We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,318 used machines on RESALE, but how to find them? Machine Search
used
Protec development machine (wet) Optimax
used
Protec development machine (wet) Compact 35
used
Protec development machine (wet) Compact 35
used
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
used
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
new
Rubber flat cable 12x1,5, RHEYFLAT-N NGFLGOEU-J, Nexans, new 1 x 100m, 1x23m Special price As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. In dry, damp and wet rooms as well as outdoors as a flexible energy and control cable, under medium mechanical loads. The cables are intended for the connection of moving parts of machine tools, conveyor systems, cranes, etc. if the cables are only exposed to bending stresses in one plane. Veins grouped into groups, the individual groups are separated by a bridge.
used
x-travel: 750 mm y-travel: 300 mm workpiece height: 400 mm table surface area: 700 x 250 mm magnetic plate size: 650 x 250 mm grinding spindle speed: 2880 U/min adjustment of spindle-head: 530 mm table speed -stepless-: 5 - 25 m/min cross feed: 0,5 - 10 mm/Gang magnetic clamping plate: 750 x 250 mm table speeds: quer - 2 - 16 m/min distance table - lower edge bore head guide: 300 mm feed: Supprt - 0,5 -6 m/min vertical feed autom.: 0,002 - 0,4 mm control voltage: 24 V voltage: 380 V / 50 Hz grinding motor: 2,2 KW total power requirement: 3,6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 2,0 x 1,6 m hand adjustment of grinding table, automat. feed motion electric quick motion for elevation adjustment, wet grinding equipment, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
– German production – year of manufacture 1990 – for wet wood TECHNICAL PARAMETERS: planing width max. 310 mm planing height on both sides 300 mm planing height four-sided 100 mm spindle diameter 30 mm shaft motor power 2 x 11 kW spindle motor power 2 x 7.5 kW feed speed 14-86 m/min feed speed adjustable on the variator four upper pulling shafts two lower pulling shafts four rollers in the auxiliary countertop brake minimum element length 600 mm machine dimensions (L/W/H) 290 / 170 / 210 cm weight ~ 3500 kg
used
– German production –DTR – for wet wood – hydrohebel TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm rollers in the countertop pulling spindle diameter 1-4 - 40 mm spindle diameter 5-6 - 50 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW feed motor power 4 kW feed adjustable smoothly on the inverter 5-26 m/min jointers on the last two heads five upper steel pulling rollers four top rollers rubber pulling four rollers in the countertop pulling pneumatic pressure feed on cardan shafts electric brakes electric height adjustment length of the pre-worktop 1950 mm connection diameter 140 mm dimensions of the machine (L/W/H) 685 / 230 / 230 cm weight 4000 kg
used
Used Koppens forming, buttering and predusting line is a great solution for every production plant who is specialized in making meat burgers. The line consists of Koppens VM 600HD EasyFormer, Koppens ERT 600 wetcoater with mixer and Koppens Optiflour preduster. The complete line allows to form meat burgers and cover it with coating both wet and dry (flour/flour with spices) Belt width: 600mm Efficiency: up to 50 strokes/min
used
Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...
used
Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled ...
used
This machine is in an excellent condition. We can sale it as is or completely reconditioned. The machine has dust on top, but it is indoor, and it will be delivered like a new machine. We are experts in Decanters and Centrifuges with over 35 years of experience. Process liquid: Min. 0°C (32°F) - max. 100°C (212°F) Max. density of compact wet cake at max. bowl speed: 1.7 kg/dm Maximum main speed: 3075 Bowl length:2440 Bowl diameter: 575 mm Beach angle: 20 degrees Solids discharge type: 360°-type with 8 wear liners Bowl Material Duplex Bowl wear protection liner
used
grinding length: 1000 mm grinding width: 300 mm workpiece height: 230 mm table surface area: 1000 x 240 mm x-travel: 1000 mm y-travel: 270 mm z-travel: 350 mm grinding wheel diameter: 240 mm grinding spindle speed: 2180 U/min table speed -stepless-: 3 - 30 m/min total power requirement: 4,5 kW weight of the machine ca.: 2,8 t Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Four side planer Griggio G240 P/5U for wet Maximum planing width 240mm Maximum planing height 160mm Number of spindles 5 Spindle arrangement Bottom Rights Left Mountain Universal Drive: in the table Infinitely adjustable feed on the inverter Year 2007 Weight: 4060 CE Certificate Net price
new
Weighing unit with 14 weighing heads (springless hoppers) for very precise weigh checking, with 4.0-Liter volume each. Special design for wet environments and/or products or where a frequent washing of the machine is required (Salads, pet food, frozen food up to 150mm, non food, etc). - Specifications: max. speed of the machine in neutral: 80 cycles/minute | weighing range: 10-3000g, accuracy: +/- 0.5-2.0g | touchscreen (large version) operation | stainless steel | 220V, 2.5kW | L2106xW1466xH1758 | 800/850kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from ap ...
