welding table used for sale

table length: 2200 mm table width: 1500 mm stroke height: 1900 mm weight max. in kg: 3000 kg total power requirement: 1,5 kW stroke speed - idle stroke upwards: 55 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,650 t dimensions of the machine ca.: 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mm table width: 1500 mm stroke height: 1850 mm weight max. in kg: 2000 kg : 260 mm total power requirement: 1,5 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,45 t dimensions of the machine ca.: 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 200 mm height: 105 mm weight of the machine ca.: 25 kg dimensions of the machine ca.: 400 x 280x 150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.:400 mm weight of the machine ca.:130 kg dimensions of the machine ca.:500 x 600 x 160 mm

table length:630 mm table width:200 mm no. of flutes:3 weight of the machine ca.:55 kg

weight of the machine ca.:50 kg dimensions of the machine ca.:660 x 460 x 280 mm no. of flutes:3 groove width:14/24 mm surface area:570 x 460 mm

table length: 430 mm table width: 240 mm x-travel: 225 mm y-travel: 160 mm table height: 160 mm T-slots: 12 mm weight: 45 kg dimensions: 0,6 x 0,45 x 0,2 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 330 mm table width: 220 mm x-travel: 210 mm y-travel: 125 mm table height: 150 mm T-slots: 12 mm weight: 33 kg dimensions: 0,41 x 0,35 x 0,22 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter:500 mm clamping slots:6 x 14 mm weight of the machine ca.:190 kg dimensions of the machine ca.:500 x 650 x 300 mm

table diameter:250 mm groove width:12 mm weight of the machine ca.:47 kg dimensions of the machine ca.:500 x 450 x 150 mm

table diameter:200 mm groove width:12 mm weight of the machine ca.:25 kg dimensions of the machine ca.:350 x 300 x 170 mm

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 620 300 mm no. of flutes: 6 groove width: 14 mm total power requirement: 0 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600x400 mm table height: x mm table load: x t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paper vibrator with spreading rollers Baumann BSB 3/L, year of construction 1988, serial number 210277, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Bobr Sbjh H Ivij Nwkedc You are welcome to visit the machine in our house by prior appointment.

Rotary tablet press for tableting single-layer tablets. Easy punch tool change, quick to clean, low noise operation. Including dust collector, tablet deduster and vacuum feeder. - Specifications: press tool: D | number of punch stations: 15 | max. speed of the machine in neutral: 77 cycles/minute (corresponds to approx. 69,000 tablets/hour) | max. tablet diameter: 25 mm | max. filling depth: 20 mm | max. precompression force: 12 kN | max. main compression force: 100 kN | product contact parts are made of stainless steel SUS 316L, chassis is made of stainless steel 304 | power consumption: 5.5 kW | machine dimensions: 660?690?1620 mm | weight: 675kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short d ...

Automatic collection system for cans, glasses, bottles. Collection of single containers on rotating table so that jams can be avoided. - Specifications: up to 80 containers/min | diameter of table: 1.200mm | 380V, 0.18kW | machine weight: 50kg | dimensions: L1300xW1200xH1000mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

spindle diameter: 110 mm x-travel: 2200 mm y-travel: 1600 mm z-travel: 1600 mm spindle turning speed range: 35 - 3000 U/min spindle drive motor: 18,5 / 15 kW spindle taper ISO: 50 w-axis: 500 mm table surface area: 1250 x 1500 mm Table load: 5000 kg T-slot - width: 22 H8 B-axis (table): 0,001 ° Control: FANUC 31i-B Rapid Travel X / Y / Z-Achse: 12 m/min total power requirement: 50 kVA weight of the machine ca.: 21,5 t dimensions of the machine ca.: 7,8 x 4,8 x 3,7 m Assembly 2018 - CNC control FANUC 31i-B - Tool changer 60-fold (ISO 50) - Coolant system with IKZ 20bar - Chip conveyor - Renishaw OMP 60 - Universal milling head - Angled table (2) - CE only approx. 800h running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used semi-automatic tablet/capsule counter, produkcji firmy Kwang Dah z Tajwanu, model KDC-101. New: 2012 Capsules or tablets are counted in the machine by a sensor measuring the filling of the bottles. The sensor ensures accurate counting and dosing of tablets, lozenges, pills or transparent capsules. The machine is equipped with a compensator and a sensor that provides automatic adjustment according to the collected powder in the sensor window. Power supply: AC 110V/230V, 50Hz, single-phase, 5A Machine weight: 70kg Machine dimensions: 88 x 76 x 70 cm（length x width x height）

Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

workpiece diameter: 350 mm workpiece weight: 99999999 kg workpiece height: 240 mm total power requirement: 7,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespa ...

