welding positioner used for sale

Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool; 8165

current capacity: 76 kVA throat: 0 mm contact pressure capacity: kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Spot Welder mobile, 76 kVA-50%,117 kW Connecting Load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unused in the package.

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Inverter Welding Machine Brand: POWERMAT Specifications: . Welding Method: MMA . Power supply: 230 V / 50 Hz . Power consumption: 5.8 kVA . Welding Current Range: 20 - 140 [A] . Welding current, 100% duty cycle: 108 A . Welding current, 60% duty cycle: 140 A . Nominal work cycle: 60% . Electrode wire diameter: 1.6 - 4 mm Condition: New

clamping range of chuck: 120 - 380 mm height: 95 mm daylight: 170 mm external diameter: Futter 400 mm external diameter: Spannhebel 600 mm weight: 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 1,2 t swivelling range: 0 - 120 Grad turning speeds: 0,06-0,6 U/min max. torque on the faceplate: 2400 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,75 + 1,1 kW weight of the machine ca.: 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,5 t dimensions: 1,4 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition: unused, in the original packaging Portable Welding Machine Adjustable amperage: 10-130 amps Electrodes: Suitable for electrodes from 1.6 to 3.2 mm Ø duty cycle: 25% duty cycle Equipped with: LED display Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Function: Electrode Welding (MMA) Equipped with: "Hot-start", "Arc Force" & "Anti-sticking" function Features: Small size, lightweight, portable and easy to use Including: manual

Mobile, Control area 45-300A

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mm table width: 2000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 2,5 t dimensions: 4,0 x 2,0 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special set 96 pieces, 28mm system, consisting of: 1x tool trolley 30x quick release bolts with twist lock short, without O-rings 8x universal stop 150 L - nitrided 4x universal stop 225 L - nitrided 8x stop and clamping angle 175 L - cast 2x stop and clamping angle 500 G left - nitrided 1x stop and clamping bracket 750 G left - nitrided 1x stop and clamping bracket 750 G right - nitrided 1x stop and clamping bracket 500 G left - nitrided 1x stop and clamping bracket 500 G right - nitrided 4x stop and clamping angle 300 G left - nitrided 8x prism Ø60-135 ° burnished - with collar complete with screw collar and countersunk head 16x professional screw clamps - nitrided 6x Professional screw clamp 45 ° / 90 ° - nitrided 4x universal stop 300 - nitrided 1x accessory set consisting of: Eccentric, Allen key, brush, sharpening ston ...

table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1000 - 1450 mm max. torque on the faceplate: 2000 Nm engine output: 0,75 / 0,55 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

Condition: unused, in the original packaging Portable Welding Machine Adjustable amperage: 10-130 amps Electrodes: Suitable for electrodes from 1.6 to 3.2 mm Ø duty cycle: 25% duty cycle Equipped with: LED display Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Function: Electrode Welding (MMA) Equipped with: "Hot-start", "Arc Force" & "Anti-sticking" function Features: Small size, lightweight, portable and easy to use Including: manual

number: 31 Positionen : 22 mm condition: neu weight: 43 kg Set 1 33-piece, 22mm system, consisting of: Clamps: 4 x 220610.1 Clamps 2 x 220630.1 Bolt: 12 x 220511 Stop: 4 x 220410.N Stop: 4 x 220420.N Angle: 2 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 780 mm table load: 1,0 t swivelling range: 0 - 135 Grad turning speeds: 0,15 - 1,5 U/min table height adjustment: von 780 bis 1560 mm max. torque on the faceplate: 1000 Nm welding current: 500 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated Input Voltage: 3P AC380V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 85% Insulation class: F Protection class: IP21 Weight: 43 kg Insulation value: F Protection value: IP21 MIG TIG MMA - Input power (KVA) 13.8 10.5 11.8 - Input current (A) 21 16 18 - No-load voltage (V) 80V 80V 80V - Output current (A) 40-350 10-350 30-300 - Output voltage (V) 31.5 24 32

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

number: 33 Positionen weight: 52 kg condition: neu : 28 mm Set 1: 33 pieces, 28mm system, consisting of: Clamps: 4 x 280610.N Clamps: 2 x 280630.N Prism: 2 x 280648.1.N Bolt: 12 x 160511 Stop: 4 x 280410.N Stop: 4 x 280420.N Angle: 2 x 160110.N Angle: 2 x 280152.N Accessory set. 1 x 283999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 560 mm table load: 0,3 t swivelling range: 0 - 90 Grad turning speeds: 0,25 - 4,0 U/min : 360 Nm welding current: 500 Ampere total power requirement: 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 5 t swivelling range: 0 - 135 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1100 bis 1950 mm max. torque on the faceplate: 7000 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unused, Hyundai MMA-160 welding machine 220V 20-160A, Powertherm XP45 plasma cutter 220V

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool;

number: 37 Positionen : 28 mm condition: neu weight: 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,19 t dimensions: 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with  ...

Including various accessories

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Suitable for MMA, Control range 10 - 180A, Shoulder strap

number: 106 Positionen weight: 283 kg condition: neu : 28 mm Set 5: 125 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolt: 36 x 160511 Magnetic bolt 8 x 280740 Stop: 12 x 280410.N Stop: 12 x 280420.N Stop: 4 x 280430.N Angle: 12 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Angle: 1 x 280144.N Angle: 1 x 280146.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1200 x 1200 mm table load: 7000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 14000 Nm total power requirement: 8,2 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection ...

Table dimensions: 1000 x 1000 mm table load: 2500 Kg swivelling range: 105 Grad turning speeds: 0,15 - 2,0 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 700 Ampere max. torque on the faceplate: 5000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)  ...