used
Mixers for dry and wet products On behalf of our customer, we can also offer you several baking carousels for the production of crêpes/pancakes of the manufacturer SDTN. If you are interested, we will be happy to send you photos and further information and, on request, the contact details of the seller. Net volume: 200 l Number of pumps: 2 pieces Pressure level: atmospheric Condition: functional, well-kept Availability: as of now Location: Belgium Price bids: are welcome Original price in 2017 (total): 30.000,00 €
new
Weighing unit with 10 weighing heads (springless hoppers) for very precise weigh checking, with 4.0-Liter volume each. Special design for wet environments and/or products or where a frequent washing of the machine is required (Salads, pet food, frozen food up to 150mm, non food, etc). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | weighing range: 10-3000g, accuracy: +/- 0.5-2.0g | touchscreen (large version) operation | stainless steel | 220V, 2.0kW | L1906xW1266xH1603 | 700/750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from ap ...
new
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 5kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.0mm | tunnel size WxH: 125x250mm | max. passing size WxH: 100x215mm | power: 220V/0.3kW, 50Hz/60Hz | dimensions and weight: L1627xW528xH1420mm, 110/210kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
new
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.5mm | tunnel size WxH: 450x250mm | max. passing size WxH: 410x210mm | power: 220V/0.45kW, 50Hz/60Hz | dimensions and weight: L1800xW800xH950mm, 180/280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
new
Sample system for filling wet coleslaws, sauerkraut, red cabbage into prefabricated bags including vacuuming of the bags. Rotary type volume dosing station with the special feature that the product is pressed into the bag by a piston cylinder. The filled bags are then transferred to the rotating vacuum and sealing station. 10 individual chamber vacuumers - particularly suitable for products containing high liquid - ensure an excellent vacuuming result. Thermal transfer printer and product infeed unit included. PLC controlled, operation via touch screen. Suitable for a wide range of pouches such as composite and single-layer aluminium, PE, BOPP and PP films, paper, etc. - Specifications: Filling range: 20-1000g | max. number of machine cycles in neutral: 80 cycles/min | bag dimensions: W(80-160)xL(80-240)mm | dimensions of the machine LxWxH: 2100x1400x1700mm. Please note: This is only a s ...
used
Eirich mixer granulator 3000 liter capacity Semi-mobile body with 4 hydraulic supports with low-bed low-loader transportable approx. 27 tonnes. Container drive 2 x 22 KW Whirler drive 160 KW Water and chemical dosing Mixer weighing Hydraulic unit Compressor Complete factory control for feeding and discharging conveyor belts Machine was used by us for the production of cat litter i.e. Various wet and dry components were weighed and then slowly homogenized and then granulated with different differential speeds to a stable granulate 1-5 mm. The system includes a complete control system.
used
Goebel OPTIFORMA 520 Year 1985 Size: Width 520mm Unwind 5 printing units wet offset 4 bays in 25 inches Filing Hole Cross Perforation Cylinder Display: roll/roll roll/fold Machine is in production
used
Technical data Pulper for vacuum batch operation: Year of construction 2016 Operating hours approx. 3,500 hours Total volume pulper 40 m³ Working volume pulper approx. 28 m³ Stock consistency < 15 Material conveying speed from TKF 0.4 m/second Throughput rate up to 3.5 pulper batches per hour Drive power Pulper Hi-Torc drive 440 kW Max. Rotor speed 3,000rpm. Material types: Leached labels from breweries and mineral water bottling plants, wet-strength papers such as tissue production waste, security papers, etc., moisture content approx. 35 - 50%. Beverage carton and other film-coated papers, moisture content approx. 22% on average Kraft papers such as carrier bags, six-pack, sack papers without foil liner, ambient moisture content average 7% Corrugated cardboard waste and clean paper waste, ambient moisture average 7% Throughput calculation example in batch operation with leached label ...
