We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,748 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Welding turntable make ART Welding type AP 6Serial -No: 2016066 Year 2016Technical specifications:Load capacity: 600 kgWorking table diameter: 800 mmTilt Angle:-95° / +15°Tilting speed: 0.35 rpm.Speed: 0.09 - 0.9 rpm.Drive power: 1.5 kWWeight approx.: 700 kgDimensions approx.: 1100 x 570 x 1300 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
max center distance: 3000 mm One driven unit One non-driven unit Both units are movablenbsp; max swing: 1850 mm
used
Weber, Masch. No. 1109226, orbital riveting machine with RT-stand Motor M 631 / 4 0.18 kW 1360 RPM KMT - APK T-3-S-60-Z SN 307 89 01 Riveting time - adjustable 0.15-3 s Control - Siemens Simatic S 7-200 External dimensions 30 x 20 x 86 cm - riveting machine Panel 50 x 40 x 30 cm More info and details. Photos upon request I am retailer offers to similar machines interested in financing through leasing or hire-purchase request send data protection
used
table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Unused
used
Unused
used
Unused
used
Unused
used
Unused
used
Unused
used
Unused
used
Unused
used
Unused
used
equipped with: wheels; 5m cable welding torch; 4m ground cable PLEASE NOTE: C02 bottle not included
used
Compressed air supply: 6-8bar, connected load: 30kVA, length: 3280mm, width: 4820mm, height: 2385mm, weight: 2t, operational hours counter: 485h, with documentation.
used
Railings and grilles of 500 mm -1200 mm in height can be chiseled and 3800 mm in length. the grid can be rotated to any angle to shit.
used
Pallet with welding electrodes and welding wire approx. 1,000 kg total Net price 400,00 E
used
Description: Payload: 4kg Robot control: YA-1QAR42 Welding manipulator: YA-1RJB11 MYFRA PEDIA cooling system 2x manually rotating welding tables Safety cage Approx. Onsite Dimension. (l x w x h): 4,000 x 4,000 x 2,300 mm, weight approx.: 700 kg
used
Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.
used
200 WATT Laser Welding Machine Machine can be seen in working condition
used
weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Welding robotic set The robotic welding set consists of two separate workplaces. Each workplace has its own controls start and stop of the work cycle and own safety features. Technical parameters: ⢠FANUC ARC MATE 100iC 12S industrial robot with a reach of 1098 mm ⢠2x single-axis positioner with FANUC counter bearing capacity 1000 kg ⢠Robot on track ⢠Safety optical barriers REER ⢠Safety steel fencing ⢠Welding source MIG/MAG Migatronic Sigma Select 400 A ⢠ABICOR-BINZEL 500 A water-cooled welding bundle and torch ⢠ARC-TOLL software ⢠Search by wire - Touchsensing ⢠Automatic path correction - Tap Delivery contents: ⢠Complete robotic workplace, including assembly and commissioning at the customers site ⢠Two-day training for operation and programming
used
Welding table 3000 x 1500 mm
used
Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.
used
surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
Welding table 5 x 5 meter
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
Welding table 5 x 5 meter
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
variable speed, table can turn 360° table can tilt
used
Workpiece weight: 10000 kg Table diameter: 1400 mm Make Stahler 10 T Type SD 10000 Year 70 er Welding positionar manipulator Workpiece weight by welding positioner (kg) Table 1400 x 1400 Table diameter (mm) Load = 10.000 Kg Workpiece weight by selfaligning rotater (kg)Tilt 0 - 135 Gr Workpiece diameter (mm)Remote control Number of rolls New Elctr. cabinet
used
welding positioner is functional, little used
used
Table load 35 to . tischdurchmesser 3,000 mms
used
Table load 30 to . table diameter 3,000 mms
Workpiece weight: 1000 kg Table diameter: 100 mm Welding manipulatorHeinrichsgluck - TSV-35 MACH-ID 7693 Make: Heinrichsgluck Type: TSV-35 Year: 1972
used
SAF set for sale for automatic submerged arc welding of plate girders or pipes 1. Pole mount with two heads, SAF 2. Power sources 2x1000A 3. Hydraulic station for welding plate girders, 15 m long 4. Rotator for welding pipes 4t
used
Year 2019 Type HB25 Capacity 2500 kg Platform diameter 1400 mm Variable rotation speed 0.1 to 1 rpm Positioning speed 0.35 r/mn Tilt 0 to 120 Portable control Very good condition
used
one fixed unit and one movable unit (X-travel: 3000 mm) both units have manuals clamps variable turning speed center height: 1000 mm max swing of workpiece: 2000 mm cap with both units: 6000 kg cap with one unit: 3000 kg