welding table used for sale

Model: Hardened steel Table length [mm]: 3000 Table width [mm]: 1500 Tabletop thickness [mm]: 15 Auction-ID: A1-40976-74

Model: Hardened steel Table length [mm]: 2000 Table width [mm]: 1000 Tabletop thickness [mm]: 15 Auction-ID: A1-40976-72

Welding table/clamping table, drilled holes and diagonal grid. Table-thickness: 15mm, hole-diameter: 28mm. Including a full set of accessories: - 4x 3D Angle - 6x Stop small - 6x Stop large - 1x Protractor - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp Auction-ID: A1-40976-89

Welding table/clamping table, drilled holes and diagonal grid. Table-thickness: 15mm, hole-diameter: 28mm. Including a full set of accessories: - 4x 3D Angle - 6x Stop small - 6x Stop large - 1x Protractor - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp Auction-ID: A1-40976-90

Basic Set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 quick-clamping bolts 2 pcs universal stop 100mm 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 300mm 2 pcs stop and clamping angle 75mm 4 pcs stop and clamping angle 175mm 4 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 Burner Holder 1 pc. eccentric stop 100mm diameter 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, natural, organic based 2 pcs Welding Table Cleaner 500ml, natural, bio-based Condition: never used / new (5)

Special Set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe Screw Clamp D28 90° – Art.Nr. 4028397 3x Pipe Screw Clamp D28 180° – Art.Nr. 4028396 3x Pipe Screw Clamp D28 45° – Art.Nr. 4028398 3x Pipe Screw Clamp D28 300x150 – Art.Nr. 4028399 3x Pipe Screw Clamp D28 300x200 – Art.Nr. Reference 4028400 15x Ball Lock Pin D28x50 – Art.Nr. 4027663 10x Stake-out bolts D28x80 – Art.Nr. 4028876 4x Universal Stop D28 100x50x25 mm – Art.Nr. 4028469 4x Universal Stop D28 150x50x25 mm – Art.Nr. 4028470 4x Universal Stop D28 225x50x25 mm – Art.Nr. 4027657 2x Universal Stop D28 300x50x25 mm – Art.Nr. 4027659 2x Stop Clamping Bracket D28 75x50x75x25 mm – Art.Nr. 4028657 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028658 2x Stop Clamping Bracket D28 175x50x175x25 mm – Art.Nr. 4028649 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028652 2x St ...

Special set 96 pieces consisting of: 1x Tool Trolley 30x quick-release bolts with twist lock short, without O-rings 8x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 8x Stop and clamping angle 175 L - cast iron 2x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping bracket 750 G left - Nitrided 1x Stop and clamping bracket 750 G right - Nitrided 1x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping angle 500 G right - Nitrided 4x Stop and clamping angle 300 G left - Nitrided 8x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 16x Professional Screw Clamp - Nitrided 6x Professional Screw Clamp 45°/90° - Nitrided 4x Universal Stop 300 - Nitrided 1x accessory set consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample Non-stick and burner holder. Condition: n ...

XXL starter package, consisting of: - 15x – Standard clamping pliers - 5x – Multi-clamping pliers - 10x – Side clamp with eccentric - 15x – Loose Cam H30 - 10x – Loose Cam H100 - 2x – Pipe Insertion Knock Series - 10x – quick-release bolts - 10x – Stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – Angle of attack - 1x – Box - 1x – Insert holder - 1x – Allen key - Tool trolleys Number of 100 Lots Hole diameter 28 mm Condition new Weight 280 kg Dimensions L x W x H 1.2 x 0.5 x 1.3 m Condition: never used / new (5)

Important note: the yellow bars shown in the pictures, as well as all welding accessories (trolleys with welding hoses and torches etc.) are not included in the sales and scope of delivery Mobile table with perforated plate (was used for welding) incl. clamping accessories for the perforated plate incl. a mobile table with wooden plate Dimensions of the perforated plate: 2000 x 1200 mm Reference: Schiller - Lot 18 Weight: approx. 1200 Auction-ID: A7-46763-189