used
Four-sided planer Ledinek 400/160/5 – Slovenian production – for wet wood – adjustable heads TECHNICAL PARAMETERS: planing width 400 mm planing height 160 mm spindle diameter 35 mm 1) bottom shaft 4 kW 2) upper shaft 5.5 kW 3) right head 4 kW 4) left head 4 kW 5) lower head 4 kW two feed speeds feed motor power 2.2 kW minimum material length 400 mm three upper toothed pulling shafts three upper smooth pulling rollers six upper pressure rollers pinion shaft pulling in the tabletop in front of the first head three auxiliary rollers in the top spigot diameter 5 x 110 mm machine dimensions (length / width / height) 310 / 180 / 170 cm weight ~2000 kg
used
offer 23034 Specifications: - grinding length approx. 350 mm - grinding width 150 mm - installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet grinding device - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg
used
Vertical pot sanding machine DELTA LF 350 Grinding length approx. 350mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2800 rpm Drive power approx. 3Kw Grinding movement right / left - manual Z -Delivery Manual Accessories: Magnet Documentation Wet grinding device 2 x pot disc Puller Grinding wheel protection Fine adjustment Z-axis Dimensions: LxWxH approx. 1x0.8x1.8 meters Weight approx. 600Kg
used
VERTICAL - POT GRINDING MACHINE DELTA LF350 Cgvnbqkquz Control - Conventional Grinding length approx. 360mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2850 rpm Drive power approx. 3 KW Grinding Movement / Right - Left / Manual Z - Delivery - Manual Accessories: Magnet Wet grinding device Machine housing Documentation Puller Grinding wheel Fine adjustment Z - axis Dimensions: LxWxH approx. 1x1x1.8 meters Weight approx. 600Kg
used
SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...
used
Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!
used
Ball mill Vollrath EFC 100 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 100 l Drive power 1 kW Speed 45 1/min 3 ball mills each mounted on steel structure 3 x 3 ball mills available Very good operational condition, directly from production!
used
Wet glue labeling machine PE / Italy Year of construction 1996 Degree runner Type Splendid Chest label Type of bottle 0,50 + 1.00 L + 1,5 L bottle 3 .000 bph Walking direction left - right FILM AVAILABLE - PLEASE REQUEST Further information and price on request
used
grinding length: 630 mm grinding width: 200 mm workpiece height: 400 mm x-travel: max. 710 mm y-travel: max. 250 mm distance between table/spindle: max. 500 mm table surface area: 600 x 200 mm table speed -stepless-: 2 - 18 m/min cross feed of table continual: 0 - 4 m/min cross feed of table intermittent: 0,2 - 20 mm/Hub grinding wheel size: ø 200 x 20 mm grinding wheel hole diameter: ø 51 mm grinding spindle speed: 2830 U/min grinding wheel motor: 1,1 kW total power requirement: 6,5 kW weight of the machine ca.: 1,4 t Accessories: magnetic plate 600 x 200 mm, DRO on Z-axis, various grinding wheels, 1 grinding wheel with flange, wheel trueing attachment, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
EVAPCO ESWA 96-44K Brand:EVAPCO Type:ESWA 96-44K Stock number:M23-3324 Cooling capacity:602 kW Application:Cooling Number of fans:1 Refrigerant:Water / Glycol Voltage:400 Volts Motor power:20,5 kW Dimensions:3700 x 2400 x 5350 mm Weight:7,643 kg Year:2017 Number in stock:1 piece(s) Price:Quotation request Description: Nice Evapco cooling tower with 1 fan. Mentioned capacity at a water temperature of +32,2/27,2°C (inlet/outlet) and a wet bulb temperature of +22°C. Visit our website: used-refrigeration
used
- Wet double belt grinder for deburring and pre-grinding - 2 abrasive belts with different grain sizes -Water cooling - manual belt centering - Belt speed 7m/sec. - Sanding belts 100/920 mm - 100/915 mm
used
grinding length: 900 mm grinding width: 510 mm workpiece height: 400 mm table surface area: 800 x 400 mm longitudinal feed of the table: max. 980 mm table speed -stepless-: 1 - 35 m/min grinding wheel size: 355 x 51 x 127 mm cross feed of the table: 460 mm cross feed: 1 - 40 mm/Hub vertical feed autom.: 0,005 - 0,04 mm/Hub rapid traverse vertical: 0,5 m/min grinding spindle speed: 1450 U/min grinding spindle drive: 5,6 kW table load capacity: max. 1000 kg total power requirement: 10 kW weight of the machine ca.: 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Year of construction: 1993 Labeling machine Labeling of flat objects max. 5,000 cycles / h (idle) Label height approx. 40 x 315 mm Label length approx. 80 x 200 mm Semi-automatic Manual system Wet glue Box display Delivery date: immediately Price on request. We deliver and install worldwide!
