wfl millturn used for sale

turning diameter:670 mm turning length:3000 mm control:840 z-axis:3150/3000 mm y-axis:-125/+175 mm x-axis:700/260 X+ mm c-axis:0,001 ° main gear-box motor:60/40 kW spindle turning speed range:2600/3300 U/min spindle diameter in front bearing:160 mm Spindle bore:115 mm lower slide:2 x 12, VDI 40 mm upper slide:25 kW no. of tools in the magazine:90 Stück workpiece length:900 mm tool taper:HSK 100 / VDI 40 rapid traverse::15/20 m/min total power requirement:140 kW weight of the machine ca.:35 t dimensions of the machine ca.:13 x 4,5 x 3,6 m CNC TURNMILL center with opposed spindles and 2 saddles, used for Alu operation only - SIEMENS 840 C control for 8 axis - Left/Right spindle with C-axis, KNCS 400 mm power chuck - Lower saddle with 2 x 12-fold revoving heads - Turning.- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW drive motor, 10-4000 r/min, B and Y axis - Coolant dev ...

turning diameter:670 mm turning length:3000 mm control:840 z-axis:3150/3000 Z+ mm x-axis:700/260 X+ mm b-axis:-110/+90 ° c-axis:0,001 ° main drive motor:60/40 kW spindle turning speed range:2600/3300 U/min spindle diameter in front bearing:160 mm spindle bore:115 mm lower slide:2 x 12, VDI 40 upper slide:25 KW no. of tools in the magazine:90 Stück wotkpiece diameter with 2 vacant positions:200 mm tool length - max.:900 mm tool taper:HSK 100/ VDI 40 rapid traverse::15/20 m/min weight of the machine ca.:35 t total power requirement:140 kW dimensions of the machine ca.:13 x 4,5 x 3,6 m CNC Turninig-Boring-Milling Center with opposed spindles and 2 saddles - SIEMENS 840 C safety integrated control for 8 axis - Left/Right spindle with C-axis, KNCS 400 mm power chucks - Lower saddle with 2 x 12-fold revolving heads - Turning,- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW ...

Turning diameter: 950 mm Turning length: 5370 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 4   CNC Brand: Siemens CNC Model: SIEMENS 840D Max. turning Ø:   950mm X-Axis:           900 (+860 and -40)mm Y-Axis:           500mm Z-Axis:           5370mm B Axis:           195 (+90 and -105)° Spindle bore:     165mm Speedrange:       1600Rpm Spindle power:    145kW B-Axis Toolsystem:Sandvik C8 B-Axis Speedranges:4000Rpm B-Axis power:     25kW Pinole taper:     6Mk Stroke pinole:    200mm Quill Ø:          180mm Length:           14500mm Width:            450 ...

Turning diameter: 550 mm Turning length: 2000 mm Turret positions: 20 CNC Brand: Siemens CNC Lathe with y-axisWFL Austria - M55 Max. turning Ø:   550mm X-Axis:           550mm Y-Axis:           500 (-130/+270)mm Z-Axis:           2000mm Spindle bore:     100mm Speedrange:       4000Rpm ATC / revolver:   20 B-Axis Toolsystem:sK40 B-Axis Speedranges:3000Rpm B-Axis power:     15kW Chip conveyor:    Yes Pinole taper:     5Mk Stroke pinole:    160mm Length:           7000mm Width:            5000mm Height:           3300mm Weight:           16000kg

Stock Number: 3781 CNC LATHE Manufacturer: WFL , Type: M 55 x 2000 Machine NO.: 085144/01, Year of manufacture: 1998 Specifications: Max. swing diameter 460 mm dia. Max. rotary. About Bed 640 mm Dia. Turning length 2000 mm Turning over canvas slide 550 mm dia. Main spindle din 55026 form A Main engine power 37 kw Main spindle speed range 18.5 - 3150 rpm C axis - main spindle movement 0.001 degree Y axis 300 (-130/+70 mm B Axis Motion 180 degree - 0.001 degree B axis spindle speed 1-3000 per/min B axis tool system ISO 40 - 24 Tools Tool turret 1 with 12 VDI 50 stations Accessories: Hydr. Chuck main spindle Forkardt FNC 250-65 mm dia Chip conveying. Cable tow Hydraulic tailstock. Hydr. Bezel Forkardt LZ 12-155 Length: 5700 mm Transport , Height: 3000 mm, Width: 2500 mm Transport , Weight: 15.000 kg

turning diameter: 800 mm turning length: 2.000 mm control: Sinumerik 840 D numbers of positions in the tool changer: 90 Tool bore: HSK A100 CNC Turning- and Milling Center | WFL - M65 equipped with a SIEMENS 840D control as well as B-axis and tool changer. B axis: - speed: 4.000 min-1 Additional equipment: - bezel - tailstock - 3D Renishaw probe - chip conveyor (new in 2019) The machine is in a very well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M 65 | M-65 | M65 x2000 | M 65 x 2000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

WSM Stationary screwdriving unit Screwdriving station Assembly station Automatic station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. 4.6.2 Functional sequence This station consists of 4 substations: St 4.1 Screw chassis: - optical inspection of the core hole position 6 - Positioning of the screwdriver by means of XY-Z servo axis port - 5x screwing from above St. 4.2 Mounting LW angle: - manual placement of the LW angle on the cycle belt handling - eject and position the LW angle by  ...

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa, thread cutting quick-change chuck MK3 -Intake: Type Bilz WFLK 115 MK 3 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 B 8x6.2 M 8 -Type: Bilz WES 1 B KP 6x4.9 M 8 -Total dimensions: 140/36/H140 mm -Weight: 0.9 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa thread cutting quick-change chuck MK2 -Intake: Type Bilz WFLK 115 MK 2 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 BK 4.5x3.4 M 4 -Type: Bilz WES 1 B 3.5x2.7 M 5 -Total dimensions: 140/35/H120 mm -Weight: 0.7 kg

x-travel: 800 mm y-travel: 630 mm z-travel: 550 mm control: TNC 640 Millturn Heidenhain Main spindle: turning speed range - main spindle: max. 12.000 U/min power capacity - main spindel: 7,5 - 22,5 kW max. Torque: 140 Nm tool taper: HSK-A 63 NC-Rotary table:: faceplate diameter: 280 mm T-slots: H7 x 50 measuring system: ECN 225 swivellable: +/-120 ° Torque: max. 180 Nm Holding Torque: 800 Nm max. table load: 320 kg turning speeds: 200 min/-1 Tool-Presetter:: numbers of positions in the tool changer: 40 max. tool diameter: 75 mm max. tool-dia with free toolbox: 160 mm max. tool length: 320 mm max. tool weight: 4 kg feed: rapid travel ( X / Y / Z ): 60 m/min total power requirement: 31 kVA weight of the machine ca.: 7,8 t dimensions of the machine ca.: 5,0 x 6,0 x 3,0 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: triple signal li ...

Description: Machine number: WFL 2248382 + WFL 2250409 max. pressure: 16 bar Delivery flow rate: 8,700 l/min Air connection: 1 1/2' , Approx. Onsite Dimension. (l x w x h): 350 x 150 x 620 mm, weight approx.: 12 kg

Description: Air flow rate: 18,000 l/min Machine number: WFL 2200504 + WFL 2292710 Max. pressure: 16 bar Air connection: 2 2/1' Approx. Onsite Dimension. (l x w x h): 450 x 170 x 780 mm, weight approx.: 22 kg