wet used for sale

Combined flat and cup grinding machine make KLAIBER type HV 2Masch. -No: 641 built in 1965Grinding area: 400 x 100 mmGrinding height: 200 mmCup grinding: 150 x 80 mmTable mounting surface: 500 x 150 mmmagnetic clamping plate: 300 x 150 mmHeight of the magnetic disk: 80 mmGrinding wheel size: 150 + 175 mmSpindle speeds: 3560/3360 rpm.Drive power: 1.5 hpWeight approx.: 430 kgWith- combined for horizontal and vertical use- Grinding wheel dressing device- wet grinding device- Suction deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Labelling machine Krones Vinetta Y.O.M. 1994, li-re, 6 plates, 1 wet glue unit, Ma. no. 721-536, container 0.7 L VdF hull, 1.0 L VdF fuselage + chest, 0.2 L VdF fuselage. Machine can be visited on site. Age-appropriate condition.

DETROIT DIESEL 6 71 TI 485 HP - 2500 RPM Listing ID 20095 Make DETROIT Model 6-71ti - 24V STARTER - Serial No. 6A 0474626 Cylinders 6 V / Inline INLINE Power 485 HP RPM 2500 RPM MAX RPM 2700 General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / WATER COOLED TURBO / HEAT EXCHANGER Turbo WET Dimension 130 X 100 X 120

Carpenter belt grinding machine make BÜTFERING type C 55Machine -No: 6397Grinding table size: 2500 x 850 mmRoller center distance: 2900 mmSanding belt size: 6630 x 150 mmBelt speed:Dry grinding (with main switch to 2): 20 m / sec.Wet grinding and polishing (main switch to 1): 10 m / sec.Size of the pressure plate: 150 x 110 mm1 roll has a side grinding surface: Drm. 225 mmDrive motor: 4 hpOutside dimensions approx .: 3500 x 1500 x 1300 mmWeight: 750 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

ID NO 20109 MARINE DIESEL ENGINE Reference number 20109 Brand DETROIT Model 12V71 Power 382 HP RPM 1800 MAX RPM 1950 Serial number 12VA 085003 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 30 Flywheel INCLUDED Governor Exhaust system WET Turbo NONE Cooling system HEAT EXCHANGER Starter INCLUDED Remarks RUNNING ENGINE SPECIFIC FEATURES Panel NO PANEL Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) APPROX 2500 KG

max. web width: 370 mm - unwind for paper rolls, max. unwind 40' web guide and 1 pneumatic shaft - dancer controlled pneumatic brake - 4 wet offset printing units with conventional dampening - cylinder circumference 16 2/3' fixed size - reel rod blanket cylinder - each inking unit can be declutched - circumferential register for straight web path from central control table, variable with curser - optical web break detectors - central dampening water circulation system - roller washing device - drip oil lubrication - perforation and cutting station - Remaliner punching and file hole punching - rewinder for max. paper diameter 28' (70 cm) and 1 pneumatic shaft 70mm - strobe light - cross cutter (sheeter) - turn bars for reverse printing - plate bender - electric power supply: 380 V, 3 Phasen, 16 kW - length of the machine: 7,9 m - speed: max ...

Comitrol 1700 with feed screws and exhaust mat. There are 12 Comitrol processors to meet production requirements and offer many configuration possibilities thanks to a wide range of power and evacuation devices. Each model is designed for a unique and continuous passage that does not require the intervention of an operator. Dimensional reduction is accomplished by cutting the product without any contact between two metal parts. The absence of random movement of the particles ensures a grinding of high efficiency in a single pass. The Comitrol model 1700 processor can receive all three types of reduction heads (shown on the left). It is recommended for fluid, dry and semi-wet products such as textured vegetable proteins, peanut butter, flour and cheese. Comitrol versatility: Various consistencies ranging from dry products to liquids to pasty products. Precise reduction in  ...

