welding mig used for sale

number: 77 Positionen weight: 146 kg condition: neu : 28 mm Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic bolts 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,8 U/min max. torque on the faceplate: 450 Nm table pass: 80 mm welding current: 500 Ampere total power requirement: 0,18 + 0,18 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

including various pipe clamps; Cutting torch accessories

table diameter: 700 mm table load: 0,5 t swivelling range: 0 - 135 Grad turning speeds: 0,2 - 3 U/min height adjustment: 400 - 900 mm boring diameter: 100 mm welding current: max. 500 Ampere total power requirement: 0,75 kW including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,261 t dimensions: 1,2 x 1,2 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mm table load: 0,6 t swivelling range: 0-90 Grad excentricity: 200 mm table turning speeds: 0,2 - 2 U/min Torque: max. 900 N/m total power requirement: 0,37 kW dimensions of the machine ca.: 1,1 x 0,92 x 0,8 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...

Professional Inverter Welding Machine MMA 330A Brand: KRAFT&DELE Features: . Multifunctionality – MMA welding, Tig Lift, Pulse . Rated Voltage: 230V 50Hz . Idle voltage: 60V . Welding Range: 20-330A . Supports electrodes from 1.6 to 3.2 mm in diameter . Class F and IP21S insulation protection Condition: New

A Schwalbach high-frequency welding system for dielectric heating for the glass industry is available. Connected load: 17kVA, generator output: 7kW, frequency: 2712MHz, transmitter tube: 2xTB6/4000, high voltage: 7000V DC, overload cut-off from: 2100mA. Documentation available. On-site inspection is possible.

table diameter: 560 mm table load: 0,3 t swivelling range: 0-90 Grad table turning speeds: 0,25 - 4 U/min Torque: max. 360 N/m centre of gravity: max. 150 mm total power requirement: 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-H ...

ESAB AristoTig 400 TIG Welding Machine; serial number 105-235-2424; TIG version; maximum ampere load 400 A.

Condition: unused, in the original packaging Portable welding machine Adjustable current: 10-130 Ampere Electrodes: suitable for electrodes from 1.6 to 3.2 mm Ø Duty cycle: 25% Equipped with: LED display Includes: MMA torch Connection: 220 Volt Technology: IGBT technology Function: electrode welding (MMA) Equipped with: "hot-start", "arc force" & "anti-sticking" function Features: Small size, lightweight, portable and easy to use Includes: manual

Serial Number: 00826 Voltage: 400 V Max. Power: 230 kVA

An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.

number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item  ...

Serial number: 1061 Electrode force: from 15 to 110 kP

Unused in box

Suitable for MMA, Control range 10 - 180A, Shoulder strap

Offer 24587 Specifications: - Electrostatic filter with indicator light - Extracted and purified air is returned to the working area - Wall-mounted design with two articulated extraction arm - Articulated suction arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter area 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Mobile; fuel engine powered; mounted in steel frame; equipped with lifting eyes;

Please note! Needs to be checked

Offer 05394 Specifications: - BIA tested sweat extraction device - Joint extraction arm 3000 mm - Air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - Filter area approx. m² - Filter control - light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit

Unused new in packaging

A railing welding device (railing welding jig) Förster is available. Component weight: 300kg, turning radius: 360°, axle height: 1000mm, max. incline: 60°, railing height: 600mm-1200mm, max. profile dimensions X/Y: 80mm/40mm, max. profile diameter: 80mm, machine dimensions X/Y: 5000mm/1200mm. Documentation available. On-site inspection is possible.

HF welding machine with sliding table - 1.1 KW

HF Welding Machine with Sliding Table

Cables included.

Welding Type: Designed primarily for Manual Metal Arc (MMA) stick welding, it can also be used for carbon arc gouging with appropriate adapters. Performance: It typically offers a welding current range of 5 to 300 Amps. Design: It features a mobile chassis with wheels and handles for transport. The unit is roughly 93 cm long, 68 cm wide, and 65 cm high, weighing approximately 100 kg. Power Supply: Most models require a 380V or 400V 3-phase electrical

Rated power: 63 kVA Projection: 520 mm Electrode arm spacing: 200 mm Welding capacity steel: approx. 7 + 7 mm Welding performance of non-ferrous metals: approx. 2 + 2 mm electr. Connection: 380 V kW

Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Unused, Hyundai MMA-160 welding machine 220V 20-160A, Powertherm XP45 plasma cutter 220V

Welder Manufacturer: Merkle Type: HighPulse 552 RS Year of Make: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off fuse

PROGRESS MESH WELDING M-System Evolution Model 2012 M25576 • MMR – Straightening Machine Model 2012 • SWR – 6 Welding Heads Model 2012 Max mesh size: 3.5 m width and 9.0 m length Cross & length wires diameter: 6, 8, 10, 12, 16mm Mesh characteristics: Width: up to 3,500mm, Length: up to 9,000mm Min. Width: 500mm, Min. Length: 1,000mm Max. Bar Length: 9,000mm, Min. Bar Length: 500mm Bar Length Tolerance: +-5mm, Bar Placing Accuracy: +- 10mm Crosswire Diameter: 6, 8, 10, 12 and 16mm Line Wire Diameter: 6, 8, 10, 12 and 16mm Bar on Bar Welding: 12mm on 12mm Placement Angle of Bars: 0° or 90° Minimum Flying End Length: 25mm A Bar must have at least two welding nodes Only one Bar per receiver is permissible Standard centres: Cross Wires: Infinetely variable (minimum 35mm) Line Wires: Multiple of 25mm Minimum Centres: Cross Wires: 25mm Line Wires: 25mm  ...

Manufacturer: Eckert Model: Jantar Year of Manufacture:2010 Table size: 3x6 meters 2 Hypertherm XPR 120A high-definition plasma cutting heads Pipe cutting attachment Exhaustor system One plasma source has had parts removed and requires replacement components. The machine is fully operational with one cutting head. Find more here - / Contact us at -