Stock number: DT077, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tablet deduster, Dimensions: L 400 x W 350 x 300 mm., Manufacturer: King, Model/type: BR 6

Stock number: DT072, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Theoretical capacity: Max 72.600 pcs/hour, Stations: Circular with 22 pcs. stations, Tablet size: Ø 19 mm., Manufacturer: Fette, Model: Perfecta 1000, Other: Control cabinet - Ø 11 mm. set of formats

Stock number: D1214, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: On a leg console, Tabletop diameter: Ø 1000 mm, Tabletop material: Laminate, Total height: H 950 mm, Manufacturer: King

Stock number: F423, Material: Painted model, In stock: Yes, Amount in stock: 1 pc., Item: Tablet counter, Standing: Table model, Motor: 220 Volt, Tablet: Max Ø 11,5 mm., Manufacturer: King, Type: TB2

Stock number: F728, Material: Painted model, In stock: Yes, Amount in stock: 1 pc., Item: Tablet counter, Standing: Table model, Motor: 220 Volt, Tablet: Max Ø 11,5 mm., Manufacturer: King, Type: TB2

Stock number: D698, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Separating table, Size: L 990 x W 570 mm. , Legs: 4 pcs., Other: Roller conveyor in the bottom

Stock number: D857, Material: Aluminium, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 2500 x W 1260 x H 1000 mm., Legs: 4 pcs.

Stock number: D2030, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1100 x W 760 x H 820 mm., Legs: 4 pcs.

Stock number: D649, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1560 x W 700 x H 900 mm., Legs: 4 pcs.

Stock number: D1171, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1400 x W 900 x H 810 mm., Legs: 4 pcs. with wheels, Other: Tabletop and legs can be separated

Stock number: D2015, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1790 x W 700 x H 880 mm. , Legs: 8 pcs., Shelf: 1 pc., Other: Raise/lower function, 0-200 mm.

Stock number: D2009, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table top, Size: Table top L 2800 x W 650 mm. , Sink: Yes, L 500 x W 400 x H 180 mm.

Stock number: D2029, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 2200 x W 1000 x H 800 mm., Legs: 4 pcs.

Stock number: D1168, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 700 x W 300 x H 600 mm., Legs: 4 pcs. with wheels, Shelf: 1 pc.

Stock number: D1095, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1000 x W 760 x H 1170 mm., Legs: 4 pcs., Shelf: 1 pc., Other: Fiberboard on top

Stock number: D1110, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: Table top L 2075 x W 700 mm., For wall mounting: Yes, Shelf: Leg frame with shelf L 4000 mm., Other: Electric raise/lower function

Stock number: D1067, Table, stainless steel,, standing on legs., L 1340 x W 750 x H 570 mm., Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1340 x W 750 x H 570 mm. , Legs: 4 pcs.

Stock number: D1066, Table, stainless steel,, standing on legs with wheels., L 1100 x W 800 x H 800 mm., Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1100 x W 800 x H 800 mm., Legs: 4 pcs., 2 pcs. on wheels

Stock number: D1006, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Table, Size: L 1000 x W 750 x H 740 mm., Legs: 4 pcs. with wheels, Shelf: 1 pc. with drain, Other: With grid-top

Stock number: D1052, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: Table top L 2150 x W 700 mm., For wall mounting: Yes, Sink: Yes, L 880 x W 540 x H 240 mm.

Stock number: D1183, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: 4 pcs. adjustable legs, Tabletop diameter: Ø 1500 mm, Tabletop material: Nylon, Height: H 790 mm, Other: 4 pcs. stabilizer wheels

Stock number: D1003, Table, stainless steel,, with wheels., L 1885 x W 885 x H 900 mm., Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1885 x W 885 x H 900 mm., Legs: 4 pcs., 2 pcs. on wheels

Stock number: D959, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table top, Size: L 1200 X W 800 mm. , Other: With suction grid, L 800 x W 500 mm.

Stock number: D957, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table top, Size: L 1680 x W 800 mm., Sink: L 500 x W 400 x D 200 mm., Other: With ventilation.

Stock number: D693, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hose fluid bed table, Dimensions: L 3750 x W 620 mm, Capacity: Space for 5 pcs hose, Other: Incl. heat, blower, and timer

Stock number: DT067, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Construction: Manuel, Stations: 1 pc., Manufacturer: Diaf, Type: TMA special

Stock number: DT055, In stock: Yes, Amount in stock: 2 pcs., Item: Tablet compressing machine, Theoretical capacity: 760-1520 pcs/min., Stations: 27 pcs. for two-layertablets, Tablet size: Ø 15,8 mm., Working pressure: 6,5 ton., Manufacturer: Manesty, Type: BB3B, Other: The machine has been renovated

Co-ordinate Table HIRSCHMANN - DRO system HEIDENHAIN, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 400x240 mm, T-slots size: 10 mm, Number of t-slots: 4, Longitudinal travel x axis: 300 mm, Cross travel x axis: 200 mm