welding roller used for sale

table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :

WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST WE CAN DO IT WITH ADDITIONAL OFFER

Manufacturer: FANUC Type of Machine : Welding Robot Condition: Used Fanuc ArcMate 0 iA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Lasrookafzuiginstallatie die kan worden aangesloten op de afzuigbuizen in uw gebouw. Type: WD 40-20

System Components: Main Control Cabinet - Voltage: 3 × 400 V ±10% - Frequency: 50 Hz - Rated Power: 34.2 kVA - Current: 49.4 A - Fuse: 80 A (gG) - Protection: IP 54 - Type: RCE - Weight: 500 kg - Year: 2020 - Standards: EN 60204-1, EN 61439-1/2 Positioner / Workpiece Manipulator - Type: RPT_05000AR6D PL - Weight: 1800 daN - Year: 2020 - Enables PA/1G optimal positioning - Rotational Axes: 7 - Repeatability: ≤ 0.15 mm Dust Extraction Unit - Model: Dustec 4 XL - Power: 5.5 kW - Voltage: 400 V / N / PE - Air Supply: 6 Bar - Filter Class: M - Year: 09.2020 Welding Technology - Process: MAG (1-wire) - Wires Supported: Solid and flux-cored (Ø 1.0–1.6 mm) - Arc Modes: Short, spray, pulse, long - Power Source: Fronius TPS 600i - Process Optimization: Task-specific Robot & Sensor Periphery - Automatic torch changer - TCP calibration - Internal variable access for diagnostics - On ...

lasmanipulator elektrische tafelrotatie handmatig kantelen van de tafel

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

This 6-axis PANASONIC TA-1800 robot welding cell was manufactured in 2012. It features a maximum reach of 1796 mm, providing flexibility for various welding applications. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800 robot welding cell we have for sale. Contact us for further details.

Welding robot manufactured in 2012. This CLOOS C50 welding cell features a QRC 350 robot model and includes a Qineo Pulse 450 welding power source. The system is equipped with a linear track axis configuration, mechanical torch cleaning station, and dual-station components. It also has protective safety enclosure fencing and rotatable workpiece positioners. If you are looking to get high-quality welding capabilities, consider the CLOOS C50 welding cell we have for sale. Contact us for further details.

Welding robot manufactured in 2004. This ABB IRB 2400L Welding Cell features a robust design with a positioner model ABB IRB 500R and includes Fronius TPS 4000 welding equipment. It comes equipped with essential safety features such as a light curtain and safety fencing. If you are looking to get high-quality welding capabilities, consider the ABB IRB 2400L Welding Cell we have for sale. Contact us for further details.

This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details.

The machine is in perfect condition It comes exactly as you see in the photos and is 100% working

MIG-MAG Welding Machine EWM WEGA 400 MIG DW EWM HIGHTEC WELDING GmbH. Made in Germany. Welding current 50- 400 A. Welding voltage MIG 16.5 - 34 V. Max. welding current at: 45%ED (40°C) 400 A. Max. welding current at: 100%ED (40°C) 265 A. DV case WEGA DRIVE 4. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG MAG Welding Machine EWM WEGA 400 MiG DW – Shielded Gas Welding Machine - MIG/MAG Welding Machine

MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 2-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck,  ...

MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 4-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck,  ...

gt;gt; Esab A6 GMD lasnaad volgsysteem De A6 GMD lasnaad volginrichting wordt gebruikt voor het positioneren en volgen van lasnaden van automatische lasmachines met alle soorten lasnaden waarbij een geleidingsrand aanwezig is die de sensorvinger kan volgen. De inrichting is ontworpen voor standaard ESAB-geleidingen en kan één of twee servomotoren tegelijk aansturen. gt;gt; Esab LAE 800 amp DC-bron De LAE-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poederdek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 18 meter lengte beweging Afmetingen van de kraan zelf: 2800 x 2600 x 3300 mm

gt;gt; Esab A2-A6 procescontroller Selecteerbaar lasproces met vooraf ingestelde lasparameters (geheugen voor 255 parameterreeksen). Constante stroomsterkte of constante draadsnelheid. Zeer gebruiksvriendelijk. gt;gt; Esab LAF 800 amp DC-bron De LAF-serie bestaat uit driefasige, ventilatorgekoelde DC-lasstroombronnen die zijn ontworpen voor zeer productief gemechaniseerd poededek lassen of zeer productief MIG/MAG-booglassen. De toepassing betreft poederdek lassen. Het apparaat is verplaatsbaar op rails. 16 meter lengte beweging Afmetingen van de kraan zelf: 3200 x 2300 x 4000 mm

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

Welding table 2000 x 1000 x 850 mm

weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm drive motor: 2 x 0,55 kW total power requirement: 1,1 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laservall 3,5 KW KUBO 100 EVO KE100E0109 Bouwjaar: 2009 Mitsubishi Control Microscoop voor het repareren/lassen van kleine onderdelen

This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information.

