weinig moulder used for sale

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage

Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.

THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

Description Brand ESMACH Model FOR 3C ID 7256 Status Active Year of manufacture 2006 Location Oradea (RO) Moulder for rolled bread ESMACH FOR 3C manufactured in 2006, with 3 cylinders pre-arranged for manual loading with chute for pieces return. Double anti-waste device, adjustable through micro-metric steering, enabling two pieces to be processed simultaneously, stop device for the upper belt, output performance: 20 to 1200 g. ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

SCM-MINIMAX Universal Combi Model CU410 CLASSIC Specifications: - Useful working width of flush tables 410 mm - total length of the wire plates mm 1800 - Tilting wire guide degrees 90-45 - top dimensions thickness 410x605 mm - feed speed at thickness m/min 7 - min/max working height at thickness 3/230 mm - Dimensions of the spindle moulder table mm 1100x339 - Saw blade inclination 90-45 degrees - max. diam. Saw blade mm 315 - max. protrusion of the saw blade from the table at 90° mm 100 - max. protrusion of the saw blade from the table at 45° mm 80 - max. squaring capacity (basic machine) mm 1465 - cutting width at rip fence 820 mm - Useful spindle length 125 mm - Spindle rotation speed rpm 1400-3500-6000-8000 - max. spindle moulder diameter under the table 210 mm - max. tenoning tool diameter 275 mm - Motor power (n. 3 motors) HP 4 kw 3 Hz 50 Standard equipment - ...

CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...

CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...

CATALOG NO. 7145 TECHNICAL DATA - loading hopper inlet 800x600mm - outlet for chipped wood, diameter 125 mm - rotor working width 580mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 40x40mm - 20x15mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1820x1220x1650mm - weight 1232kg ADVANTAGES – German production – original DTR + CE documentation – V-type rotor – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 49900 PLN Net price: 11089 EUR depending on the price 4.50 EUR Net price: 13132 USD depending on the price of 3.80 USD (Prices may vary with higher flu ...

Make : CMT Model : FL 1400 Use : Cooking/ Stretching and Moulding Line for Hard Cheese and Soft Cheese Condition : Very Good Consists of : 1. CMT Cooker and Stretching 2. Screw Hopper for Infeed of Moulder 3. Moulding machine with two sets of moulds 4. Hot water tank 5. Hot water Boiler tank 6. Control panels 7. Change parts for CMT

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

CATALOG NO. 7105 TECHNICAL DATA - loading hopper inlet 800x1000mm - rotor working width 800mm - main engine 18.5kW - pump motor approximately 1.1kW - number of knives 19 pcs - knife dimensions 30x30mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 180 mm - dimensions length/width/height 2090x1360x1630mm - weight 1250kg ADVANTAGES – autoreverse – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 62900 PLN Net price: 13978 EUR depending on the price 4.50 EUR Net price: 16553 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Pla ...

CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...

CATALOG NO. 7194 TECHNICAL DATA - inlet width 490mm - inlet height 150mm - shaft width 510mm - shaft diameter 400mm - knife length 520mm - number of knives 2 pcs - no sieve - toothed shaft pulling from the bottom - lower shaft motor 2.2kW - toothed shaft pulling from above - upper shaft motor 2.2kW - main engine 45kW - dimensions length/width/height 2200x1100x1300mm - weight approximately 1500 kg Machine used for inspection. No electrical box. The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Plane ...

CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 76900 PLN Net price: 17089 EUR depending on the price 4.50 EUR Net price: 20237 USD depending on the price of 3.80 USD (Prices may vary with higher fl ...

CATALOG NO. 7102 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 18x18mm - toothed shaft pulling from the bottom - lower shaft motor 0.75kW - toothed shaft pulling from above - upper shaft motor 0.75kW - belt feeder - feed belt length 3260mm - feed belt width 400mm - main engine 38kW - autoreverse - diameter of the exhaust pipe 250mm - total dimensions length/width/height 5200x1400x1870mm, - weight 2020kg – German production – autoreverse – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 88900 PLN Net price: 19756 EUR depending on the price 4.50 EUR Net price: 233 ...

CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed shafts pulling from the top and bottom, 2×2.2kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - feed belt width 400mm - main engine 30kW - chipper dimensions length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight approximately 3000 kg – with belt feeder – electric autoreverse - reverse gear – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 84900 PLN Net price: 18867 EUR depending on the price 4.50 EUR Net price: 22342 USD depending on the price o ...

CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from the bottom - lower shaft motor 1.5kW - toothed shaft pulling from above - upper shaft motor 1.5kW - belt feeder - length of the feed belt 5400mm - feed belt width 400mm - main engine 30kW - autoreverse, - reverse gear - machine dimensions length/width/height 2200x1450x1150mm - feeder dimensions length/width/height 5300x550x500mm - weight 1950kg – German production, – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 78,900 PLN Net price: 17533 EUR depending on the price 4 ...

CATALOG NO. 7239 TECHNICAL DATA - shaft width 350mm - shaft diameter 260mm - inlet width 350mm - inlet height 120mm - number of knives 11 pcs - autoreverse - sieve dimensions 18x12mm - toothed shaft pulling from the bottom 0.75kW - toothed shaft pulling from above 0.75kW - with vibrorine - vibrochute length 3280mm - vibrochute width 335mm - vibrochute motor 0.75kW - main engine 22kW - feeder dimensions length/width/height 3280x600x510mm - machine dimensions length/width/height 1600x950x850mm - weight 1150 kg – German production - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 36900 PLN Net price: 8200 EUR depending on the price 4.50 EUR Net price: 9711 USD depending on the price ...

max. tool diameter: 400 mm : 180 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

W&P Haton Cone Circular Moulders Cones and knitting channels with Teflon without lubrication on request completely overhauled with newly teflosinated cone mobile on wheels with brake 380 volts

Belt moulder for rye bread used good working condition

Machine overhauled & repainted by an expert 6 months warranty Properties: + mobile combination sheeting machine + for all types of dough for rolling out and touring + with circular moulder / circular actuating beam for Seewer Rondo SKO + with new felt and linen tapes and scrapers + relevant parts have been refelted + with trawl net & corrugated mat for wrapping dough rolls or breads + with long-acting station at the bottom for all doughs for long rolling + with high conveyor belt for breads + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine has been finally tested by our master baker & confectioner Technical data SKO 63: Belt width: 615 mm Roller width: 630 mm Roller opening: 0.1 to 30 mm Synchromesh Technical data Rondex: - Rondex length: 154 cm - Insertion height Rondex: 175 c ...

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max. depth ...

5 LITRE PET LINE - 2,000 BPH Sidel ‘SB02F’ Rotary Blow Moulder, M08 neck finish, Sidel Preform Hopper and Feeder Elevator with Sidel Preform Unscrambler Air Conveyor System with swan neck elevator and lowerator AVE 15 Valve Filler and 4 Head Capper with cap hopper and elevator (2004) Comag ‘PLH2500’ Neck Handle Applicator (2008) Harlands 155WS RC Inline Labeller (2010) Smipack ‘BP700AR’ Shrink Wrapper (2006) Smipack ‘T650’ Conveyorised Heat Tunnel (2007) Logopack ‘410IIIF’ Pack Labeller (2015) Lita ‘Eco’ Palletising System comprising of infeed metal roller conveyor, Lita pack stacker with carboard tray insertion, pallet infeed and outfeed system TOSA ‘85’ Rotary Pallet Wrapper, Type AV5866 and outfeed station Location: UK This 5 Litre PET line is in good working order, and inspection in the factory is most welcome.  ...

FOUR SIDE PLANER machine type MAGIC RECTA 22 second hand machine n.04 spindles with tools (Yes) n.04 separate motors : 1° shaft : surface planer . motor power Hp 4 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 4 4° shaft : thickness planer . motor power Hp 5,5 entry table length mm. 2000 max. useful working width mm. 220 max. useful working height mm. 120 diameter of shaft mm. 40 volt. 380/50 net weight kgs. 1200

Overview The disposable PET-ACF line was manufactured by KHS in 2006. Most parts of the line are from KHS. Blow moulder is from Sidel and process department from GEA. The line is for sale, as the complete factory is closed Technical specifications: PET bottle formats 330 ml 500ml Suitable for juices and soft drinks with or without CO² Capacity Non-carbonated drinks: 30.000 bph (330ml 500ml) Carbonated drinks: 24.000 bph (500ml) Control: Siemens S7 Year of manufacture: 2006 The line in detail: Manufacturer: Sidel Machine type: Blow moulder Model: SBO 16 Year of manufacture: 2006    Manufacturer: KHS Machine type: Cap steriliser Model: SCS 8 Flatcap 28mm Year of manufacture: 2006    Manufacturer: KHS Machine type: Cap steriliser Model: SCT 4 Flat 38 mm Year of manufacture: 2006    Manufacturer: KHS Machine type: Filler Model: asmofill ACF 30-70-100-15 incl. supply units for peroxide ...

moulder for bread rolls

Complete filling line setted for 0,5 ltrs size bottles - blow moulder KRONES (2008) with 10 cavities - filler SARCMI isobarometric (SIDEL) 70 valves - labeller KRONES - 2 packagers for the 0,5 bottle size - Palletizer ACMI

Krones Contiform S 10 PET blow moulder with pre-mould feeder, box tipper and dry cooler Capacity up to 18,000 bph The facility can be visited in operation until 14.12.2023. Price on request.

Wet Aseptic Filling Line Krones PET 18000 bph Excellent condition Krones Dry Aseptic PET line for non-carbonated demanding products like smoothies, juices and dairy products without CO2. The line was commissioned in year 2018 by Krones and having only less than 12000 total operating hours. This line was purchased by current owner for contract filling so called Innocent Smoothies in 250ml, 360ml and 750 ml PET bottles with D38ml neck format. It has large GEA made aseptic processing plant for product treatment before filling. Blow moulder is Krones Contiform 310 PRO with 10 cavities, Contipure D preform disinfection system and for energy savings there is an infrared linear oven with ceramic reflectors and Air Wizard Plus pressurizer air recycling system. Filling and capping is made with Krones PET-Asept Bloc D, which has a wet aseptic system. Bloc contains aseptic bottle sterilizer STE ...

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts  ...

CATALOG NO. 6873 TECHNICAL DATA - max width of the processed element 240mm - max height of the processed element 190mm 4 spindles: 1) horizontal bottom 240mm 5.5kW 2) vertical right 190mm 5.5kW 3) vertical left 190mm 7.5kW 4) horizontal top 240mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 6 pulling and toothed input rollers from above - 2 output, pulling, rubber, smooth rollers from above - from the bottom, a toothed input roller, pulling and turning in the tabletop in front of the first spindle - 2 pulling rollers from the bottom, metal, smooth - 4 side pressures from the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth adjustment of the feed speed on the inverter 6-30m/min - 3kW feed motor - working pressure 8-10bar - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication o ...

CATALOG NO. 7165 TECHNICAL DATA - max width of the processed element 180mm - max height of the processed element 120mm 4 spindles: 1) horizontal bottom 180mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 180mm 5.5kW - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure at the insertion - 6 introducing, pulling and toothed rollers, including 2 double ones - double output, pulling, rubber roller from above - at the bottom, an introducing, pulling, toothed, wide, metal roller - a pulling, metal, smooth roller from the bottom - 2.2kW feed motor - feed on cardan shafts - smooth regulation of feed speed - electric setting of planing thickness - lifting motor 0.75kW - central lubrication of the countertop - length of the introductory tabletop 1580mm - diameter of the exhaust pipe 4x120mm - dimensions length/width/h ...

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

CATALOG NO. 7223 TECHNICAL DATA - max planing width 770mm - max planing height on both sides 200mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - 2 rows of pressure - pulling shaft, toothed - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft from down: - guide strip - introduction table with a divided sliding shaft - introductory tabletop adjustable up/down - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling, adjustable shafts in the back: - 2 side spindles + clamps 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - electric setting of planing thickness - 4 types of feed speeds 6;9;12.5;18 m/min - 2kW feed motor - diameters of the exhaust pipe: 2x120mm, 2x180mm - dimensions length/width/heigh ...

CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...

Dough sheeter and sheeter, combination sheeter, sheeter -Roll width: approx. 600 mm -Unrolling thickness: from 0.3 - 30 mm -with round and long moulder type: SR0 -Meal container -16 A-CEE plug -Connection: 380 V, 0.75 kW -Sheeter is mobile -Dimensions: 1900/1250/H1900 mm -Weight: 430 kg

System: 68/78/88 IV Number of tools: - St. Bore: 50 mm Window tools Oppold IV 68/78/88 wood Window tools Oppold IV 68/78 wood-aluminium ran on Weinig Unicontrol6 with fixed strokes ---------------------------------- (Technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

System: 68/78 IV Number of tools: - St. Bore: 50 mm Oertli window tools IV 68/78 wood IV 68/78 wood-aluminium been in use on Weinig Unicontrol 6 with CNC spindles You are welcome to receive the complete window sections and tool drawings Inquiry The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000                   Number of moulds: 18            Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storag ...

System: 68 IV Number of tools: 29 St. Bore: 50 mm Gold Window Tools IV68 ran on Weinig UC6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RM Group CM 300 multi-processing machine 1.Saw Carriage length 1600mm Cutting height 75mm Scoring Cutter Maximum saw size 250mm Scoring saw 90mm Cutting unit swivelling at an angle of 45 Manual raising and lowering of the saw 2.Spindle moulder Spindle fi 30mm Spindle height 100mm Manual spindle raising and lowering Variable speed on the belt 3500/6000/8000r.p.m 3/4. Thickness planer Working width 300mm Maximum thickness height 220mm 3-knife shaft Traditional knives 5. Drilling and slotting unit Year of production 2014 Weight 530kg CE Certified Power supply: 220V

Four-sided planer Profimat 23 E – German production, WEINIG brand – for 6 heads – technical documentation – universal spindle – odometer reading 7662.7 mth TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm 1 lower spindle 5.5 kW 2 right spindle 3 left spindle 11 kW 4 top spindle 11 kW 5 lower spindle 7.5 kW 6 universal spindle 3600 7.5 kW adjustable spindles spindle diameter 40 mm feed continuously adjustable 5-24 m/min feed motor power 4 kW pneumatic clamp four steel upper pulling rollers three upper pulling rubber rollers rubber roller in the top to pull electric height adjustment tabletop length 2480 mm spigot diameter 140 mm pneumatic lock of the universal head Dimensions 470x190x200 cm weight 2800 kg

SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 10/6100 - CE - min/max length of raw material 150-700 mm - min/max working thickness 18 – 50 mm - min/max working width 40 - 170 mm MILLING UNIT: - n. 2 scoring blades diam. 200 mm (11 kw) - trimming unit diam. 250mm (7.5 kw) - milling unit diam. 250mm (22 kw) PRESS UNIT - min. 3000 max. 6100mm - hydraulic unit motor 4.4kw - cutting unit motor 2.2kw - Volt. 400/50 - overall dimensions 13000x5000x2100h - year 2008

Code: 0239 Brand: SCM Model: D/80 Automatic double end tenoner with 10-groups (5+5) for furniture, doors, window frames, panels, prefabricated panels, tables, cladding, prefabricated houses, fibre cement, plexiglass and various Technical data: Working length mm 3200 Min working length on 1 track mm 75 Min working length on 2 tracks mm 150 Working height mm 180 Adjustable feed speed from 5 to 30 mt/min Heavy cast-iron structure Rubber-coated tracks Track lubrication unit Composition: Automatic scoring unit - Motor Hp 1,5 Hogging unit - Motor Hp 8/12 Automatic Spindle moulder unit - Motor Hp 6,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 5,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 7,5/9 - Rpm 3000/6000 - Shaft diameter mm 40 Overall dimensions for transport: Machine mm 4800 x 2400 x 1700 h + Shoulders (tr ...