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Welding helmet welding helmet welding screen Prof RLM900 New RL-600K — Automatic Welding Mask (ADF) Filter size: 133 x 114 x 10 mm Viewing window: 100 x 93 mm Optical class: 1/1/1/2 Helmet material: PP (polypropylene) Eclipse Light mode: DIN 4 Dark mode: DIN 5–9 / 9–13 Switching speed Light to dark: 0.2 ms Dark to light: 0.1 / 0.4 / 0.8 sec (3 fixed modes) UV/IR protection: permanent up to DIN 16 Power supply: Solar cells + 1x CR2450 lithium battery (replaceable) Lens Control: Automatic Temperature Use: -5°C to +55°C Storage: -10°C to +70°CSonnet 4.6

<br>With near head UNION SPECIAL Maximum sack length: 120 cm<br><br><br><br>Verf Gbar: now

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms

; very good

Maho UIniversaltisch

Pneumatic round-table table 400 mm

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

Band conveyor 14 cm wide - 2.00 m long use as a stack table behind filling arrangements possibly nevertheless, height of the stack level (normally 0.75m) is changeable on 0.95 m. the band conveyor can be put about a Poti in the speed.

Many thanks for your interest on our new Heating/cooling table for chocolate or sugar-, candy dough, please find follow our offer: Heating table / cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 1200 x 800 x 800mm / or (lxbxw) : 800 x 600 x 800mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: folded plates made of stainless steel Standing on 4 feet, (square tube 50 x 50) optional height adjustable with two wheels and two castors water heated, closed system with electr. Thermostat, heat exchanger, circulation pump, safety valve 0.5 bar) Plate heat exchanger technical changes reserved Wir bieten diese Maschine als Neumaschine zum Verkauf an. I offer this machine as New machine

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

Load 150 kg

Div. test tables with excerpts or measurement Setup, height-adjustable feet. Individually to build up. Price for example corner plate 30, desktop incl. feet 80, Meßinstr. table incl. feet 90.

With stitching head UNION SPEZIAL Maximum sack length: 120 cm Available: now

Assembly table for structural timber elements, length max. 6000 mm, max. 3000 mm wide, 5 trapezoidal spindle ? clamping system manually, mechanically over the length of 6 m distributable, tubular steel structure with height-adjustable feet hot-dip galvanised, ideal for flying mount. Table can be extended if necessary and be equipped with more spindles or press items for an additional fee. The table is positioned behind the vertical panel saw, and can be visited if you are interested on the spot! Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

Motor data -1/1.9 HP -710/1420 RPM -380 Volt -3.7/3.8 amps

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW

Make: GÜNTNER Type: GVH 080.1B/2x5-L(S) Built: 2005 Max Pressure: 32bar Min. Pressure: -1bar Max temperature: 100C min. Temperature: -50C Volume: 380.1 litres Price on request

Table-fat-fryer Delivery time: 3 weeks Length: 544 mm Drop length: 1196 mm Height: 210 mm Width: 645 mm Weight without oil: 50 kg Power consumption: 230V / 50 Hz Power: 3,0 kw Baking capacity: 16 pieces Turning device: 4 pieces

Make: GÜNTNER Type: S-GVH 102C/2x5S Built: 2000 Max Pressure: 28bar Min. Print: -1bar Max temperature: 100C min Temperature: -60C (at 21bar) Volume: 400 litres Price € 10,500

Cat.-No. 15-00086 new Measurements and Weight: Height: 1100 mm Length: 2150 mm Width: 820 mm Weight: 100 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale Visit our Web-Site: www.eurolux-ag.com

2006 completely rebuilt Clamping surface: 1,800 x 1,800 mm Table height: 800 mm Maximum table load: 20 tons. Table displacement: 850 mm Electrics: 400 V / 50 Hz