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

MARINE DIESEL ENGINE Reference number 20112 Brand CUMMINS Model KTA19-M600 Power 600 HP RPM 1800 PEAK TORQUE 1950N.m @1500r/min General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED WITH FLEXIBLE COUPLING Governor MECHANICAL Exhaust system WET Turbo TURBOCHARGED AND AFTERCOOLED Cooling system WATER COOLED Starter YES- 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel NO - CAN BE DELVIERED EXTRA Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) 2450mm x 1150mm x 2000mm Weight (kg) APPROX 2700 KGT

DEUTZ SBV 6 M 628 - 882 kW - 1200 HP - 926 RPM Reference number 20116 Brand DEUTZ Model SBV 6M 628 Power 1200 HP 882 KW RPM 926 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor HYDRAULIC Exhaust system DRY Turbo WET Cooling system WATER COOLED Starter YES- AIR Remarks RUNNING ENGINE FEATURES Raw water pump INCLUDED Expansion tank Heat exchanger DIMENSIONS LxWxH (cm) 3200 mm x 1500 mm x 2450 mm Weight (kg) APPROX 11000 KG

1. feeding conveyor belt 10000/ 800 5.5 KW 2.shredder technofer CC940 SO 55 kw 3. extracting conveyor belt 12000/ 800 2,2 kw 4. heavy contaminants settling tank technofer vads 2,2 kw 5. washing centrifuge technofer LO 25 37 kw 6.conveyor belt 4000/ 800 2,2 kw 7. conveyor belt 6000/800 2,2 kw 8.wet grinder 800/800 55 kw 9. extracting auger 300/ 6000 2,2 kw 10.washing centrifuge jiangsu fungsheng fs 1000 55kw 11.extracting auger 400/7000 2,2 kw 12. screw press 75 kw 13. dry grinder 55kw 14. blower 11 kw 15. serpentine dryer with hot air generator 30 kw 16. stocking silo with mixer 3,6 kw 17.double stage cascade extruder granulator FDJ 130/150 - cutter compactor motor 75 kw - first extruder d130 motor 132 kw - second extruder d 150 motor 55kw - t ...

Reference number Brand Model Power 20152 CUMMINS KTA19-M3 600 HP 1800 RPM PEAK TORQUE 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC INFORMATION Flywheel housing Flywheel Governor Exhaust system Turbo Cooling system Starter Remarks Sae-0, Sae-1 18 inch, 14 inch MECHANICAL WET TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm

Concept Laser Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminum and titanium alloys etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Shielding gas possible through 2 connections for external N2 generators (optional) Build volume 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501.973 hrs Laser 2: 503.411 hrs Other devices: Lifting device Inox 200 Weight: 102 kg Max lifting capacity 135 kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kw Voltage: 230 V 9.2 A IP65 pro ...

Spreading attachment Schmidt SST 20 – OAXN MITOS, wet salt spreader with conveyor screw. For Unimog, trucks with municipal hydraulics. Content 2 m3, Sole 860 ltr.. Equipment with tarpaulin folding roof, storage stand, height-adjustable, remote control, Optional PTO pump and hydraulic oil tank available. More winter service technology available - see example photos!

Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...

fruit Vegetable Processing line Haith fruit Vegetable Processing line Haith 2020 line for packing root vegetables (carrot, parsley, beetroot, potato) wet or dry production. PACKAGING MACHINES FOR FRUIT AND VEGETABLES Fruit and vegetable cutting Geloog vegetable slicers and dicers fruit and vegetable prep Chanda machines Hento Vegetable packaging machinery Fruit peelers Kronen PGW Grid cutter; Salad spinner; Grid cutter; Salad basket spinner Nilma vegetable washer and dryer pasen Vegetable And Fruit Processing Xinyu Machinery, Kronen, Furu Tail, Eillert MSD-500-V Nilma Turboidrex vegetable washer and dryer; Potato rumbler; vegetable cutting machine Apple peeler; Belt slicer; Vegetable prep machine; JFPT fruit Food Preparation Vegetable washing Vegetable dryer Dry fruits processing Frozen vegetables processing machinery; Sunflower; Eternalwin, Ocean

Please Find here with Details of JENBACHER J 612 GS-E 101 Gas Engine Sets Available for Sale. MAKE:JENBACHER TYPE:J 612 GS-E 101 KW:1871 RPM:1500 VOLT:400 HZ:50 WET:9500kg RUNNING HOURS:25265 Kindly advise your interest

With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm

Please Find here with Details of JENBACHER JGS612GS-L Gas Engine Sets Available for Sale. MAKE:JENBACHER TYPE:JGS612GS-L KW:1823 VOLT:415 HZ:50 WET:15270kg YEAR:2012 RUNNING HOURS:20517 Kindly advise your interest