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

DEM GP4520 APM angle welding machine with shrink tunnel - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl DEM GP4520 APM angle welding machine with shrink tunnel Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines DEM GP4520 APM angle welding machine with shrink tunnel Price: 5000 EUR Download PDF DEM GP4520 APM angle welding machine with shrink tunnel Production France. The device is in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery, wherever we want to elegantly package the goods we sell. Automatic operation, just put the goods  ...

HIGH PRODUCTION BABCOCK ROLLERS DRYER

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pallet roller conveyor/ roller conveyor/ pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive Plant consisting of: 12 segments 9x approx. 5.75 meters in length 1x approx. 5.30 meters in length 1x approx. 2.00 meters in length 1x approx. 0.95 meters in length Each element is equipped with its own motor. Total length: approx. 60 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roll diameter: approx. 80 mm Axes/roller spacing: approx. 80 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: blue Pallet guide included Including SEW motors 1.1 KW Includes feet - height adjustable Price per meter  ...

Brand new, never used. Belt size (mm): 600 x 1300

Spiked roller WEHRMANN for better gluing on solid wood / plywood

Dimensions (L/W/H): 1650x460x120 mm Weight: 31 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible.

Description Item # 8085 – MINI CONBAR FORMING ROLLERS Manufactured by SOLLICH Mini-Conbar Forming Rollers, Year 2014, in excellent like new working condition, very little use. Including Paper Reel Feeder, 1st Roller is 280mms wide x 320mms diameter, 2nd Roller is 320mms wide x 480mms diameter. Also includes a SOLLICH FKL-S 15 Chiller Unit, Year 2014, supplying cold water to the drums for cooling.

Description Item # 9319 - BAR FORMING/EXTRUDING ROLLERS Manufactured by LEKOS (Slovakia) Model EXT-1020 Year 2016 1000mms working width SIEMENS Simatic HMI Plc Controls Set of Three (3) Forming Rollers (vertically stacked) Previously being used for Nougat Mass, Caramel, Syrup Layer Including Supporting Frame, Extruding Rollers, Cooling/Heating of the Rollers, Height adjustment of the top & middle roller, Mass Scrapping Mechanism, Mass Greasing Mechanism, Extruder Mass Storage Top Roller with 440mms diameter, Other Two Rollers with 630mms diameter Top Two Rollers can be adjusted, Bottom Roller is fixed Product thickness can be adjusted from 0 up to 30mms thick With Cold water Glycol Cooling Unit, to cool the rollers Still set up in the factory but no longer in production overall dimensions: 2851mm high x 1490mm deep x 2630mm wide weight: 3100kg

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter -Rollers Central ratchet lever -with: Cutting head R1 -Dimensions: 500/85/H80 mm -Weight: 2.6 kg

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

MAJA PART NUMBER : 515-0422 TRANSPORT SCRAPER ROLLER Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Year of construction 2023 Anilox roller with 120 lines/cm suitable for Heidelberg XL 106 Anilox roller with 100 lines/cm Scoop volume 10 ccm hexagonal Angle 60° Delivery date: immediately Price on request. We deliver and install worldwide!

SPECIFICATIONS: Machining width: max. 1300 mm Processing thickness: max. 80 mm Installed power: 9 kW 01 Low Pressure Pump 04 Painting units COMPOSITION: AGGREGATE I Dosing Unit Steel roller Speed adjustable via the CN control Power: 0.75 KW Speed: 1400 rpm AGGREGATE II Applicator Roller: Ø 250 mm rubber Power: 0.75 kW Speed: 1400 rpm AGGREGAT III Filler Steel roller Power: 0.75 KW Speed: 1400 rpm AGGREGAT IV Dosing Unit Steel roller Power: 0.75 kW Speed: 1400 rpm Control: SORBINI

Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

Air cooler, evaporator, cold storage, refrigerated container, cold room -Number: 2x fans 0.58 kW 1200 watts -Weight: 16 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1- 2 inch -Weight: 6.5 kg