welding roller used for sale

Including electrodes, welding hoods, welding torches and welding aprons

Rated Input Voltage: 3P AC380V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 85% Insulation class: F Protection class: IP21 Weight: 43 kg Insulation value: F Protection value: IP21 MIG TIG MMA - Input power (KVA) 13.8 10.5 11.8 - Input current (A) 21 16 18 - No-load voltage (V) 80V 80V 80V - Output current (A) 40-350 10-350 30-300 - Output voltage (V) 31.5 24 32

Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;

BODE TT60 welding positioner is used for the manipulation of a workpiece with a maximum weight of 3000 kg during the welding process. The device makes it possible to work in the optimum position, thus contributing to improved welding quality. The versatility combined with perfectly thought-out design solutions make the BODE welding positioner guarantee safe handling and trouble-free operation for many years of use. Technical specifications of the BODE TT60 welding turntable - maximum workpiece weight: 3000 kg - table diameter: 2800 mm

Sold without central suction block (disassemble at the level of the first aluminum pipe).

KAWASAKI RA006L robotic welding station is used for precision welding of workpieces using the MIG/MAG method. The station, equipped with two independent welding tables, is protected from the inside with SICK safety curtains and from the outside with double doors with safety locks. Next to each door is a control panel, with a safety switch and other necessary buttons. The welding station is complete and consists of the following parts: – robot arm: KAWASAKI RA06L – controller: KAWASAKI E controller E40 – MIG/MAG welder: KEMPPI KempArc SYN 300 – wire feeder: KEMPPI KempArc DT400 – manual welding table 2×1 m (2 pcs.) – safety curtains: SICK – cooling device: KEMPPI KempCool 10 – cleaning station: ABICOR BINZEL BRS-CC – KEMPPI and ABRICOR BINZEL welding accessories – anti-blinding shields – inductive sensors: SICK – door bolts and stops: SICK – cont ...

Inv. Num. : 8310 Type: S8 Robo Mig XT Producer: Lorch Generated: Parameters: Maximum arm reach: 1951 mm Number of axles: 6 pieces Maximum load capacity: 5/10 kg Robot travel: 4700 mm Application A: 2251 mm Areas of application B: 1951 mm Areas of application C: 49 mm Areas of application D: 1257 mm Areas of application E: 986 mm Equipment: Technical documentation Parts of the workplace: Comau Arc Robot 4.5.1945 Lorch S8 Robo Mig XT Welding Machine Anti-collision device Burner cleaning station 2 orbital positioning stages Horizontal Positioning Table Gudel Travel System Switchboard SAFETY safety system

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

FANUC Arc Mate 100iC robotic welding station was built in 2019. The system configured for fully automatic MIG/MAG welding of workpieces is the perfect solution for the production of e.g. electrical cabinets, metal structures or agricultural equipment. The machining process is performed by a powerful industrial robot which, in combination with a rotary table, enables the machining of workpieces with even the most complex shapes. All the components of the workstation are integrated inside a single structure, making it easy to install or reposition. The MOTOFIL ROBOTICS MONOBLOC MCT1110 robotic welding station consists of the following parts: – robot arm: FANUC Arc Mate 100iC – controller: FANUC SYSTEM R-30iB – welding source: KEMPPI A7 MIG Power Source 450 – welding positioner – wire feeder: KEMPPI A7 MIG Wire Feeder 25-LH-EUR – ABICOR BINZEL torch cleaning device with ...

Machine Type: Electrode Inverter Welding Rectifier without bi-power device Make Merkle Type MobiARC 284 cel Appendix No. 103.101 Connection voltage 3 x 400 volts Adjustment range 20 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter through built-in fan Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 9 years Connection for hand and foot remote control Condition workshop tested, very good, incl. UVV test protocol Scope of supply welding system with the following accessories: 1 piece of electrode cable 1 piece ground cable 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 pcs rod electrodes ...

Specifications: - Max. load capacity 5000 kg - Max. clamping diameter 1800 mm - Face plate dimensions 1200 x 1200 mm - Rotary movement electr. Infinitely variable - Right + Left – Run - E. - Remote Controller - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg

Note: The pictures serve to illustrate the material. - The workbench frames are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Borehole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,250 mm Particleboard depth: approx. 700 mm Surface: coat ...

