-1000 Year of construction2014 Main Features Motor2.2 KW Length4829 mm Width1637 mm Specified Features - Conveyor belt MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 4,829 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm Information Floorspace4,8x1,6 m CEcheck Total height1,0 m Weight1479 kg Extra Specificationsbelt rolls HDPEConveyor beltsStampfer HaanConveying systems > Conveyor beltsBrand > Stampfer Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU409X1232 LocationBarneveld MakeBeltron TypeUV-Trockner BE 20 / 120 W / II No.0130128 Year of construction2018 Dimensions Belt width220 mm Belt length1050 mm Information Mounted on mild steel framecheck and wheels With switchcheck Weight150 kg CEcheck Floorspace1,10x1,10 m Total height1,37 m Extra SpecificationsType: :UV continuous conveyor dryer Lamp type: :2 × medium-pressure mercury lamps Lamp power: :Max. 120 W/cm Conveyor speed: :0.5 – 12 m/min (variable) (motor: 5 kW) Adjustable lamp height: :20 – 150 mm Cooling: :Forced-air, central exhaust fan Operating temperature: :19 – 23 °C Exhaust connection: :To outdoor vent, max. 7 m duct Additional information: Siemens touchscreen control, type :Simatic HMI Exhaust fan: :0.14 kW, :2550 rpm, airflow :10.1 m³/minBelt dryersBeltron GmbHDryers > Belt dryersBrand > Beltron GmbH What you can ex ...
CHAIN NEXTRACTION BELT, 4.370 mm long, 5,5 kW motor, Spaggiari gearbox With central chain transport and paddles Flat type on supports Stainless steel structure, n.4 F218 bearings Construction year 2013 510 mm.outer width 410 mm.inside width, installed power - used power in work: about 60-65% : 5,5 kW, working width: 410 mm., conditions: checked
General SKU312W1494 LocationBarneveld CEcheck MakeAnlagenbau Stampfer GmbH Main Features Motor2.2 KW Length11466 mm Width1637 mm Specified Features - Conveyor belt MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 11,466 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm Information TypeAS-WRB-1000 Mach.No.144.0001 Year of construction2014 Floorspace11,4x1,6 m Total height1,0 m Weight5500 kg Extra Specificationsbelt rolls HDPEConveyor beltsStampfer HaanConveying systems > Conveyor beltsBrand > Stampfer Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...
General SKU250X202 MakeMuskopak Year of construction1991 Mounted on framecheck Main Features Motor0.2 KW Length3700 mm Width220 mm Specified Features - Conveyor belt Elevator beltcheck Belt width220 Belt length3700 With carrierscheck With side guidescheck With motor0,20 kW, 230 volt With variable speed drivecheck With frequency controllercheck Outlet height2900 mm MaterialPTFE (Teflon) Information LocationBarneveld Floorspace2,80x1,60 m Total height3,0 mConveyor beltsMuskopak/IntropackConveying systems > Conveyor beltsBrand > Muskopak/Intropack What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU250X450 LocationBarneveld Main Features Motor0.75 KW Length3500 mm Width330 mm Specified Features - Conveyor belt MaterialPTFE (Teflon) Elevator beltcheck Belt width330 Belt length3500 With carrierscheck Carrier height600 mm Centre to centre carriers180 mm With side guidescheck With motorcheck With frequency controllercheck Outlet height2450 mm Information MakeIntropak Year of constructionUnknown Mounted on wheelscheck With switchcheck Floorspace1,32x3,0 m Total height2,80 m Weight190kgConveyor beltsMuskopak/IntropackConveying systems > Conveyor beltsBrand > Muskopak/Intropack What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...
