135,041 used machines on RESALE, but how to find them? Machine Search
Additional technical specifications: • max. negative pressure: 2400 Pa • max. volume flow: 1000 cbm/h
Additional technical specifications: • Number of holes: approx. 1800 • Hole diameter: 16 mm • Accessories: incl. various construction accessories such as clamps
Additional technical specifications: • Secondary short-circuit current: 22.4 kA • Open-circuit voltage: from 1.8 to 3.6 V
TEKA FILTOO Welding Fume Extraction Unit Manufacturer TEKA Model FILTOO Year 2017 Condition untested Location 73529 Schwäbisch Gmünd DE Lot 13
Consisting of various welding wires, including SG ALMg 3; for thicknesses, weights, manufacturers, and types, see pictures.
Additional technical specifications: • Hole diameter: 30 mm • Distance from hole center to hole center: 100 mm
Attention: for all welding technical data see photographed nameplate! Attention: without the gas cylinder seen in the photos
Seriennummer: 978002, Betriebsspannung: 230 V, Frequenz: 50 Hz, Nennstrom: 7 A, Anschluss: 1,1 kW
SOYER BMS-901 Stud welding machine Manufacturer SOYER Model BMS-901 Condition untested Location 35614 Aßlar DE Lot 11
KEMPER Welding fume extraction unit Manufacturer KEMPER Condition untested Location 35614 Aßlar DE Lot 61
Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg
chucking diameter: 315 mm table load: 300 Kg swivelling range: Grad turning speeds: 0,1 - 4,0 U/min connected load frequency: 220 V bore diameter: 63 mm weight: 0,09 t Dimensions (LxWxH): 0,8 x 0,6 x 1,2 m Welding turntable incl. - 315 mm chuck - 3-axis torch holder - Cutting torch - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 14009001500 mm over wi ...
used
Large basket welding machine, Fabr. ZÜBLIN Machine data of the automatic welding machine: - Inner reinforcement diameter range: 1,465 - 4,100 mm - Diameter of the longitudinal wires: 6-10 mm - Number of longitudinal wires: 12 or 24 - Length of cylindrical reinforcement: any mm - Weight of the entire system: approx. 26.0 t - Foundation dimensions: approx. 14.0 x 11.5 m - Basket in basket production possible, i.e. for large-diameter pipes that have to be manufactured with a double basket from a static point of view - This system can also be used to produce baskets with bells
Auction-ID: A1-50275-163
Gedreven Toerental : 60 - 1250 tpm Diameterbereik : 2700 - 6500 mm 4 in stock Max weight on both supports: 25 ton Adjustable in height: yes Number of wheels: 4 Motorpower: 20 kW / 16A Voltage: 3 x 400V Weight: 1290 kg
Travelling base and rails, welding head, controls and flux-handling components A6 Arc Master, LAF 1000, power slides and flux recovery . The column is eccentric, which means that the welding head is always lined up in the centre of the carriage. This to be able to weld round objects with turning rolls on the same rail. The CaB 300S can reach over high and long distances, both vertically and horizontally. The ±180° column rotation facility provides a total action radius. Extension (max mm) 5580
Welding table accessories P-Set 1: 27 pieces, 28 mm system (for 15 mm table thickness), consisting of: Clamps: 5 Sk.100/350 mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175 mm Flat angles: 2 pieces. 350 x 250 mm Flat angles: 2 pieces 275 x 150 mm Eccentric washers 2 pieces 100mm Quick release screws: 10 pcs.Number 33 positions Weight 52 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-50523-876
Various grinding wheels; safety glasses; Wall plate 250x100 cm; welding torch Auction-ID: A1-49889-153
Oxy-fuel; with various running rails; with swivel arm for gas hoses; Total length approx. 5 meters. Auction-ID: A1-49889-119
Blade thickness: 35mm. Not included the goods on and under the welding table Auction-ID: A1-49889-208
Welding table / hole table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 4000 mm Table width 2000 mm Hole diameter 28 mm Table height 815 mm Machine weight approx. 1.3 t Auction-ID: A7-50523-807
Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side bolsters 165mm height adjustable from approx. 840 - 890mm Ribbed underside for reinforcement. incl. floor bearing Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included Table length 1200 mm Table width 800 mm Table height 840 - 890 mm Machine weight approx. 0.3 t Condition: never used / new (5) Auction-ID: A7-50523-796
Blade thickness: 40mm, equipped with 2 steel trestles. not included the goods on the welding table Auction-ID: A1-49889-201
Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side walls 165mm Ribbed underside for reinforcement. incl. floor bearing accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. - with drawer unit - grid shelf - heavy-duty castors steerable Faded welding accessories not included Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Dimensions L x W x H 2.4 x 1.2 x 0.95 m Condition: never used / new (5) Auction-ID: A7-50523-820
mobile welding lifting table / hole table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 1200 mm Table width 800 mm Hole diameter 28 mm Table height 450 - 800 mm Load capacity 500 kg Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-50523-759
