weiler 160 used for sale

Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Height 1400 mm Width 800 mm Length 1850 mm Power supply: 400V 50Hz 3N Total power 17.5 kW Main Material Stainless steel, acid-resistant Loading No loading, it is possible to buy a pillar loading for the machine Throat diameter 160 mm Wolf type: Simple wolf Auger Stuffing Feeding System Hopper Throat Design: Stainless Steel

Pinion Shaft for Poly Clip FCA 160 - NEW Product number 315593 / 193118 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Manufacturer : Meissner Model : SR 160/2 Type : Angle Wolf Dimensions : 1950 x 1500 x 1200 ( mm ) Power supply : 400V 50Hz 3N Power : 28 kW Weight : 1500 kg Throat diameter : 160 ( mm ) Stuffing Serving : Hopper Throat Material: Brass Material : Stainless steel, acid-resistant

Press force max.:: 1600 kN heating plates:: 400 x 400 mm electrically heated:: -- °C heating power:: 9,92 kW piston stroke:: 400 mm no. of stages:: 1 Condition: Used, Specification: Press 400 x 400 mm, second-hand steel frame construction - Clamping force: 160 tonnes - pressure force: 1600 kN - Operating pressure: 300 bar - Closing: from bottom to top - Heating platens: 2 electric platens - Heating power: 4.96 kW/platen - Heating platen dimensions: 400 x 400 mm - Specific pressing pressure: 1000 N/cm² - Distance between the heating platens: 500 mm - Piston stroke: 400 mm - Piston diameter: 260 mm - AC motor power: 7.5 kW - Pneumatic protective cover in the front area, - lifting device - Sliding table - Approx. dimensions: 1,760 x 1,150 mm - System height approx.: 2,470 mm - Weight approx.: kg The data for this ad was cr ...

thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Thermal switch, thermostat regulator, unused orig -Type: 662 029 160 -Number: 6x controller available -Price per piece -Dimensions cardboard: 100/80/H80 mm -Weight: 0.1 kg/pc.

thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Thermal switch, thermostat regulator, unused orig -Type: 662 029 160 -Number: 1x controller available -Price per piece -Dimensions cardboard: 100/80/H80 mm -Weight: 0.1 kg/pc.

Key data: 60 mm, 1600 mm

virgin Solid design, guide tracks on the boom hardened and ground, Stepless speed control, digital speed display Specifications: Drilling capacity max. 60 mm Threading up to M 46 Projection 350 - 1600 mm Vertical movement of the boom 585 mm Drilling head travel (horizontal) 1250 mm Quill stroke 325 mm Tool holder MK 5 Speed range (2) 38 - 275 / 275 - 2000 rpm Feed range (8) 0.06 - 1.00 mm/rev Distance spindle/cube table 165 - 750 mm Distance spindle/base plate 665 - 1250 mm Clamping surface base plate 1740 x 980 mm Cube table 750 x 500 x 500 mm incl. accessories: - Dice table - Drill chuck mandrel MK5 / B16 - Reducing sleeves MK5/4 MK4/3 MK3/2 - LED machine light - Coolant device - Digital speed display - Height-adjustable protective cover - Operating tool - Operating instructions, CE declaration of conformity

Herbold granulator Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP -Stroke: 160mm -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg

Workbench, work table, assembly bench -Workbench: with drawers, solid design -Width: 1600mm -Depth: 710mm -Height: 925mm -Drawers/cabinet doors: lockable / without lock/key, see photos -Weight: 115 kg

x-travel: 1.600 mm y-travel: 1.250 mm z-travel: 1.000 mm Control: HEIDENHAIN iTNC530 Nc rotary table: : surface area: Ø 1.500 x 1.250 mm : 0,001 ° workpiece weight max.: 4.000 kg Universal Milling Head: - B-axis: stufenlos + 180 / - 7 ° resolution: 0,001 ° max. power ED 40 %: 28 kW Speed range, stepless: 20 - 18.000 min-1 feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 15.000 mm/min rapid in X/Y/Z: 60.000 mm/min tool magazine: - Number of tool places: 60 St tool taper: HSK-63 DIN 69893 Form A voltage: 3 x 400 V operating frequency: 50 Hz Overall size: - Space requirement: ca. 8,8 x 8,8 x 3,5 m weight of the machine ca.: 35.000 kg Versatile 5-axis universal machining center with NC – Rotary table, tool magazine and large loading door at the front. • NC-swivelling milling head with 18,000 rpm motor spindle for 5 -axis simultaneous machining • 3D CNC - -Control HEIDENHAIN  ...

Key data: 1400 mm, 1750 mm, 1500 mm

CNC Carousel Lathe with Tool Changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/Retrofit Siemens 828D (retrofit) Face plate diameter: 1,400 mm Face plate loading: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger inlet hole: min. 340 mm Number of plungers: 1 Plunger transverse travel : X 1,900 (+/- 950) mm Plunger perpendicular travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverses: X,Z 8,000 mm/min Transverse beam perpendicular travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm Gear level: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on face plate: max. 40,000 Nm Automatic ...

