137,667 used machines on RESALE, but how to find them? Machine Search
Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Used vertical wrapping machine by Ulma model VTC 700. New 2008. Vertical Fulfillment Wrapping Machine (VFFS) that forms a package with three seals. Designed for continuous packaging at high production speeds of up to 140 cycles/min. The VTC 700 machine is specially designed for continuous wrapping of many different types of products. The machine is extremely flexible in terms of changing the moulding size to allow for different portions and has the versatility to adapt to any type of film. Combine these features with the level of electronics specification and you have one of the most technologically advanced machines available on the market. Standard features: - Stainless steel version. - Servo-driven cross seal jaws (2 servo motors). - Servo driven film transport (2 servo motors). - Open front frame design. - Film spool holders with pneumatic wedges. - One-piece and eas ...
An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Mobile laboratory refrigerator (+1 / +8 °C). Incl. grating and lattice rail. Refrigerator is as good as new. Mobile Laboratory Refrigerators (+1 / +8 °C). Incl. grating and grating rail. Refrigerator is as good as new.
Perfect binder line WOHLENBERG GOLF 370 consist of: Gathering machine WOHLENBERG SPRINTER 7000 1994.year 16 automatic station with double and mis control (4 unit x 4 station) hand feed station criss-cross delivery pumps, documentation conected to Binder WOHLENBERG GOLF 6000 1994. year Max size of book 370 x 320 x 50 mm opticontrol for book size on enter proces vibrator for book block milling and rughering station extraction sistem with 2 bags hot melt side unit with 2 disc hot melt spine unit with 2 rolers PUR melt spine unit with 2 rolers and PUR Nordson melter 20 kg PUR station for cleanig cover feeder with duble and mis sensor control 15 clamps 1 x press station for conection of cover and bookblock 2 x press station for forming spine and side of book delivery table pumps, spare parts, dokumentation ...
Type: ST-700 Sealing length: 4 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 3.3 kW Machine dimension in cm: Width: 145 Lenght: 65 Height: 98 Delivery time: after advanced payment, 1 working day
The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...
The machine is completely factory refurbished with a 1 year warranty. Delivery, installation, samples and training included in the price. Vacuum Pump Buch. Pulsating vacuum. Setting programs with work/pause and stepless smooth adjustment of the revolutions of the receiving hopper.
BOMAG BW 200 Roller / Pneumatic Compactor, 7 to, 4 Zyl Deutz Motor, Vibration full working, German Machine, Year 1977
TO WHOM IT MAY CONCERN ; WE VE 2 PCS REBUILT COMPLETE BOSCH FUEL INJECTION PUMPS OF MERCEDES OM 424 LA AT OUR STOCK PUMPS ARE READY TOU USE . WE VE ALSO ADDATIONALY BELOW NEW SPARES FOR SAME ENGINE TYPE FULL 2 SETS FUEL PIPES 8 PCS COMPLETE INJECTORS 19 PCS BARREL AND PLUNGERS 1 FUEL PUMP GEAR AND FLANGE 48 PCS RECON COMPLETE INJECTORS HOLDERS 4 PCS PRE FUEL FEED PUMPS 1 PC OIL PUMP 2 PCS NEW WATER PUMPS 5 PCS REBUILT EXH GAZ TURBO CHARGERS K36-424 ETC ETC ETC ... IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .
From original template directly onto plate. fully automatic! The original is exposed via lens system onto a printing-plate roll. Plate is automatically cut and developed - ready for direct use on Rotaprint.
SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006
CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn
Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h ...
Weibert SMA-700T Rocker saw PTO drive Tractors power min. 15hp PTO speed: max. 540 rpm Drive saw blade: belt drive Saw blade speed: max. 1440 rpm Saw blade diameter: 700mm Carbide-tipped Holder 30mm, tooth pitch 32mm, thickness 3.2mm Total weight 136kg Dimensions: 109mm x 85mm x 110mm (LxWxH) G&JAN-1055004
7000 m² mezzanine, as good as new Used goods, good condition, see pictures Column grid 580 x 520 cm Ground floor: Height lower edge: 490 cm Height top edge: 540 cm Load capacity: 750 kg/m² 1st floor: Height lower edge: 340 cm Height top edge: 380 cm Load capacity: 500 kg/m² 3. Floor ceiling possible Price on request Partial sale and CAD planning possible. Transport and assembly possible. All plans and statics available. Subject to change. As long as stocks last. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Set of 3 high precision angular contact ball bearings, Spindle bearing, 7020 CD/P4ATBTG130, SKF, new Attention: Original SKF product - No replica from… Special price ! If you have a UID number, we will gladly issue an invoice without VAT. New! The part was bought from a spare parts store of a company and has never been in operation, is completely new. Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we do provide a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.