General SKU409X1233 LocationBarneveld CEcheck MakeBeltron TypeUV-Trockner BE 20 / 120 W / II Dimensions Belt width220 mm Belt length1050 mm Information No.0580122 Year of construction2022 Mounted on mild steel framecheck on wheels With switchcheck Floorspace1,10x1,10 m Total height1,25 m Weight150 kg Extra SpecificationsType: UV continuous conveyor dryer Lamp type: 2 × medium-pressure mercury lamps Lamp power: Max. 120 W/cm Conveyor speed: 0.5 – 12 m/min (variable) (motor: 5 kW) Adjustable lamp height: 20 – 150 mm Cooling: Forced-air, central exhaust fan Operating temperature: 19 – 23 °C Exhaust connection: To outdoor vent, max. 7 m duct Additional information: Siemens touchscreen control, type Simatic HMI Exhaust fan: 0.14 kW, 2550 rpm, airflow 10.1 m³/min Belt dryersBeltron GmbHDryers > Belt dryersBrand > Beltron GmbH What you can expect from Foeth: -- Mach ...
General SKU271X310 MakeLiftVrac Mach.No.1401 Year of construction2014 Main Features Motor1.5 KW Length6000 mm Width350 mm Specified Features - Conveyor belt MaterialStainless steel Elevator beltcheck Trough type conveyor beltcheck Belt width350 mm Belt length6000 mm With motor1,5 kW, 380-415 volt, 1485 volt With variable speed drivecheck Belt speed57 rpm Outlet height1600 mm Information LocationBarneveld Inclined on framecheck Mounted on wheelscheck With switchcheck Floorspace6,20x1,50 m Total height2,40 m Weight700 kg CEcheckConveyor beltsLift VracConveying systems > Conveyor beltsBrand > Lift Vrac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...
General SKU256N198 LocationBarneveld CEcheck MakeGMF GOUDA TypeDisc Pastillator DP20/2 Main Features MaterialStainless steel/Coated Specified Features - Belt cooler Cooling beltø 2000 mm rotating discs (2x) With motor1,5 kW Belt can be cooledcheck Feeding drop dosing devicecheck With scrapercheck Outletø 150 mm MaterialStainless steel Information No.DP 47-2-1 Year of construction1997 With switchcheck Floorspace6,6 x 3,3 m Total height3,3 m Weight6000 kgBelt coolersGMF GoudaBelt coolers > Belt coolersBrand > GMF Gouda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU294N388 LocationBarneveld MakeBHS Werk Sonthofen Dimensions Filter width80 cm Material Product contact materialStainless steel 1.4529 (926) Main Features MaterialStainless steel Motor15 KW Surface2.25 m2 Specified Features - Vacuum belt filter Vacuum belt filterEnclosed indexing vacuum belt fliter Filter surface2,25 m² Filter width800mm Number of sections:6 Without motor(pneumatic) Knife dischargecheck (knife blade not included) With vacuum pumptype PMMZF 3813 D3 Motor15 KW, 500 Volt With vacuum tankcheck MaterialStainless steel Information TypeBF 5 /4.5-KD Year of construction1997 Floorspace7,0 x 2,0 m Total height2,5 m Weight5000 kgVacuum belt filtersBHS SonthofenFilters > Vacuum belt filtersBrand > BHS Sonthofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...
General SKU230T250 MakeInodes Energie & Milieu (NL) LocationBarneveld CEcheck TypeTDLIG 92-4-522 Dimensions Belt width900 mm Belt length5000 mm Specified Features - Belt dryer MaterialStainless steel 1.4313, Stainless steel Information No.53/1324 Year of construction2000 With switchgearcheck(as is) Floorspace9000 x 1600 mm Total height2700 mm Weight7000 Kg Extra SpecificationsMax. temperature: 200°C Fuel: Natural gas Net fuel capacity 128 kW Fuel pressure 100 mbar Compressed air Belt dryersBrand > Inodes What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU201P106 MakePannevis solid liquid separation TypeRT, F1 No.1411 Year of construction1988 LocationBarneveld Material Product contact materialStainless steel 1.4571 (316Ti) Main Features MaterialStainless steel Motor0.25 KW Surface4 m2 Specified Features - Vacuum belt filter Vacuum belt filtercheck Filter surface4m2 Filter width960mm Filter length4200mm Number of sections:2 With motor0,25 KW, 380 Volt (Ex) With variable speed drivecheck Knife dischargecheck With liquid pumpcheck Motor0,75 KW (Ex) MaterialStainless steel Information Floorspace7,8x2,6 M Total height2,0 M Weight2700 KG ATEX compatiblecheck Extra SpecificationsIncluding 2x vacuum tank 500 Ltr :Vacuum belt filtersPannevisFilters > Vacuum belt filtersBrand > Pannevis What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...