Welding machine, fully functional

One used EVG LGR wire mesh welding lines for the production of fencing mesh and industrial mesh mesh width: min 500mm and max. 2.150 mm mesh length:min 600 mm and max. 3,000 mm cross wire separacion: min. 12.5 mm and than steplessly line wire separacion: min. 25 mm and than steplessly Working range: min. 2.0 mm and max. 6.0 mm No. of line wires: 52 pc Production speed: 150 cw/ min intalled power at 50%ED: 840 kVA Stacking height: max. 600 mm

Double Column Rotary Positioner with Lifting Device Lg.Nr. 25138 Specifications: - Max. load capacity per stand 4000 kg - Total load capacity max. 7000 kg - Travel / stroke 1780 mm - Lifting speed 1600 / 2800 mm/min - Rotary movement electr. adjustable - Right + Left – Run - Drive 400 V - Space requirements requested. Unit approx. W 1500 x H 4000 x D 1500 mm - Space requirement for moving unit W 1300 x H 4000 x D 1300 mm - Weight driven unit approx. 4000 kg - Weight running unit approx. 2500 kg

Lg.Nr. 25075 Mot. Welding rotary and tilting table Specifications: - Load capacity 1000 kg - Face plate diameter 800 mm - Face plate can be tilted by motor - Rotary movement electr. infinitely variable 0 - 250 cm/min - Welding current transmission 650 A - Drive 400 V / 2.8 kW - Table height in horizontal position approx. 1100 mm - Re- + counterclockwise rotation - Space requirement approx. W 1200 x H 1100 x D 1500 mm - Weight approx. 850 kg

Fully functional welding machine

Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Inv. Num. : 8389 Type: 2x ABB IRB 2400L Producer: Robolution Created: 2006 Parameters: Control system: IRC5 Door height: 2800 mm Door opening: 2800 x 2200 mm Machine weight: 5500 kg Height: 2200/3100 mm Width: 3750 mm Length: 5700 mm Equipment: Touch Screen The robot cell consists of: 2x ABB IRB 2400L Robot 2 x lathe (robot welding on one side of the table and the operator loads the material on the other side of the table) Welding power sources: 2x Fronius TPS 4000 Equipment for welding wires with diameters of 1 and 1.2 mm Burner

Weld edge former INDUMASCH SIEGEN Type V 12Masch. No.: 50674 Year of construction 1992Material thickness max. 40 mmChamfer angle 45Working speed approx. 3 m/min. Motor power 2 kWNetz connection 400 Volt, 50 Hz- Flow / return- Built-in guide roller for chamfer angle 45- Belt guard missingDimensions L x W x H 650 x 600 x 650 mmWeight 75 kggood condition; used

A Branson ultrasonic welding device is available. Frequency: 20kHz, power: 900W, stroke: 100mm, clamping force at 690kPa: 1.96kN, dynamic release: 67N-734N. Documentation available. On-site inspection is possible.

Welding turntable ESS type DT 50Fabr. No. 86 / 1125 Year of construction 1986Load max. 50 kgFace plate diameter 300 mmFace plate speed 0.19 to 5.7 rpm. Control voltage 24 voltMotor power 100 wattsMains connection 220 volts, 50 Hz.- Face plate in the position infinitely variable swivel by 180- Speed control via rotary potentiometers- Clockwise, counterclockwise rotation- Foot switch- 2-stroke and 4-stroke operation- Sliding contact for the mass up to 200 Amp.- New control ESS PS3 from year of construction 2009Space requirement L x W x H 600 x 500 x 350

Welding Fume Extraction, Soldering Extraction, TBH Type LN 230High Vacuum Filter Device, Laser Extraction, Laboratory Extraction, Extraction System, Filter SystemFabr. No. 230717 year of construction 2018Volume flow 320 m3/hEffective volume flow 50 to 250 m³/hstat. Pressure 20000 PaMotor power 1.1 kWNet connection 230 volts, 50 Hz- stepless suction power regulation via the control electronics on the device- upper part of the housing with several extraction connections 100, 80 and 2x 50 mm- mechanical air filter with approx. 99% separation efficiency- 1 piece filter 300 x 300 x 225

An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible.

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machin ...

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible.

A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible.

A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible.

current capacity: . kVA number of controlled axis: . workpiece weight: . kg : 50 zehn verschiedene Vers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

sheet width: . mm plate thickness: . mm serial number: 20719 total power requirement: . kW weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

length: NA mm height: NA mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

length: 0 mm height: 0 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Ultrasonic Welding Machine for Plastic Articles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, 4th head: possible. Inner workpiece diameter min./max.: 600mm/4500mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible.

A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, workpiece inner diameter min./max.: 600mm/4500mm, max. workpiece length: 12700mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible.

Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible.

table length: 1200 mm table width: 800 mm table height: 900 mm table load: 2000 Kg weight of the machine ca.: 0,24 t dimensions: 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

table diameter: 1500 mm table load: 5,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 10000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,5 + 3,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.