Description of the chip press: Powerful metal chip press with chip shredder for long turnings. The area of application is the processing of large quantities of milled and turning chips. Materials: aluminum, steel, cast iron Drip pan as oil tank Geared motor for optimal agitator operation Hydraulic Compression Cylinder Hydraulic press cylinder with two coaxial sections Diameter of briquettes 60 mm Automatic briquette length adjustment with displacement transducers Inductive Proximity Sensors Pre-compaction cylinder in conjunction with special compression hydraulic cylinder that compacts the material in the bushing-bulkhead unit Briquette ejection system, consisting of a compression chamber and a bulkhead with special anti-wear treatment Highly efficient closed-circuit oil cooling system consisting of an air/oil heat exchanger Hydraulic system with B ...
x-travel: 6300 mm y-travel: 1200 mm z-travel: 2000 mm Control: total power requirement: kW weight of the machine ca.: 57 t dimensions of the machine ca.: 7000x1300x5000 mm Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAX TRUNK DIAMETER 700 MM SUBSTRUCTURE LENGTH 6000 MM CUTTING LENGTH OF 4.8 METERS 5.5 KW MOTOR HYDRAULIC BELT TENSIONING
Commercial dishwashers Hobart FXS-70NB defective -defective commercial dishwashers from Hobart -Model FXS-70NB -Years of construction from 2008 to 2012 -more than 30 pieces available in stock
85,700 litre wine tank/storage tank RSM, round, made of V2A Cat No.: 24-0149 Condition: New Pieces: 5 KK UNI-ACKER Dimensions: Overall height: 12,850 mm Diameter: 3,000 mm Sheath height: 12,000 mm Thickness: Bottom 3 mm Sheath 3-2 mm Lid 3 mm composed of: Flat floor for concrete base 3% inclined incl. ground anchoring ring in accordance with European regulations in the event of earthquakes and storms (parts of the anchor ring must be welded on site by the customer). Nozzle DN100 DIN 11.851 in the lid (for mounting light on the customer's side, light not included) Dome Ø 400 mm in 1.4404 with jointvery stable Solid door Laveggi A4 (edge thickness frame 12 mm) without swivel arm Double-jacketed laser-welded 2xh 1250x9330 à 8.75m2 with parallel connection 2" Connector Thermometer connection NW20 with sleeve Cleaning line NW 50 with connection ...
Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T
Max. sheet size: 720 x 320 mm Min. sheet size: 140 x 210 mm 9 creases per sheet Variable speed from 1200 – 1800 sph Suitable for paper stocks between 120 to 300 gsm
Builder: HAAS Model: 700/1500 HDWV-D Motor: CAT C9 300 HP Work Data: W. 6.850 mm x L. 2.530 mm x H. 2.700 mm Operative Data: W. 8.700 mm x L. 2.530 mm x H. 3.200 mm Year: 2011 Hourly Production: 30 t/h Rotor: 2 Pz (TWIN SHAFT) Rotor Data: L. 1.500 mm x D. 700 mm Rotor Tools: 7/6 TOOTH per ROTOR + 4 TOOLS Weight: 19.000 Kg
Manufacturer: Bürkle, Type: SLC 700, Year: 2009, Control: Bürkle, Work piece width min-max mm: 700, Operating side: rechts, Year :2009
Vötsch VT 7030 S2 Thermal Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a familiar environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a wide range of environmental conditions for scientific studies, product testing, and process controls. Data for temperature tests in single-chamber operation Hot Chamber: Thermal shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Thermal shock te ...
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB100x50 Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 1,600 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB140x50 Agraffe: 5 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,300 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Man Roland 705 Lacquer Year of Make: 2009 Property Value 90 mil Supply voltage (U) 3-phase, 400 V Frequency (f): 50 Hz Max. motor current (IFLA): 168 A Pre-fuse (according to IEC 60269): 200 A Fuse operating class: gL/gG Short-circuit power: 42 kA, balanced, 400 V max. Control Type: Industrial Control Panel, UL/cUL Certified Control cabinet type: Type 1, Use type 12 Connectors Degree of protection (IP): IP54 (dust-proof, splash-proof) Wiring diagram: 8035963F493 Location marking: Ax Mechanical engineering: High-quality German construction IP54: Dust-proof and splash-proof – industry standard. 200A pre-fuse: High power requirement, large printing machine. 42kA short-circuit power: Control cabinet is designed for high short-circuit currents, very robust. Specifications of the Manroland ROLAND 700 DirectDrive Format & Capacity Maximum sheet size: 740 ...