used
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, wet vacuum cleaners -Connection: 220 volts -Plastic container for sucking up liquids -Power: unknown -Weight: 22 kg
used
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, wet vacuum cleaners -Connection: 220 volts -A role is missing -Plastic container for sucking up liquids -Power: 1250 watts -Weight: 6 kg
used
High-speed planer and moulder Weinig H30 R for four-sided planing and profiling of wet wood (freshly sawn) The machine is in the queue and is being prepared for delivery after the order has been placed., working width: 250 mm, working height: 140 mm, spindles: 5, spindle 1: Bottom (7.5 kW) - counter bearing, spindle 2: Right (11kW), spindle 3: Left (11kW), spindle 4: Above (15 kW) – counter bearing, spindle 5: Below (30 kW) - toothed belt drive / counter bearing, feed: 15 kW, control: ATS system, Powered table rollers: Yes
used
Capacity: 4.2MW incl. accessories such as - Fuel line incl. storage tank -Air heater -Blower - Ash discharge - Wet electrostatic precipitator
used
Overview This labeller was manufactured in 1999 by Auxiemba and is used by a winery from Spain. The company decided to replace this labeller by an auto adhesive unit. The machine is under working conditions and can be visited. Tech Specs Output: max. 14,000 bph Labels: self-adhesive labels and wet glue labels Bottle formats: 375 ml 750 ml 1500 ml
used
To be sold on behalf of customers! Krones wet glue machine from sparkling wine cellar with various format sets Mash. Item No. 733-027
new
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination), The water can be mechanically filtered with a water screening system (available separately), electric cabinet, Users manuals , drawings, CE compliance
used
Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...
used
Manufacturer: Holtkämper und Adoplh, Type: Reinraum Spritzkabine, Year: 1996, Schleifraum m²: yes/, Lackierraum m²: yes/, Trockenraum m²: yes/, Zuluftfilterdecken: 2, Wet splashback: 2, Length max mm: 4000 X 2100, Sliding doors: yes, Number of spray booths: 1, Number of evaporation booths: 1, Underfloor exhaustion: yes, Hand spraying stations: 2, Radialventilatoren: 5, Exhaust air device: yes, Ex-installed lamps: yes, Air entry ° C: 12, Air exit ° C: 28, Supply air fan:: 3, Engine power kW: 7,5/3/1,1, Heating medium hot water: yes, Ceilings for incoming air: 2, Sliding doors: yes, Year :1996
used
Weinig Hydromat H22N four-side planer - German production -DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - Spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min Feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers One Upper Rubber Pulling Roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons
used
Diaphragm pump, air-operated diaphragm pump, chemical pump, water pump WILDEN Pro-Flo® Series P4 Material: Plastic with metal clamps Connections: 1 1/2 ( inches ) ( 38 mm ) with DIN / ANSI - flange Flange diameter: Ø 80 / 125 mm bolt circle diameter: Ø 98 mm, 4x bore: Ø 14 mm Control air connection: 1/2 ( inch ) Flow rate: approx. 350 l/min Discharge pressure: max. 8.6 bar suction height: approx. 4.0 / 8.0 m ( dry / wet ) Solid size: max. 4.8 mm used, tested ! Dimensions: 390 x 300 x 590 mm
used
Diaphragm pump, air-operated diaphragm pump, chemical pump, water pump WILDEN Pro-Flo® Series P2 Material: Plastic with metal clamps connections: 1 ( inch ) ( 25 mm ) with DIN / ANSI - flange Flange diameter: Ø 70 / 115 mm bolt circle diameter: Ø 80 mm, 4x bore: Ø 13 mm control air connection: 1/4 ( inch ) Flow rate: approx. 140 l/min Discharge pressure: max. 8.6 bar suction height: approx. 4.0 - 8.0 m ( dry / wet ) Solids size: max. 3.2 mm used, tested ! Dimensions: 274 x 300 x 385 mm
used
Diaphragm Pump, Air Diaphragm Pump, Chemical Pump, Water Pump WILDEN Pro-Flo® Series P1 P1/PPPPP/TNU/TF/KTV1 Material: Plastic with metal clamps Connections: 1/2 ( inch ) ( 13 mm ) Control air connection: 1/4 ( inch ) Flow rate: approx. 50 l/min Discharge pressure: max. 8.6 bar suction height: approx. 5.0 - 9.5 m ( dry / wet ) Solid size: max. 1.6 mm Ball valve: +GF+ ( GEORG FISCHER ) Type: 546 DN15 Material: PP-H, EPDM used, tested ! Dimensions: 270 x 210 x 310 mm