welding roller used for sale

Manufacturer: Giardina Lackwalze 1450 mm 30 shore gerillt Neu, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Creasing on a 1 cm: gerillt, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Riss,

Manufacturer: Giardina Lackwalze 1450 mm Poore Neu NeuGiardina, Spare roller: Öl Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: schleifen,

Manufacturer: Giardina Lackwalze 1450 mm ca 35 shore muss geschliffen werden, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

Manufacturer: Hymmen, Type: TLX 1,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Year :1982

Manufacturer: Bürkle Walze 1336 mm D= 220 Stahlkern 220, Roller rubber coating: yes, Rubber coating length cm: 1336, Shore Härte: ca 45, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 220,

Ersatzwalze für: TLX, Hymmen: yes, Gummiert Walze: yes, Gummierte Länge cm: 1400, shore Härte: ca.35, Stärke Gummierung ca. mm: 20, Stahkerndurchmesser ca. mm: 215, EPDM: schwarz,

Spare roller: ELX und TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20 Schwarz, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Gummiqualität : neu,

Manufacturer: Bürkle Gegendruckwalze Spachtelmaschine 1400 mm 185 Durchmesser, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 52, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Bürkle Gegendruckwalze SLC 1300 neu Gummiert shore 80, Bürkle: yes, Rubber coating length cm: 1300 mm, Approx. thickness of rubber coating in mm: ca,7 mm, Stahlkerndurchmesser ca. mm: 170,

Manufacturer: Hymmen Stahldosierwalze Chromwalze 1400 mm 197 Durchmesser, Hymmen: yes, Roller rubber coating: Chrom, Approx. thickness of rubber coating in mm: Stahl 1400 mm, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Bürkle Stahldosierwalze 174 mm Länge 1416 mm muss verchromt werden, Bürkle: yes, Stahlkerndurchmesser ca. mm: 174 mm, Total lenght mm: 1416,

Manufacturer: Purete, Type: Doppellackwalze, Year: 2017, Control: Schilin, Program: yes, Work piece width min-max mm: 30-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Working height: 890, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: ca.1,5, Auftragswalzengeschwindigkeit m/min min-max: regelbar, Gummierte Auftragswalze(n): yes, Shore: 40, Double rubber coating: ca.60, Dosierwalze verchromt: yes, Year :2017

Manufacturer: Purete, Type: PRT-R2113AM Doppellackwalze, Year: 2017, Control: Shillin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Conveyor: Band, Einbaulänge UV mm: 2000, Compressed air bar: 6, FREE TEXT: Bilder sind keine Orginal-Fotos Maschine ist nicht benutzt worden, Year :2017

Manufacturer: Hymmen Lackwalze für TLX Länge mm 1400 shore 60 Walze muss geschliffen werden, Spare roller: TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 60, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Rubber coating defective: yes,

Manufacturer: Hymmen Lackauftagswalze, Bürkle: yes, Rubber coating length cm: 1398, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Sponge rubber: yes,

Manufacturer: Bürkle Walzenkern 1415 mm shore 65 gumm 12 mm, Bürkle: yes, Roller rubber coating: yes, Shore Härte: 60, Approx. thickness of rubber coating in mm: 12, Stahlkerndurchmesser ca. mm: 197, EPDM: Poleurethan,

Manufacturer: Hymmen, Type: TLX - M, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Hymmen, Type: TLX-M1, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M1.0, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Bürkle Lackauftragswalze 1416 mm shore 35 gerillt Zustand gut, Spare roller: SLC DAL, Bürkle: yes, Roller rubber coating: yes, Shore Härte: 35, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 189, Creasing on a 1 cm: ca.80, Wedge follower: yes,

Manufacturer: Bürkle Chromwalze beheizbar 1416 mm/184, Spare roller: SLC 1300, Bürkle: yes, Roller rubber coating: no, Shore Härte: ca 60, Total lenght mm: 1416,

Manufacturer: Bürkle Stahldosierwalze 1415 mm 234 Durchmesser, Spare roller: Spachtelwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1300,

Manufacturer: Bürkle SLC Dosierwalze 1416 mm Neu 174 Durcmesser mm Beheizbar, Spare roller: Dosierwalze, Bürkle: Neu, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1416 mm, : SLC, : 174, : Chrom,

Manufacturer: Bürkle Gegendruckwalze 1300 mm 8 mm Gummi shore 80 muss geschliffen werden, Bürkle: JA, Roller rubber coating: yes, Rubber coating length cm: 1300, Shore Härte: ca.80, Stahlkerndurchmesser ca. mm: ca.170,

Manufacturer: Hymmen, Type: TLX M, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hymmen, Type: TLX M2, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Cefla Transportrollengang, Type: TF, Year: 1998, Working widht mm: 1300, Total hight mm: 900, Adjustable: yes, Roller pitch mm: 130, roller diameter: 80, Feeding speed min-max m/min: 5-20, roller diameter: 80, Antrieb verstellbar: yes, Handverstellung Vorschub: yes, Working widht mm: 1300, Conveyor speed m/min: 5-20, Drive power kW: ca.1,0, Year :1998

