welding positioner used for sale

Double Column Rotary Positioner with Lifting Device Lg.Nr. 25138 Specifications: - Max. load capacity per stand 4000 kg - Total load capacity max. 7000 kg - Travel / stroke 1780 mm - Lifting speed 1600 / 2800 mm/min - Rotary movement electr. adjustable - Right + Left – Run - Drive 400 V - Space requirements requested. Unit approx. W 1500 x H 4000 x D 1500 mm - Space requirement for moving unit W 1300 x H 4000 x D 1300 mm - Weight driven unit approx. 4000 kg - Weight running unit approx. 2500 kg

Lg.Nr. 25075 Mot. Welding rotary and tilting table Specifications: - Load capacity 1000 kg - Face plate diameter 800 mm - Face plate can be tilted by motor - Rotary movement electr. infinitely variable 0 - 250 cm/min - Welding current transmission 650 A - Drive 400 V / 2.8 kW - Table height in horizontal position approx. 1100 mm - Re- + counterclockwise rotation - Space requirement approx. W 1200 x H 1100 x D 1500 mm - Weight approx. 850 kg

Without gas bottle.

Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0.80 - 1.2 mm Weld plate thickness: 0.5 - 12 mm Accessories: Gas-protected welding gun (5 mm) European plug (50 mm²) Earth terminal (2 m) 36 V gas control Features: IGBT MAG / MIG, MMA & Lift TIG Dual pulse function VRD 2T/4T function 4-drive feeder 5-language support 18 sets Packed in 2 boxes: 730x420x900 and 550x330x400

Welding machine, fully functional

Fully functional welding machine

A Branson ultrasonic welding device is available. Frequency: 20kHz, power: 900W, stroke: 100mm, clamping force at 690kPa: 1.96kN, dynamic release: 67N-734N. Documentation available. On-site inspection is possible.

Unused new in packaging

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0.80 - 1.2 mm Weld plate thickness: 0.5 - 12 mm Accessories: Gas-protected welding gun (5 mm) European plug (50 mm²) Earth terminal (2 m) 36 V gas control Features: IGBT MAG / MIG, MMA & Lift TIG Dual pulse function VRD 2T/4T function 4-drive feeder 5-language support 18 sets Packed in 2 boxes: 730x420x900 and 550x330x400

Inv. Num. : 8389 Type: 2x ABB IRB 2400L Producer: Robolution Created: 2006 Parameters: Control system: IRC5 Door height: 2800 mm Door opening: 2800 x 2200 mm Machine weight: 5500 kg Height: 2200/3100 mm Width: 3750 mm Length: 5700 mm Equipment: Touch Screen The robot cell consists of: 2x ABB IRB 2400L Robot 2 x lathe (robot welding on one side of the table and the operator loads the material on the other side of the table) Welding power sources: 2x Fronius TPS 4000 Equipment for welding wires with diameters of 1 and 1.2 mm Burner

Suitable for Mig/Mag MMA, Control range: 10 - 500A, MIG welding torch MTW 400i

Welding Rotator SARAZIN type HD 100 - No 2 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machin ...

Various parts including welding wire, guns, gas nozzles, welding glass plates. Various collets and attachments; without pallet box;

Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool; 8165

Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible.

Weld edge former INDUMASCH SIEGEN Type V 12Masch. No.: 50674 Year of construction 1992Material thickness max. 40 mmChamfer angle 45Working speed approx. 3 m/min. Motor power 2 kWNetz connection 400 Volt, 50 Hz- Flow / return- Built-in guide roller for chamfer angle 45- Belt guard missingDimensions L x W x H 650 x 600 x 650 mmWeight 75 kggood condition; used

An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.

without pallet box

Welding turntable ESS type DT 50Fabr. No. 86 / 1125 Year of construction 1986Load max. 50 kgFace plate diameter 300 mmFace plate speed 0.19 to 5.7 rpm. Control voltage 24 voltMotor power 100 wattsMains connection 220 volts, 50 Hz.- Face plate in the position infinitely variable swivel by 180- Speed control via rotary potentiometers- Clockwise, counterclockwise rotation- Foot switch- 2-stroke and 4-stroke operation- Sliding contact for the mass up to 200 Amp.- New control ESS PS3 from year of construction 2009Space requirement L x W x H 600 x 500 x 350

v.v. TIG welding torch; MIG welding torch

Welding Fume Extraction, Soldering Extraction, TBH Type LN 230High Vacuum Filter Device, Laser Extraction, Laboratory Extraction, Extraction System, Filter SystemFabr. No. 230717 year of construction 2018Volume flow 320 m3/hEffective volume flow 50 to 250 m³/hstat. Pressure 20000 PaMotor power 1.1 kWNet connection 230 volts, 50 Hz- stepless suction power regulation via the control electronics on the device- upper part of the housing with several extraction connections 100, 80 and 2x 50 mm- mechanical air filter with approx. 99% separation efficiency- 1 piece filter 300 x 300 x 225

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible.

250A Tig DC, Welding torch not included

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Complete with some accessories.

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

current capacity: . kVA number of controlled axis: . workpiece weight: . kg : 50 zehn verschiedene Vers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unused

Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool; 8165

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Welding machine in working condition Welding torch not included

sheet width: . mm plate thickness: . mm serial number: 20719 total power requirement: . kW weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

li> TIG & MMA welding machine Functions: Hot TIG, Lift TIG, CLEAN & MMA Adjustable amperage: 40-190 amps Duty Cycle: 40% Duty Cycle equipped with: LED color display Includes: TIG torch Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Including: manual Condition: unused, in the original packaging

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

Suitable for TIG/MMA, Control range TIG: 3 - 400A,