weinig moulder used for sale

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

spindle moulder with tilting shaft SAC SUERI TS 145 second hand machine electric shaft inclination -5 ° / + 45 ° electric mast lifting extended plans support extension motor power Hp 7,5 n.5 shaft rotation speed electrical inversion of the direction of rotation shaft diameter mm. 35 volt. 380/50

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

Table dimensions mm: 1000 x 900 With drive system

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg

According to the PDF prospectus!

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

MARTIN T92 automatic roll forming machine with CNC control and 6 frequency-controlled hobic axes Program memory, tool memory, collision protection, diagnostic function, etc. Brand: MARTIN Type: T92 Standardization: CE Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 260 mm (with pendulum axle preparation) Planer thickness: 5 - 180 mm Roll forming depth: max: 40 mm (with suitable tool) Min. product length: 380 mm Operation: CNC control with LCD user interface, for spindle positioning, feed, machining programs, tool data, diagnostics, etc. Storage option of up to 200 profiles and planer dimensions incl. the associated Tool information including all axes of the machine; Storage option for 200 tools incl. reference data; Integrated operating hours counter with total and batch running time;  ...

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...

Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition

Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options

Vacuum pump

Technical details: - Table dimensions (LxWxH): 2,500 x 800 x 890 mm - Max. extension of the additional workpiece support: 400 mm - Built-in spindle diameter: 30 mm - Spindle diameters: 30/35/40/50 mm (not included!) - Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm - Speed display via light-emitting diodes - Max. opening of the work surface (diameter): 380 mm - Diameter of extraction nozzle milling fence: 120 mm - Diameter of suction nozzle under table: 120 mm - Height display for position of the milling spindle in the handwheel - Arc milling stop for curly workpieces with fine adjustment - Table extensions on both sides - Magnetic brake - Adjustable milling fence - Pressure device for milling fence Optional accessory: - Aigner integral stop - Cone spindle M5 - Right-left rotation according to CE standard - 1 x field feeder with right-left rotation and 2 speeds e ...

Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900

Table milling machine DROMA Type FM-4 Machine No. 8301 Built in 1994 Motor power: 5 kW With engine brake Spindle left and right rotation Speeds 3000/4500/6000/9000 rpm Spindle diameter 30 mm Spindle clamping length 150 mm Extraction connection diameter 2x120 mm Milling fence with fine adjustment left and right Table size 1010 mm x 900 mm Front and rear table extensions Dimensions 1 piece 1200 mm x 750 mm, 1 piece 1000 mm x 720 mm Machine weight 700 kg Weight of the table extensions each approx. 20 kg Dimensions Machine 1500 mm x 1200 mm x H 1400 mm With table extensions, total length 3220 mm Loading dimensions 1 pallet 1500 mm x 1200 mm x H 1600 mm Weight approx. 710 kg 1 pallet 1200 mm x 800 mm x 1200 mm, weight approx. 60 kg

Gubisch planer and moulder 172/7 S/N 3425 80 Year of construction 1980 Length of the dressing table 1950 mm Planing width maximum 170 mm Planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.Bottom dressing shaft 7.5 kW 2.Right joining shaft 3.0 kW 3.Left wave 4.0 kW 4.Right shaft 4.0 kW 5.Top Thickness shaft 4.0 kW 6.TopDickenhaft 5.5 kW 7.Uniwelle top / bottom 3.0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1.5 kW Feed speed infinitely variable 5 – 30 m/min. Weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical information subject to reservation

TECHNICAL DATA: Vertical milling machine Tool shank diameter mm: 35 Dimensions of the work table mm: 2400 extendable in width 4 speeds, self-braking Installed capacity KW: 5,5

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)

Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall  ...

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Type 1B/1K-M length of workpiece. 5000 mm workpiece width. 300 mm Quontity of mortising: 180 mm working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 7500 Eur (EXW Jonava, Lithuania)

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

SCM Spindle Moulder Model T150 with Tilting Shaft - spindle moulder shaft inclination -10 / +45 degrees - spindle moulder shaft diameter 35mm - max tool diameter with profile guide 250mm - maximum tool diameter that can be retracted under the table 320mm - "Fast" sector table for optimizing the support of the piece under the tool, adjustable from the outside, as an alternative to the table rings Machine with: Flat "LL" version with 2 profile extensions - length 2500mm, complete with adjustable front support bar for large pieces, and with emergency button Guide and spindle moulder shaft with electronic programming Complete with: - Hanging control panel - total excludability of the guide from the plane - 3-axis microprocessor electronic programmer for automatic programming of the different Positions : spindle moulder height Spindle moulder tilt Positioning gui ...

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Universal machine for elongating wheat doughs, mixed wheat and rye doughs (30% and 70% rye), rye doughs without a rolling table. Technical data: Weight range: 200-2000 gr Machine capacity: up to 2500 pcs/hour at 1000 gr Rounding length: 560 mm Dimensions (L x W x H): 5520x1100x1500 mm Weight, net: 880 kg Connection value: 1.5 KW Advantages: Gentle elongation due to the correct choice of the length of the elongation path, 3-stage dough processing: rolling, rolling, shaping, Low dough fatigue, Modern design, Quick and easy maintenance of the machine, stainless steel housing, Feeding hopper with adjustable opening.

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

Capacity approx. 2000 pcs/h Auction-ID: A7-45702-8

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...