Manufacturer: Venyeskob, Type: Transportrollengang, Year: ca.1995, Working widht mm: 1300, Total hight mm: 950, Roller pitch mm: 150, roller diameter: 80, Length mm: 2500, Driven: yes, Working widht mm: 1300, Conveyor speed m/min: 5-25, Year :ca.1995

Manufacturer: unbekannt, Year: ca.1995, Total metres approx.: 2500, Working widht mm: 940, Total hight mm: 970 -100, Adjustable: yes, Roller pitch mm: 200, roller diameter: 80, Driven: yes, Working widht mm: 940, Conveyor speed m/min: ca.15, Drive power kW: 0,5, Year :ca.1995

Manufacturer: Hymmen, Type: TLX-M, Year: 1991, Control: yes, Operating side: rechts, Arbeitshöhe: 850, Stain roller: yes, UV-laquer roller: yes, Widht of roller coater: 1350, Widht of metering roller: yes, Attachment bracket roller: yes, Reverseantrieb: yes, Rakeleinrichtung: yes, Werkstückdicke max mm: 80, Work piece length min mm: 250, Feeding speed min/max: 6 - 40, Roller lift out: yes, Hight adjustment by engine: yes, Transportart: Band, Pump system: yes, Compressed air bar: 6, Wight approx. kg: 2000, Required space L x W x H mm: 940 x 2350 x 1600, Year :1991

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1889 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports, End stop included Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...

Roller mill BÜHLER MDDP 1000 x 250 2 x longitudinal corrugations/threads Geared motor, SPB 355-4, Gearbox with timing belt Knife scrapers Good condition

Mecalux roller conveyorRoller conveyor 1950-540-450 RA1927 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1950 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1950 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e- ...

Dematic roller curve right 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 830 Nominal / outside width in mm: 600 Roll width in mm: 540/450 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or ...

Dematic roller curve left 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° counter-clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 830 Nominal / outside width in mm: 600 Roll width in mm: 540/450 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by p ...

We offer roller shells made of chilled cast iron, nodular cast iron and chrome steel. The production is carried out according to your technical requirements and drawings. Of course, the corresponding certificates will be provided.

sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FAS roller conveyors 9000-410-350 RA2404 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3x3000 mm = 9000 mm Roller width (RB): 350 mm Nominal/outer width (NB): 410 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 9000 Nominal / outside width in mm: 410 Roll width in mm: 350 Roll division in mm: 62,5, 130 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with t ...

FAS roller conveyors 3000-710-650 RA2403 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: good (used) Conveying length in mm: 3000, 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000, 16000, 17000, 18000, 19000, 20000, 21000 Nominal / outsi ...

FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 2000, 3000, 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000, 16000, 17000, 18000, 19000, 21000 Nominal / outsid ...

0: 3000 mm Working width: 460 mm Wheel width: 460 mm roll diameter: 90 mm 0: 6 St. work height max.: 460 mm weight: 280 kg dimensions of the machine ca.: 3,05 x 0,75 x 0,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross transport trolley for rails + scissor lift table with castors Brand: WTT Length 3000mm

The roller drum was used as a coater for spraying granules. The drum is designed in V2A and has a length of 2400 mm with an inner diameter of 890 mm. The base was sandblasted and repainted.

Assembly line with 4 assembly stationsRoller conveyor made of aluminium system profile and INTERROLL metal rollersVery universally applicable due to modular elements and assembly pallets 400x700 mmRoller conveyor elements made of aluminium system profile MiniTec - like BOSCH REXROTHExperium height: 815 mmComplete length: 13250 mm4 pieces Longitudinal roller conveyor: usable width 405 mm, length 2500 mm, overall width: 510 mm, 16 rollers each3 pieces transverse roller conveyor: usable width 705 mm, length 1000 mm, width: 810 mm, 10 rollers each1 piece transverse roller conveyor: Usable width 705 mm, length 2500 mm, overall width: 810 mm, 30

IMA MEINERT roller conveyor was built in 2020 in Germany by IMA Meinert. The machine is designed to transport sawn timber between successive stages of production. It enables the smooth movement of wooden elements between machining machines, sorting stations and storage areas without the need for manual handling. The sawn timber is transported by a roller system, which provides stable support for the elements along the entire length of the machine. The conveyor system consists of a 6,8-metre-long roller conveyor and a roller turntable, which enables the change of movement direction. This solution improves the organisation of internal transport, maintaining the continuity of the production process. All this makes the IMA roller conveyor an excellent solution for increasing production efficiency in sawmills and woodworking plants. Technical specifications of the IMA MEINERT conveyor s ...

Mobile Laboratory Equipment Trolley / Instrument Trolley on Casters For sale is a sturdy used equipment truck from company laboratory stock. Suitable for holding laboratory equipment, measuring instruments, analysis equipment, computers, printers or other technical equipment. Equipment: Stable metal construction Large upper device/work surface Pull-out middle shelf Additional lower shelf Height-adjustable shelf 4 swivel castors Lateral hole grid for height adjustment Dimensions approx.: Width: 60 cm Depth: 48 cm Height: 85 cm Condition: Used condition with signs of wear due to age and use. The car is stable and fully usable. Scope of delivery and condition according to pictures. Location: 71254 Ditzingen-Heimerdingen, Germany. Price: 99 € net VB plus VAT Preferably pick-up. Prior sale and errors excepted.

sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.