Description Hand-held battery-operated scrubbing machine with roller technology used for basic cleaning, wet cleaning, maintenance cleaning and polishing of flat floors up to 1900m²/h." Power requirement 220Volt 50Hz

TECHNICAL INFORMATION Manufacturer: Främbs & Freudenberg Name: inclined circular swing sieve type "Roberg" Design: Wet screening Number of screen decks: 2 Drive power: 15 kW Feed power: 150 t/h Dimensions (length/width): 5,000 x 1,500 mm Screen area per deck: 7.5 sqm Screen inclination: 13° Screen covering first deck: Synthetic Screen covering second deck: Synthetic Siebwanne: available Water requirement Brewing: 200 cbm/h Schurrenwagen: available If there is any interest, we are happy to send you an offer with photos. EuroConsult Dimitrios Piretzidis

TIMESAVERS 41 SERIE 1350 WRD deburring machine was manufactured in 2004 in the Netherlands. The wide belt deburring machine is used in both small and large production facilities for precision smoothing of sharp edges and finishing work. The machine provides high performance and reliability throughout its service life. The surface machining of workpieces made from e.g. steel, aluminium and titanium is performed wet by a grinding system comprising a reliable abrasive belt and brush unit. The workpiece is dried at the end of the machining process so that the parts leaving the machine are dry and free of contamination. The deburring machine has an integrated paper belt filter into which the used coolant is transferred at the end of the process in order to separate the swarf and allow the coolant to be reused. Technical specifications of the TIMESAVERS 41 SERIE 1350 WRD deburring machin ...

specifications: - maximum grinding length 360 mm - maximum grinding width 155 mm - maximum installation height 280 mm - Grinding wheel stroke approx. 240mm - Clamping area 400 x 160 mm - Magnetic clamping plate 300 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet loop fitting - Drive 400 V / 3 kW - Space required approx. W 850 x H 1700 x D 950 mm - Weight approx. 550 kg

Conveyor for wet pieces in laquer line Length: 3 m. Width: 1,3 m. Cleaning brush at the bottom Motorised feedworks

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

Polystyrene compressor Styropactor MAXI | Shredder press for Polystyrene EPS Compressor, combination of shredder and press for polystyrene EPS MAXI Commodity number: 42055 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 70-90 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 100-120 Connection: 7.5kW, 3-phase 400V/50Hz 480V/60Hz Insertion opening: 600×1000 mm Length: 3180 mm Height: 1600 mm Width: 870 mm MAXI PLUS Commodity number: 42060 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 110-130 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 170-200 boxes/h Connection: 11kW, 3-phase 400V/50Hz, 480V/60Hz Insertion opening: 600×1000 mm Length: 3680 mm Height: 1600 mm Width: 870 mm Wet boxes: YES Stainless stee ...

2 x Carton erector, Bedo, VA 1295 – second-hand - : Price ex location: now only 22.500.-€ instead of 32.500.- € (net)! Manufacturer: Bedo Type: VA 1295 Year of construction: 2008 Machine number: 1295.1.6911/ 1295.1.6912 With two magazines 400V/3PN/ 50Hz Control voltage: 24V 14.2 A Compressed air: 5- 7 bar with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Condition: good Available: now Location: Hanau area More photos on request! Manufacturer's text: Series 12 up to 40 cartons per minute Folding crates according to FEFCO 0201, 0200, 0209 and others all types of corrugated board Cardboard closure by means of hot melt glue, self-adhesive tape or wet adhesive strips small to very large carton formats one or two cardboard magazines Fully motorized way of working no format parts

Labeler / Labeling Machine Wet glue labelling machine Langguth E 32 / R-315 Container size 2 - 30 l Year of construction 2008 incl. glue pump swing magazine with single-stroke and handle guide very good ready-to-use condition, directly from production!

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

Ball mill Drum mill Wet grinding body Mill clinked TMNP17/2 with engine and adjustment gearbox used Manufacturer: VEB Type: TMNP 17/2 Year: 1984 Drum length approx. 2010 mm, walled out inside with wear-resistant clinkers Drum Ø ca. 1700 mm Wall thickness approx. 17 mm Drive gear Ø approx. 870 mm x 100 mm Opening approx. Ø 220 mm / 450x450 mm with coaster block gearbox and approx. 15 kW electric motor The substructure can be offered as a steel structure by us Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

grinding length: 500 mm grinding width: 200 mm workpiece height: 250 mm total power requirement: 5,5 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _________________________________________________ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 ...