General SKU315S527 LocationBarneveld CEcheck MakePannevis TypeRT 575 Main Features MaterialStainless steel Motor0.75 KW Surface1.5 m2 Specified Features - Vacuum belt filter Vacuum belt filtercheck Filter surface1,5 M2 Filter width550 mm Filter length2800 mm With motor0,75 kW 400/230 Volt With variable speed drivecheck Belt speed3.52-0.59 m/min. Knife dischargecheck MaterialStainless steel Information No.1747 Year of construction1996 Floorspace6,3 x 1,8 M Total height1,9 M Weight1700 KgVacuum belt filtersPannevisFilters > Vacuum belt filtersBrand > Pannevis What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt
General SKU431X1350 LocationBarneveld CEcheck MakeGeppert Band Conveying Systems Main Features Motor0.25 KW Length3800 mm Width140 mm Specified Features - Conveyor belt MaterialPlastic, Stainless steel Conveyor beltcheck Elevator beltcheck Belt width140 mm Belt length3800 mm With carrierscheck Carrier height100 mm With motor0,25 kW, 219-241/380-420 volt, (Ex) Belt speed137 rpm Outlet height1300 mm Information TypeGES-50-K-W Mach.No.1509113 Year of construction2015 Mounted on framecheck Inclined on framecheck Floorspace3,20 x 0,80 m Total height2,20 mConveyor beltsGeppert-Band GmbHConveying systems > Conveyor beltsBrand > Geppert-Band GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type Peflex ESF 3/1 A21 015 beige M1 FG -Product No.: 15-01737 item 513334 -Width: 50mm -Length: 20000mm -Thickness: 1mm -Number: 6x conveyor belt available -Price per piece -Transport dimension: Ø 170 x 50 mm -Weight: 0.9 kg/pc.
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type Peflex ESF 3/1 A21 015 beige M2 FG -Item: 513334 -Width: 50mm -Length: 50000 mm -Thickness: 1mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 240 x 50 mm -Weight: 1.9 kg/pc.
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type EM 8/2 0 045 transp -Product No.: 05-19775 Item No.: 512861N -Width: 100 mm -Length: 3900 mm -Thickness: 2 mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 155 x 100 mm -Weight: 0.9 kg/pc.
General SKU033H160 MakePannevis TypeRT 0,25 x 4,0 M Gastight No.1348 Year of construction1996 LocationBarneveld Dimensions Filter width25 cm Filter length400 cm Main Features MaterialHastelloy Motor11 KW Surface1 m2 Specified Features - Vacuum belt filter Vacuum belt filtercheck Filter surface1,0 m² Filter width250 mm Filter length4000 mm With motor0,75 KW, 400 Volt With variable speed drivecheck Knife dischargecheck With vacuum pumpcheck (2x), make Siemens and NASH Motor± 11,0 kW (Ex) With vacuum tankcheck With liquid pump(2x) make Bungartz (in Hastelloy C4) Motor4,6 kW + 1,85 kW MaterialStainless steel 1.4539 (904L), Stainless steel 2.4610 (Hastelloy C-4) Information With switchcheck With switchgearcheck Floorspace6,7 x 1,7 m (filter) Total height1,8 m Weight4500 kg Extra SpecificationsContact parts in Hastelloy C4 Remaining parts are stainless stee ...
maximum number of results exceeded
please refine your search