Welding table / hole table with accessories: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side bolsters 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor bearing Pictured accessories included! Surface flatness 0.2 - 0.4mm on 1000mm. Very stable base, so the table can be moved with pallet trucks. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t without pallet truck Condition: never used / new (5) Auction-ID: A7-50523-770
Oxy-fuel; with various running rails; with swivel arm for gas hoses; total length approx. 5 meters; 3x safety transformer, various hoses Auction-ID: A1-49889-121
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side bolsters 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor bearing Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included Table length 2990 mm Table width 1490 mm Table height 850 - 900 mm Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-50523-791
Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 pcs clamps clamping height 300mm, projection variable 8 pcs clamping bolts 2 pcs stop 100mm 4 pcs stop 150mm 2 pcs stop 225mm 1 piece torch holder 1 pc hole brush 30mm 1 pc release lotion 500ml 1 pc welding table cleaner on a natural, biological basis 500ml Number 24 positions Weight 22 kg Auction-ID: A7-50523-832
General Description Handheld fibre laser welding system manufactured by Bodor / Jinan Bodor CNC Machine Co., Ltd. , model BodorWelder 1500 Pro . Compact 1.5 kW laser welding system designed for manual precision welding of sheet metal and fabricated components. Supplied with a Bodor BF600 automatic wire feeder. Technical Details Manufacturer: Jinan Bodor CNC Machine Co., Ltd. Model: BodorWelder 1500 Pro Machine type: Handheld fibre laser welding machine Laser output: 1,500 W Integrated self-cooling system Handheld Bodor laser welding gun Touchscreen operator control Automatic wire feeder: Bodor BF600 Wire feed speed: 15–600 cm/min Wire feeder supply: 100–240 VAC, 50/60 Hz Wire feeder power: Max. 85 W Standard feeding-wheel sizes: Ø0.8/1.0 mm and Ø1.2/1.6 mm Maximum wire spool weight: 20 kg Suitable for stainless steel, carbon steel and aluminium Gas connection Et ...
Oxy-fuel; with various running rails; with swivel arm for gas hoses; Total length approx. 5 meters. Auction-ID: A1-49889-172
Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs quick clamping bolts 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 100mm 2 pcs stop and clamping angle 175mm 2 pcs stop and clamping angle 275mm 2 pcs prisms 60mm 1 pc eccentric stop 100mm diameter 1 pc torch holder 1 pc hole brush 30mm 2 pcs release lotion 500ml, on natural, biological basis 2 pcs. welding table cleaner 500ml, on natural, biological basis Condition: never used / new (5) Auction-ID: A7-50523-858
Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs quick clamping bolts 2 pcs universal stop 100mm 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 300mm 2 pcs stop and clamping angle 75mm 4 pcs stop and clamping angle 175mm 4 pcs stop and clamping angle 275mm 2 pcs prisms 60mm 1 pc torch holder 1 pc eccentric stop 100mm diameter 1 pc. hole brush 30mm 2 pcs. separating lotion 500ml, natural, bio-based 2 pcs. welding table cleaner 500ml, natural, bio-based Condition: never used / new (5) Auction-ID: A7-50523-868
Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side bolsters 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor bearing accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. Very stable base, so the table can be moved with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-50523-766
Blade thickness: 35mm. Not included the goods on the welding table Auction-ID: A1-49889-207
Blade thickness: 50mm. Not included the goods on the welding table Auction-ID: A1-49889-200
Blade thickness: 40mm, equipped with 3 steel trestles, length: 2990mm. Not included the goods on the welding table Auction-ID: A1-49889-203
Top thickness: 20mm, equipped with 2 steel supports, length: 2500mm. Not included the goods on the welding table Auction-ID: A1-49889-202
1x unused Abicor Binzel mig torch; 1x gas pressure regulator; 2x opened roll of welding wire; 2x used mig torches; 1x welding helmet with carrying bag Auction-ID: A1-49889-123
HS DIALOG Digital control Control: Dialog touch 12\" incl. two sonotrodes (1:2 and 1:0.4) incl. additional control Dialog touch 12\" Instruction manual available Auction-ID: A1-50529-13
Blade thickness: 35mm, equipped with 3 steel supports, length: 2500mm. Not included the goods on the welding table Auction-ID: A1-49889-199
Basic set 2 / 32 pieces for table top thickness 15 and 25mm 6 pcs screw clamps 12 pcs quick clamping bolts 2 pcs universal stop 100mm 4 pcs universal stop 150mm 2 pcs universal stop 225mm 2 pcs stop and clamping angle 175mm 1 pc hole brush 300mm 1 pc torch holder 1 pc non-stick spray 500ml, on natural, biological basis 1 pc welding table cleaner 500ml, on natural, biological basis Condition: never used / new (5) Auction-ID: A7-50523-845
maximum number of results exceeded
please refine your search