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

Quadro Comil model 197S conical mill 197S conical mill This machine is as new EX / ATEX 316 ss with RPM display suitable for screening wet or dry powders. The machine has a capacity of 45 - 450 kg/hour depending on the product characteristics and the screen being used. It is driven

Equipped with 2 grinding units Including wet extractor (suitable for aluminum, among others)

This TIMESAVERS 42-SERIE-1350-RB Deburring machine was manufactured in 2012 in Netherlands. This machines passage width is 1350 mm. It comes with rotating brushes that include wet extraction unit. Contact us anytime for further information.

Double grinder bench, make GREIF type D 30 - 5 - 5 KTMasch. -No: 208478, year of construction 1984Technical specifications:Grinding wheel size: 300 x 50 x 76 mmCut-out: 130 x 30 mmSpeeds: 1500 rpm.Drive power: 1.5 kWPower connection: 380 V / 50 HzWeight: 200 kgExternal dimensions: 1100 x 450 x 1500 mmWith- K 36 + K 60 grinding wheels- Tool support 260 x 165 mm- Tool support can be tilted- coolant device- Dry and wet grinding- Eye protection glassused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C

Flat belt grinding machine make MAFAC type NT 300 SFabr. -No: 417643 Year 1986Tape dimensions: 2000 x 300 mmBelt speeds: 6, 8, 10, 12, 16, 20 m / srequired air pressure: 5 - 6 barDrive power: 9.3 kWDimensions L x W x H: 1440 x 1200 x 2047 mmWeight approx: 500 kgWith- Table motorized vertical and horizontal- wet grinding device- pneum. belt tension- Deburring and chamfering deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double tool grinding machine make REMA type DS 12/250 WFabr. -No: 077030Grinding wheel size: 250 x 40 x 51 mmGrinding wheel speed: 1450 rpm.Table size: 165 x 180 mmDrive power: 0.73 kWDimensions L x W x H: 900 x 800 x 1100 mmWith- wet grinding device- right tiltable table- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table dimensions: 2000x500mm, magnet clamping plate dimensions: 2x 1000x400mm, weight: 7t, with documentation, rectifier system hand crank dresser, wet grinding device, paper belt filter, grinding wheel and grinding wheel holder, the machine needs to be overhauled.

The electric self-propelled machine has two rotating brushes it also works with chemicals and doubles as a wet vacuum cleaner with a rubber blade. Manufacturer: CLEANFIX Accommodating size: 1300 x 1100 x 1100 mm Rotating brush diameter: 2 x 250mm Electrical supply voltage: 24V from 2 lead-acid batteries

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

General Fully automated concrete pipe factory. Pipes are produced with self compacting concrete (‘wet cast’) which makes the operation labour friendly (low noise and no vibration) and gives state of the art products: every pipe has exactly the size, with a flat surface and is very easy to install by constructors. Video`s is available upon request. Plant can be seen after appointment, Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

With 2x self-adhesive aggregate AVERY, 1x wet glue aggregate, 1x format set, spare parts, format parts and documentation, machine was maintained regularly.

Order No. 6716 TECHNICAL DATA - max planing width 510mm - maximum planing height on both sides 190mm - maximum four-sided planing height 130mm from down: - guide rails - preliminary table, adjustable - smooth skid roller - 510mm planing shaft, 4-knife 5.5kW - 2 smooth, sliding shafts - adjustable rollers in the lower table top in advance: - pulling shaft, toothed - pressure - pulling shaft, toothed 2 pcs - pressure - 520mm planing shaft, 4-knife approximately 7.5kW - pressure - pulling shaft, smooth - pressure in the back: - side spindles 2 pieces - 1.right, vertical 130mm 4kW - 2nd left vertical 130mm 4kW - manual spindle feed - diameter of the spindles 40mm - adjustable spindles up / down, right / left - the axes are positioned alternately - side clamp 2 pcs - locking spindles - 2 types of feed speed + smooth about 3kW - diameter of the extraction conn ...

For sale two (2) maschines made by Pallmann, one 132 and second 200kw for processing chipwood till saw dust in wet condition (this maschine has rottary kniwes moving on left side and sieve moving opposite and make super results. Price: 132kw = 20.000 EUR Price: 200kw = 39,000 EUR