weiler 160 used for sale

The machine is in good technical condition, a test run is possible by prior arrangement. Lathe WEILER Praktikant 160 AC Year of Make: 1996 Serial Number: 4057 Circumferential diameter over bed: 320 mm Center width: 650 mm Circumferential diameter over support: 160 mm Spindle bore: 35 mm Speed range: 48 – 2500 rpm Drive power: 4 kW Dimensions (L x W x H): 500 × 1240 × 1550 mm Weight: 680 kg

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 24500 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 80 - 2 Gänge/ : 0.2 - 4 : 200 - 5 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weighing fraesing machine WEILER FHP750, table 750 / 200 mm, 550 / 180 / 400 mm

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Running bezel of a hamlet E110 The bezel is almost unsubstonible

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinder for flaked frozen meat

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Ref. -No.: 10367 Manufacturer: WEILER Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kg Further information: Machine can be inspected under power.

turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: 36 mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Used Weiler meat grinder, model 878 AG.

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UD 24 CNC YOC 1990 Condition: well-maintained Year of Make: 1990 Control: Bosch CC200 Max. turning diameter with jaw chuck: Ø110 mm Max. turning length: 180 mm Bar passage: Ø24 mm Main spindle: 5,000 rpm / 5kW Tool turret: 8-cavity VDI20 W/D/H: 1,830 x 1,435 x 1,625 mm Weight: 1,600 kg Bar feeder: Ø24 x 3,000 mm Bar feeder W/D/H: 4,800 x 900 x 1,300 mm Equipment: - Collet + jaw chuck -Tailstock - IRCO Bar Feeder - Parts catcher - Optics for tool measurement - 8 pieces of VDI mounts

Universal lathe of the Weiler brand suitable for tooling, fixture construction, training and mould making Tip Height : 280mm Speed :48-2500 rpm Tip height : 280 mm Circumferential diameter over bed : 570 mm Circulation diameter over face slide : 340 mm Center width : 1,000 mm Rhqel FULCRUM SHAFT Spindle head DIN 55027/DIN ISO 702-3 : Gr. 8 Spindle bore : 83 mm Spindle diameter in front bearing : 120 mm MAIN DRIVE Drive power 60 %/100 % ED : 15/12 kW Speed range : 1 – 2,500 rpm Number of speeds : infinitely variable FEED RANGE Number : infinitely variable Longitudinal : 0.001 – 10 mm/rev Plan : 0.001 – 10 mm/rev Longitudinal feed force : 10,000 N Feed force plan : 7.000 N Max. longitudinal rapid traverse speed : 6/3 m/min THREADING AREA Metric threads : 0.1 – 400 mm Inch thread : 56 – 1/4 TAILSTOCK Quill ...

Machine type: Lathe - cycle-controlled Manufacturer: WEILER Type E30 Year of manufacture 1991 Weiler control Country of origin Germany Additional information Cycle-controlled lathe HAMLET - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Circumferential diameter over bed 330 mm Circulation diameter max. via face slide 160 mm Slide travel 180 mm Bed slide longitudinal travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 rpm/-1 Drive power - main spindle 9 / 11 kW Max. torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in the vord. Bearing 70 mm Spindle bore 40 mm Usable rod diameter ( - ) mm Tool carrier: Type MultiFix Turning chisel shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock mount MK 3 Feeds: Rapid traverse max. 10 m/min Fee ...

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Siemens 3 T 6 + Siemens Simodrive

turning diameter over bed: 250 mm turning diameter over slide rest: . mm centre distance: ca. 400 mm centre height: ca. 125 mm turning speed range: 80 - 3000 U/min number of speeds: 18 spindle bore: 24 mm tailstock quill taper MT: 3 weight: ca. 400 kg dimensions: ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter: 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws, collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradient Multifix size A with 3 interchangeable holders, chuck protection with shutdown The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Weiler W2 hollow: 280 mm centre height: 440 mm bed width: 320 mm weight of the machine ca.: 200 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 150 mm turning length: 500 mm control: total power requirement: 4 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 165 mm turning length: 800 mm total power requirement: 3 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2 x 1 x 1,5 m No. 1009 Lathe WEILER LZ-300 Speed range 24-2800 1/min. Feed rates 0.013-1.27 mm/min Space requirement approx. 19 0x 700 mm, Weight approx. 700 kg. The e-lead spindle is removed from the machine 3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessories tool cabinet with various accessories. Working area: 165 x 600 Drive: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm turning length: 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,511,5 m No. 5291 1 used lead and feed spindle lathe WEILER Commodor 75 GS working range: Ø 380/190 x 1000 mm drive: 7,5 kW digital display spindle bore 56 mm Speed range 13 - 2000 min-1 3-jaw chuck Multifix B Chip tray documentation Space requirement approx. 2.5 x 1 x 1.5 Weight approx. 1700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: WEILER C3 turning dia. over bed: 330 mm centre height: 165 mm centre distance: 750 mm turning dia. over face-slide: 160 mm spindle bore: 40.5 mm spindle taper: 55027/5 spindle turning speed - stepless: 1-4500 U/min tailstock quill taper MT: 3 dia. of quill: 50 mm quill stroke: 130 mm feed - longitudinal/cross: 0.001-10 mm/min dimensions of the machine ca.: 2000 x 1300 x 1700 mmxmmxmm weight: 1600 kg 3-jaw-chuck diameter: 160 mm make: FORKKARDT quick change tool holder:: MULTIFIX type: B numbers of toolholders: 6 coolant: misc. accessories: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: WEILER turning diameter over bed: 410 mm centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 200 mm spindle bore: 54 mm spindle taper ISO: 55027/6 spindle turning speed - stepless: 4-3000 U/min tailstock quill taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm feed - longitudinal/cross: 0-20 mm/min rapid traverse longitudinal and cross: 10/5 m/min spindle drive: 9/13 kW dimensions of machine: 2300x1200x1800 mm weight: 2.0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 800 mm turning speed range: 26 - 2000 U/min spindle bore: 24 mm total power requirement: 0,8 / 1,6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,60 0,70 1,20 m 1. Hand - School Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter: 720 mm turning length: 3000 mm centre height: 360 mm spindle bore: 106 mm turning speed range: 1 - 1800 U/min tailstock quill taper MT: 6 workpiece weight max.: 3800 kg total power requirement: 36 kW weight of the machine ca.: 6100 kg dimensions of the machine ca.: 4800 x 2450 x 2000 mm CNC lathe - cycle controlled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weiler 1612 Frozen Block Grinder Heavy duty grinder

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip spla ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet do ...

turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. - machine video - https://www.youtube.com/watch?v=zCGu4i6V5dM Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder -  ...