127,266 used machines on RESALE, but how to find them? Machine Search
One used high performance mesh welding line for standard mesh This lines is feeding cross and line wire off spools directly Max working speed are 180 cross wire/min Complete line from line wire pay offs up to turning ans stacking unit. Further equipment ( spools, butt welder , main transformer etc.. and cold rolling lines ) can be offered as well
One used mesh welding line for standard and special mesh. Line wire feed from spools, coils or reels; straightening units, line wire pull-off and compensating mechanism; welding machine with roller advance feed; Cross Wire Disc Feed; Line Wire Shear; mesh turning and stacking unit This line is equipped as well with line wire pay off for spools. Extras: Spools ( 3 tons ), main trafo, compressor, butt welding machines and cold rolling line
including welding torches; Suction hose and various parts Auction-ID: A1-43332-115
One used mesh welding line for standard mesh working line- and cross wires off spools, mainly exesting of: Line wire feed from spools, straightening units, line wire pull-off and compensating mechanism ( loop ), Roller Advance Feed, cross wire feed with disc insertion from spools, welding machine, Line Wire Shear mesh turning and stacking unit tying system for the mesh packages Extras: Spools Spare part package Butt welder
Please note! Needs to be checked Auction-ID: A1-43332-79
table diameter: 180 mm : 10 Kg : 5 Kg chucking diameter: 65 mm turning speeds: 2 - 20 stufenlos swivelling range: 90 Grad tilt adjustment: manually/mechanicall: manuell connected load frequency: 230 V weight of the machine ca.: 18 Kg dimensions of the machine ca.: 300 x 300 x 300 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 19013 Specifications: - Rated power at 50% ED 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Weld values sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm spacing 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water volume approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Hanging bracket with gimbal
Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg
Offer 17230 Specifications: - Load capacity 3600 kg - Face plate diameter approx. 1050 x 1050 mm - Face Plate mot. swivel + swivel - Face plate speed electr. infinitely variable 0.2 - 1 rpm -Mot. Right - + Left - Run - Handheld remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg - Handheld remote control
Offer 24037 Specifications: - Max. load capacity 150 kg - Face plate diameter 800 - min. table height in horizontal position approx. 600 mm - Max. table height in horizontal position approx. 1100 mm - Face plate hydraulically infinitely variable swivel or tilt - Right + counterclockwise rotation of the face plate - Rotary movement electr. hydt. adjustable - Welding current transmission approx. 500 A - Drive 400 V - Connected load approx. 0.75 kW - Space requirement approx. W 1700 x H 1450 x D 1000 mm - Weight approx. 900 kg
Attention: for all other welding data, see photographed nameplate Auction-ID: A7-46287-55
Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T
Offer 24228 Specifications: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E. - Welding cable - Ground cable -Trunk - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg
Available quantity: 2 systems Year of Make: 2019 Weight: 6021 kg Rated current: 20 A Connected load: 12 kVA Disk laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and determination: PRIMES FocusParamaterMontitor (FPM) Laser source: Trumpf TruDisk 5001 Welding fume extraction: HERDING Comp 1500-8/9 SB Year of extraction: 2018 Extraction volume: 2000 Bm³/h Included: HERDING Multicoater_MCI 55/1 dosing device for adding additives to the filtration process Enclosure cooling: RITTAL SK 3185830 The system was used to produce batteries.
Inv. Num. : 8259 Type: S5-A701S Producer: EPSON Created: 2010 Parameters: Control system: EPSON RC 180 Maximum arm reach: 786 mm Axle number: 6 Machine weight: 36 kg
Machine type: MIG/MAG welding machine Make MERKLE Type ME 282 LK N Connection voltage 3 x 400 volts Adjustment range 40 – 280 amps Duty cycle 15% ED at 280 amps 60% ED at 200 amps Current setting 7 switching levels Point and interval setup Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 885 x 375 x 590 mm Weight 80 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable permanently mounted 1 piece pressure reducer 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts box complete Equipped 1 can of ME 4000 non-stick spray 1 Piece ...
Miller Maxstar 200 TIG Welding Machine; TIG version. Auction-ID: A1-45170-44
With earth clamp and electrode holder Auction-ID: A1-45170-102
With earth clamp and electrode holder Auction-ID: A1-45170-99
Robot welding cell incl. positioner Hydraulic 3D welding table ABB max. workpiece weight 2 tons and max. diameter 1400 mm Robot IRB 4600 M2004 Welding torch system Wire Select 2.0-Vers.LSQ5/Q80 with 2-fold wire feed Thielmann gas nozzle cleaning device Protective housing with door for robot welding cell
With earth clamp and electrode holder Auction-ID: A1-45170-100
Unused in box Auction-ID: A1-45170-55
Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...
Unused in box Auction-ID: A1-45170-52
ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz
weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
length:1200 mm height:800 mm weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
maximum number of results exceeded
please refine your search
1 € 