2.70 Meter AR Racking Pallet Rack Base Field AR Racking Pallet Rack Basic Field with a total length of 2700 mm. The field has three levels (incl. ground parking space) with four trusses (2700 mm). In the field, 3 Euro pallets can be stored next to each other and 3 pallets (incl. floor storage space) on top of each other The base panel has a push-through protection against unintentional pushing of pallets in the rack. The field offers space for 9 Euro pallets Manufacturer: AR Racking Type: ARPA-S Total length: approx. 2700 mm Shelf height: 3000 mm Shelf depth: 1100 mm Clear field width: 2700 mm Pitch: 50 mm Number of storage levels: 3 (incl. floor storage space) Number of fields: 1 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 9 Year of manufacture: 2023 Stand The frames consist of two Omega profiles with their corresponding connectors, po ...
Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Min size: 28x28 cm max Size: 76x102 cm Max speed 50 m/min Grammar 130 gsm- 380 gsm Pneumatic
Knife for slicing machine WEBER CCS 304,305,402,404,405,602,604 diameter 460 mm 4 holes with a diameter of 20 mm center hole 48 mm weight 5,24 kg Catalog number : 70505008 10094 Clamping disc waga 0,46 kg Catalog number : 70504837 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl
Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine ...
The Pannkoke 7011 CeDe is a vacuum lifting system for glass and similar materials. It is designed for the safe and flexible internal transport of heavy sheets. Below you will find the key specifications. ⚙️Main technical data Type: Vacuum lifter Year of construction : 2001 Serial number : 2001/ 2184 01 Vacuum circuit: o 1-circuit system with vacuum tank, check valve, vacuum switch and vacuum gauge o Closed circuit prevents vacuum loss in the event of a power failure o Acoustic signal when there is insufficient vacuum o Vacuum generation: o Built-in low-maintenance vacuum pump (dry running) Battery-powered, with quick-change system (battery change < 1 minute) o Charger for second battery (110–230 V, 50/60 Hz, 1 phase) o Operation: o On/off directly on the device o Suction/release via remote control o Suspension: 2-fold crane suspension, rotatab ...
Trumpf TruMicro 6 kW laser source High-power disk laser with nanosecond pulses. The high-power nanosecond lasers of the TruMicro Series 7000 are based on disk laser technology and combine short pulses and high pulse energies even at high frequencies. This allows you to remove layers and dirt at top speed and reduce your cycle times. Further optimize your processes by varying the repetition rate – while maintaining the same pulse duration The short-pulse lasers of the TruMicro Series 7000 are the ideal tool for efficient and economical cleaning of tire molds. Large-area applications with high medium power Ablating, cleaning, tempering: The TruMicro Series 7000 lasers show their full performance in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous decoating rates. A scanner ensures excellent performance utilization. Flexible las ...
Transnorm conveyor belt GF 22980-700-600 RA2064 Technical data: Conveyor length (NL): 22980 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 22980 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / s: ...
Transnorm belt conveyor GF 5100-700-600 RA2105 Technical data: Conveyor length (NL): 5100 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): Frequency converter for stepless speed control Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5100 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: freel ...
Lippert belt conveyor GF 3150-900-700 RA2113 Technical data: Conveyor length (NL): 3150 mm frame width (NB): 900 mm belt width (GuB): 700 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3150 Nominal / outside width in mm: 900 Belt width in mm: 700 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / ...
Lippert Belt Conveyor Riser with Arch and Straight GF 7000-650-500 RA1368 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7.000 mm (riser 4080mm + bow 500mm + upper straight 2420mm) Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Defle ...
curved belt conveyor curved belt 45° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 45° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 45° Direction: Right Nominal radius/radius of indoor RN: 2480 mm BN width: 700 mm Drive location: outside pulling installed power: 0.37 kW Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 1800 x 1100 x 600 Weight (gross): 120 kg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 2480 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung ...
Automatic planing and moulding machine WEINIG Powermat 700 Year of construction 2020 Tool Assembly 018 (u-r-l-o-o-u) 1. Spindle bottom 7.5 Kw 6,000 rpm 2nd spindle right 15 Kw 8,000 rpm 3. Spindle left together with right spindle driven 8,000 rpm 4. Spindle top 11 Kw 8,000 rpm 5. Spindle top 7.5 Kw 8,000 rpm 6. Spindle bottom 7.5 Kw 8,000 rpm Feed rate 5 Kw Feed speed infinitely variable 5 - 40 m/min Total connection 56.5 Kw Equipment: - Comfort Set - Electronic digital displays - Folding device - MarathonCoating for table insert in front of the 1st spindle - Stop lip after the right spindle with quick adjustment - Pressure roller from above opposite the right spindle, swivels away and spring-loaded - Shorter roller spacing compared to the right spindle - Extension of the pendulum axle compared to the left spindle up to 150 mm - CNC control for dimension adjust ...
Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 ...
maximum number of results exceeded
please refine your search