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 160-4 -V-belt width: 13 mm -Receptacle: Ø 55 mm taper bushing 2517-55 (can be changed) -Quantity: 1x V-belt pulley available -Dimensions: Ø 167 x 65 mm -Weight: 5.8kg

IMEAS grinding cabin RCI/160 - RCS.2T/160 consisting of a lower and an upper satin finishing machine with two rollers.

Grinder Sind 160 mm Model: AG 160 S Holeplate diameter: 160 mm Hopper content: 400 liters Throughput depending on material type, speed, cutting set: 7000 kg/h 2-speed working worm and 3-speed feeding worm – independent Dimensions: 150x165x198cm Electric power: 33 kW Voltage: 380 V, 50 Hz Machine weight: 1600 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 5 grooves type SPA 160x5 2517 -V-belt width: 13 mm -Receptacle: Ø55 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø165 x 80 mm -Weight: 6.3kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor -Gearbox: Type 73F VL-160 L/4 i= 37.63 -Speed: 39 rpm -Engine: Type SK 160L/4 -Power: 15 kW / 1460 rpm -Shaft: Ø 75 x 140 mm -Dimensions: 1060/400/H540 mm -Weight: 279 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Dimensions: 605/315/H400mm -Weight: 121 kg.

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg

Gearbox, spur gear, angle gear, worm gear -Gearbox: Angle gearbox, unfortunately without type designation -Translation: i= 1:1 -Shafts: Ø 16 x 40 mm -Dimensions: 175/160/H80 mm -Weight: 4.6 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KR 160 1/4 -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP44 -Design: B3 -Dimensions: 520/410/H320mm -Weight: 95 kg

Scoring circular saw blade, Scoring circular saw blades -Manufacturer: KBK, circular saw blade type 160x4.1-5.2x30 Z 28 -Carbide tipped -Box dimensions: 260/230/H60 mm -Weight: 1.2 kg

crane block, crane hook, load hook, single hook -Crane hook: load hook with holder -Load capacity: kg -Dimensions: see photos -Dimensions: 490/160/H1090 mm -Own weight: 81 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 29 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.2 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.5 kg

wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: Ø 160 mm -Hole: Ø 60 mm, bolt circle Ø 85 x 9 mm -Number: 2x cutters available -Price: per piece -Dimensions: Ø 160 x 40 mm -Weight: 3.6 kg/piece

hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Formwork nail, formwork nails, strip nails, nail strips, brad nails -Manufacturer: Collated Fasteners, Strip Nails 1 Carton/ 500 Pieces -Type: SNK 1985 5.0 x 160 mm smooth -Price/Fee: complete -Transport dimensions: 260/160/H150 mm Total weight: 12.1 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 160 mm -Piston rod: Ø 50 mm -Dimensions: Ø 75 x 310 mm -Weight: 8 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 160 mm -Piston rod: Ø 40 mm -Dimensions: Ø 75 x 310 mm -Weight: 6.8 kg

Dosing bunker with chain belt discharge Manufacturer: HUBER Fördertechnik Type: RHKG160/8AA Year of Make: 2001 specifications: Machine dimensions: Length: 8,500 mm, Width: 2,400 mm, Height: 2,500 mm Center distance: approx. 8,000 mm Conveyor width: 1,600 mm Side wall height: approx. 1,550 mm Capacity: approx. 20 m³ Drive power: 0.75 kW for the conveyor belt Drive power: 4.0 kW for the dosing station

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 160 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm / M20 -Holes: Ø 25 mm -Dimensions: Ø 70 x 410 mm -Weight: 6.4 kg

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

Log band saw Canali Braun 1600 round timber feed wagon saw roller conveyor year of construction.1994 new control

Complete plant Bogli 1600 round timber feed saw wagon roller conveyor shearer

Electric motor Manufacturer : VEM Model: K21R K21R 160L 4 TWS HW Power: 11 kW NEW, unused from old stock see pictures for more details.

three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 160 M4 -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP54 -Design: B5 -Dimensions: 525/260/H320 mm -Weight: 87 kg.

Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws -Clamping jaws: 2 pieces ground steel jaws width 160 mm -Hole spacing: 100 mm / Ø 11 mm -Shipping/Price: complete -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Palettenheber / Pile Hoists - Stack Lift Baumann NUP 1600 Baujahr / Year 2005 - Serial-No. 52970 Format / Size max. 1500 x 1185mm Hebekapazität / Loading capacity max. 1600KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LA766-4AA60-ZN00 160L -Power: 15 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Dimensions: 590/315/H360 mm -Weight: 83 kg

rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg