wet used for sale

K+G Wetter Angle-Grinder E 130mm, 130mm, all stainless steel, 2 speeds, sorting device, in very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

The aspirator Wetzikon weather is 3 pieces in good condition, ready to use. It consists of intact plants, which have operated until now following machines: CNC machine Striebig vertical panel saw Planing machines Wide-belt sander Table circular saw Edge glue machine Moulding machine The exhaust system consists of 3 installations: 1 system with filter and 2 bag system 2 + 3 system with wooden box below and filter system various pipes and branches, 1 fan 3 HP, 1 fan 2 HP etc. Weight 350 kg Built in 1975 Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

K+G Weather SM 120 T2M-R, 120 litre cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keypad, knife shaft speed 2-tourig, 2 bowl speeds, mixing gear forward and backward, temperature-end shutdown, digital display knife shaft temperature bowl, knife head with 6 knives. The machine is currently undergoing refurbishment and will be available shortly.

K+G Wetter SM 65 STL bowl cutter, 65 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife Speed, 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse, temperature switch off function, knife head with 6 knives. The machine is immediately available and can be tested like in Koblenz, Germany.

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter D 114 Typ 409 mixer automatic grinder, 114 mm hole plate diameter, almost completely made of solid stainless steel, mixing unit with mixing-worm and paddle-mixing-shaftmain switch and electric control integrated in machine housing. YOu are very welcome to test the machine in Koblenz, Germany.

K+G Wetter D 114 Typ 409 mixer automatic grinder, 114 mm hole plate diameter, almost completely made of solid stainless steel, mixing unit with mixing-worm and paddle-mixing-shaftmain switch and electric control integrated in machine housing, performance max. approx. 2,400 kg/h, hopper capacity approx. 110 liters, electrically interlocked safety grid for hopper. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter SM 90 STL bowl cutter, 90 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife speed up to 5,000 rpm., 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse (40-500 UpM), temperature switch off function, knife head with 6 knives, power 32 kW. You are very welcome to test the machine in our facility in Koblenz, Germany.

K+G Wetter vacuum Cutmix 120 STL, model VCM 120 ,120 liters vacuum cutter, variable knife sdpeed, 2 bowl speeds, mixing speed forward and reverse, variable bowl speed, unloader manually operated, hydrlauic unloading device, knife cover electrically operated, with cooking facility. Further Information on demand. You are very welcome to test the machine in our facility in Koblenz, Germany.

K+G Wetter AW 114 Typ 271 automatic grinder, main switch and control integrated in the machine housing, surface - hopper - worm housing - worm all stainless steel, push button control, saftey grid electrically interlocked, ejection for worm and cutting set, hole plate diameter 114 mm You are very welcome to test the machine in our facility in Koblenz, Germany.

K + G wetter SM 120 STL, 120 litres cutter, membrane keyboard, variable knife speed, 2 bowl speeds, mixing speed forward and backward, S + S knife head with 6 blades, unloading device, hydraulic loading device. You are very welcome to test the machine in our facility in Koblenz, Germany.

K+G Wetter Mixer-Angle-Grinder E 130 mm type 279 with loading device, capacity of hopper (with hopper attachment) 245 l. You are very welcome to test the machine in our facility in Koblenz, Germany.

+ G weather mixing angle Wolf G 160 mm type 449 with loading, mixing unit with mixing screw and paddle mixing shaft, hopper capacity (the Ausf. Funnel attachment) 245 litres. Gladly we invite you, to visit the machine with us in 56070 Koblenz.

K+G Wetter Electric-Grinder D 114mm with sorting device, year 2007, with unger cutting system. You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

Suitable for processing optical elements, including grinding disks.

Roller sets for profile bending machine HERKULES WETZLAR The rollers fit on a profile bending machine HERKULES WETZLAR type BO 238 N and also come from such a machine. Shaft diameter 80/60 mm Roller diameter 160/180 mm Roll width max 180 mm The machine had 2 driven rollers Weight of all rollers approx. 100 kg good condition; used

K&G Wetter/Möhle Wolf E 22 Enterprise 1.5 kw, 400 volts Used machine, function tested several available, from purchase of 3 pieces special price

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

K+G Wetter Cutter 90 liters SM 90 STL Type 261

K+G Wetter grinder, type: MW 130, machine number: 279/1087/1, plate diameter: 130 mm, total dimensions: 1250 mm x 900 mm x 1270 mm. Without mixing arm.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Wet grinding machine Manufacturer: Loewer Type: SmartGrinder SG300 K Year of construction: 2017 Rectangular ear loops Square tubes 180 x 180 mm L= 300 mm Rectangular tubes W = 280 mm, H= 180 mm, L = at least 300 mm For grinding or deburring metal Wet scrubber UT-N3 with sludge tank 2 pieces roller conveyor Ulmatec wet scrubber Type: UT-N 3 Year of construction: 2017 Motor: 3.0 kW, 400 V, 50 Hz

Wet grinding stone, column grinder, column grinder -Wet and dry sander -Grinding wheels: 220 x 40 mm -Motor: 0.55 kW -Speed: 600 rpm -Dimensions: 650/300/H1200 mm -Weight: 80 kg

NEUMASCHINE - Wet suction system made of steel or stainless steel - Extraction power 1650, 3750 or 7000 m3/h engine 3, 5.5 or 15 kW; NEW MACHINE

Sweeper and scrubber Tennant 8210 diesel 100 Combination of suction Sweeper and wet scrubbing machine with Kubota diesel engine, High emptying, infinitely variable hydrostatic travel drive, automatic functions. 2 x available, paid hours approx. 220 and about 1020. More information, photos and offer on request!

NTS 200 Wet grinder Grinding wheel diameter 200 mm Grinding wheel width 40 mm Honing diameter 220 mm Honing wheel width 30 mm Speed 120 min¯ ¹ Power drive motor 0,12 kW Power output drive motor 0.06 kW Supply voltage 230 V 50 Hz Motor speed 1400 348 mm, width / depth length 285 mm, height 275 mm Length max 460 mm, width / depth 380 mm, height 435 mm Weight 9.2 kg G & pieces 5750200 Option: Stand with door

NTS 255 Wet grinder Grinding wheel diameter 250 mm Grinding wheel width 50 mm Honing diameter 200 mm Honing wheel width 30 mm Speed 90 min¯ ¹ Power drive motor 0.2 kW Power output drive motor 0,12 kW Supply voltage 230 V 50 Hz Motor speed 1400 Length 380 mm, width / depth 370 mm, height 420 mm Length max 440 mm, width / depth 400 mm, height 490 mm Weight 17 kg G & pieces 5750255 Option: Subframe

Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Wet acceptance system, swimming / sinking system, swimming / sink container with discharge belt, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Type NA 650 Filling height approx. 2 m Funnel approx. 2.4 x 1.9 m Depth to the band approx. 1.2 m Bandwidth approx. 600 mm Drive via infinitely variable gear motor Total dimensions: approx. 4 x 2.1 x 3.1 m The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Jet JSSG-10 Wet grinder STEPLESS SPEED 90-150 RPM. Grinding wheel D=250 x 50 x 12mm Versatile in professional version for sharpening planing knives, chisels, and other tools incl. protractor, leather pulling disc and 1 tube polishing paste for polishing Base and 2 drawers G&JET-708015M

strip encoder for wet adhesive tape Cyclop Lapomatik; good condition; cleaned and tested; Max. Ready to roll 100mm, min.20mm; Strip length 100-1150mm; Heater for quick drying. Paper tape dispender Cyclop Lapomatik; good condition; cleaned and checked; max.roll width 200mm, min.20mm; Strip Lenght 100-1150mm; heater for fast drying.

Wet mill Manufacturer: Quadro Type U 10 Year of construction 2019 GMP/Pharma New Original Packaging Documents available

1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price

Scrubbing machine Manufacturer Hako Type B 750 R Built in 2010 only 27 operating hours! Ezai8rj Battery very good Little used very good condition

There are two TEKA WNA 7500 AL available, volume flow: 6500m³/h, power: 7.5kW, weight: 780kg.

There are two separators available, volume flow: 3600m³/h, total pressure: 4000Pa, operating temperature: 20°C, connected load: 11kW, operational hours counter: 5994h.

Features: chain conveyor is monitored, fill level is monitored via pressure difference in both chambers, large maintenance hatch on the discharge side, honeycomb filter below the flue flange, higher gear ratio with more powerful motor on the chain conveyor, water overflow optimised, larger water slider for emptying, the fan has ATEX certification.

Includes two Rectifying Module BMR Colibrì, with documentation, an inspection is possible.

Product number: 2733 Type: ValueSpray Serial number: 10095201 Year of construction: 2011 Belt width: 280 mm Nozzles: 4 pcs. Compressed air: 8 Bar, 400 Nl/min. Power: 3 x 400V, 50Hz, 1.3kW Dimensions: 750 x 1350 x 1800 mm Weight: 235 kg

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

Inv. Num. : 6026 Type: NA K-3600 Producer: ESTA Created: 2012 Parameters: Supply voltage: 400 V Air flow rate: 3125 m³/h Current consumption: 10.9 A Machine dimensions: 950x950x3510 mm Machine weight: 510 kg