We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Weber, Masch. No. 1109226, orbital riveting machine with RT-stand Motor M 631 / 4 0.18 kW 1360 RPM KMT - APK T-3-S-60-Z SN 307 89 01 Riveting time - adjustable 0.15-3 s Control - Siemens Simatic S 7-200 External dimensions 30 x 20 x 86 cm - riveting machine Panel 50 x 40 x 30 cm More info and details. Photos upon request I am retailer offers to similar machines interested in financing through leasing or hire-purchase request send data protection
used
table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Unused
used
Unused
used
Unused
used
Unused
used
Unused
used
Unused
used
Unused
used
equipped with: wheels; 5m cable welding torch; 4m ground cable PLEASE NOTE: C02 bottle not included
used
Unused
used
Unused
used
Welding turntable make ART Welding type AP 6Serial -No: 2016066 Year 2016Technical specifications:Load capacity: 600 kgWorking table diameter: 800 mmTilt Angle:-95° / +15°Tilting speed: 0.35 rpm.Speed: 0.09 - 0.9 rpm.Drive power: 1.5 kWWeight approx.: 700 kgDimensions approx.: 1100 x 570 x 1300 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Compressed air supply: 6-8bar, connected load: 30kVA, length: 3280mm, width: 4820mm, height: 2385mm, weight: 2t, operational hours counter: 485h, with documentation.
used
Railings and grilles of 500 mm -1200 mm in height can be chiseled and 3800 mm in length. the grid can be rotated to any angle to shit.
used
Pallet with welding electrodes and welding wire approx. 1,000 kg total Net price 400,00 E
used
max center distance: 3000 mm One driven unit One non-driven unit Both units are movablenbsp; max swing: 1850 mm
used
Description: Payload: 4kg Robot control: YA-1QAR42 Welding manipulator: YA-1RJB11 MYFRA PEDIA cooling system 2x manually rotating welding tables Safety cage Approx. Onsite Dimension. (l x w x h): 4,000 x 4,000 x 2,300 mm, weight approx.: 700 kg
used
Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.
used
200 WATT Laser Welding Machine Machine can be seen in working condition
used
weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Welding robotic set The robotic welding set consists of two separate workplaces. Each workplace has its own controls start and stop of the work cycle and own safety features. Technical parameters: ⢠FANUC ARC MATE 100iC 12S industrial robot with a reach of 1098 mm ⢠2x single-axis positioner with FANUC counter bearing capacity 1000 kg ⢠Robot on track ⢠Safety optical barriers REER ⢠Safety steel fencing ⢠Welding source MIG/MAG Migatronic Sigma Select 400 A ⢠ABICOR-BINZEL 500 A water-cooled welding bundle and torch ⢠ARC-TOLL software ⢠Search by wire - Touchsensing ⢠Automatic path correction - Tap Delivery contents: ⢠Complete robotic workplace, including assembly and commissioning at the customers site ⢠Two-day training for operation and programming
used
Welding table 3000 x 1500 mm
used
Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.
used
surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
Welding table 5 x 5 meter
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
Welding table 5 x 5 meter
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
new
Automatic labeler for reinforcing mesh Production description This labelling device is suitable for attachment to a fully automatic mesh welding machine. It is used for the automatic application of labels from PVC tape to the welded meshes. Labelling takes place during the welding process and thus when the mesh is at a standstill. Consisting of: - a labelling unit complete with pneumatic unit and control panel -a control unit - a spare knife - 3 reserve sealing heads
used
EVG Complete mesh welding line - Max. Width mesh - 2.400 mm - Max. Length mesh - 6.000 - Wire diameter range – 4 mm - 12 mm - Max. speed - 70 strokes / min. -Longitudinal wire spacings 100 mm, 150 mm, 200 mm -Cross wire spacings 100 mm, 150 mm, 200 mm -Longitudinal and cross wiress are from piece. -The line is complete and still in working condition served by one man. -Machine can be seen in factory.
used
One used state of the art high performance mesh welding line ECG: a. Complete system with up to 70 pcs spools (each 3 t ) b. Machine is fully equipped with up to 24 longitudinal wires c. Production speed up to 280 cross wires per minute or also a production capacity of 90 t per 7.5h d. Siemens S7 technology e. This line even has an automatic mat bundle tying system, i.e. fully automatic tying of the finished mats into a bundle and an automatic mesh paket stacker. f. Roller conveyors up to 20m in length to transport the finished packs to the storage area. g. Spare parts package possibly included
used
One used SCHLATTER MG330 high performance mesh welding line for standard mesh in sheets Actual production output: 100t/shift Very complete with line wire pay offs, automatic tying system and many extras
used
full line for mesh up to 6 m
used
Ideal PGS typ.140-12 Mesh Welder Mounted In Enclosed Wire Cage Safety Structure, Grid housing Adjustable welding cylinder 12 pieces Welding force 10 KN, with control Welding panel, welding programs Machine fencing area dimensions 7.600 x 5.800 x 2000 mm Weight cca 5 ton typ.140-12 Mesh Welder Max. Usable width 1 = 1400mm Cross wire diameter: 2.00-8.00 mm Rated power at 50% ED 63kVa Connection power kVa165 Mounted In Enclosed Wire Cage Year of manufacture 1995 Including complete safety fencing area
used
One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack
used
ID3097 MBK Type 414, 33-190/12D-300 year/Year of construction 2013 Reinforcement welding machine, good condition Rebar welding machine, good condition
used
Capacity: max. width: 5000mm/min. 1000mm; Length min. 1000 / max. 11500mm; longitudinal threads and cross wires: ø 6, 8, 10, 12, 14, 16mm; minimum between two longitudinal wires: 25mm / max 1500mm; Minimum number of longitudinal wires 2 / max. 84; Cross wire maximum length: 5000mm/min. 1000mm; minimum distance between 2 cross wires 25 / max 2000mm; Maximum bending height: 350mm/min. 56mm; bending angle up to 180°; Maximum weight single net panel: 1100 Kg; maximum weight of the pack of flat nets: 3000 Kg; Maximum height pack flat nets: 350mm; consisting of: 6 electrically driven feed reels, motor power: 9.20 Kw, 1 straightening machine with chain-driven conveyor with cleats; 1 hydraulic pump unit, motor power 1x 30 / 1x 15 Kw, 1 SIEMENS SIMATIC Touch Operator control panel; , 1 pick-and-place cross-wire swivel arm, 1 6-head welding machine, 1 GREEN BOX refrigeration system, model MR19-H ...