weiler 160 used for sale

Austrian vehicle documents, 80 km/h registration Auction-ID: A1-45690-1

Chip extraction FELDER RL 160 built in 2014, 3.0 kW 400 V, max. 3,200 m³/h, dead weight approx. 290 kg, S/N 310500814

Forklift tine extension approx. 160x14b cm (1 pair)

Desk wood décor light approx. 160b cm, base anthracite, integrated LED design lamp

Sauna bench wood approx. 160b cm

Concerns 5 concrete block molds for \"lego\" blocks 160x80x80 cm, 3 pieces per mold. Auction-ID: A1-40134-262

Concerns 1 concrete block mold for \"lego\" blocks 160x80x80 cm, 4 pieces per mold. Includes steel underlay! Auction-ID: A1-40134-264

Equipped with 4-Cil. Diesel engine; hydraulic quick coupler; CW30 connection; additional hydraulic function; Auction-ID: A1-40134-86

A deposit of €250.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-5

Concerns 6 concrete block molds for \"lego\" blocks 160x80x80 cm, 3 pieces per mold. Auction-ID: A1-40134-260

Equipped with: air brakes, Belgian registration, 7-pin plug, 3 double-acting valve, 1 free return, tow bar, Martin Folger front linkage Cat3, lighting, wheelbase 289 cm, length 442 cm, height 289 cm, weight 6730 kg, rear lifting capacity 6651 kg, independent PTO 540/1000, 8.1-liter 6-cylinder turbo diesel engine, 160 hp / 120 kW, 4WD (Dual Traction), Auction-ID: A1-40134-16

Modern ergonomic design, powder-coated steel frame (corrosion-resistant and robust), high-quality materials (stainless steel combined with double-walled rotomoulded polyethylene, impact and scratch resistant), double lance holder, large rear wheels, height-adjustable push handle (100–110 cm), easy-to-store power cable, radial high-pressure pump with 3 all-ceramic plungers and stainless steel valves (low-vibration and noise-reducing), electric motor with low speed approx. 1450 rpm, automatic start/stop system with delayed switch-off, pressure gauge, coarse dirt filter, pressure regulating valve, detergent injector, operating pressure 30–160 bar, water flow rate approx. 180–1200 l/h, maximum water temperature 40 °C, output approx. 7 kW, voltage 3x 400 V, hose length 10 m, cord length approx. 5 m, dimensions approx. 765 x 530 x 1100 mm, weight approx. 77 kg Auction-ID: A1-40134-296

Concerns 4 concrete block molds for \"lego\" blocks 160x80x40 cm, 3 pieces per mold. Auction-ID: A1-40134-261

Equipped with 6-Cil. \"FIAT\" diesel engine; 160 hp; mechanical transmission; mechanical forward/reverse; 4 gear groups can be shifted 4 times each; PTO: 540/1000 rpm; 3 double-acting hydraulic valves; air system; adjustable tow bar; original \"Fiat\" wheel weights (rear 300 kg / front 80 kg); original \"Fiat\" front weights 10 pieces of 40kg each; roof hatch; front window can be opened; Auction-ID: A1-40134-21

Sliding door wall cabinet approx. 160 cm, intermediate shelf

Concerns 6 concrete block molds for \"lego\" blocks 160x80x80 cm, 3 pieces per mold. PLEASE NOTE, Lot is also part of Combination Lot 265! Auction-ID: A1-40134-259

Concerns 1 concrete block mold for \"lego\" blocks 160x80x40 cm, 4 pieces per mold. Includes steel underlay! PLEASE NOTE, Lot is also part of Combination Lot 265! Auction-ID: A1-40134-263

Motor 1200 W, hydraulic motor 1200 W, battery 24 V, with rotator for lifting and tilting, adjustable forks Auction-ID: A1-45682-4

Office furniture light grey 2 desks each 160x80 cm, horizontal blind cabinet approx. 100x200 cm, sideboard, 2 swivel chairs, mobile pedestal, household refrigerator

Temperature control unit GWK TECO CS 160 built in 2006, S/N 16035, internal No. 27

Scrubbing machine ULSONI Topclean 1600 built in 2024, 79 kg, S/N 442224060094, 230V 50Hz

In stock on pallet, total dimensions approx. 1200x800x880 mm Auction-ID: A1-45790-569

Plastic injection moulding machine DEMAG Extra 160-430 built in 2005 66,081 Bh (02/24), international size 1600-430, clamping force 1,600 kN, displacement max. 231 cm³, screw 40 mm, clamping plates 770 x 770 mm, opening travel max. 585/685 mm, weight 6,320 kg, control Demag NC4, cascade control, 8 registers, linear robot Demag DR721-65952400, device no. W721-0302, Travel X/Y/Z - 550/1,200/2,000 mm, tie bar width 520, injection unit 430, series 4.1, mesh no. 7896-1098, weight 6.5 t, S/N 200034, internal machine 107, plus suction conveyor PIOVAN, 2 belt conveyor belts MTF 3,000x600 mm, plus 1 more

Charger 80V Ah with REMA battery plug and 16A wall plug Loading onto trucks no problem Auction-ID: A1-45450-3538

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3682

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3681

Equipment: Heatable/coolable, Insulation,Condition: used,Volume: 160,000,Lower shelf: Cone floor,Design: upright,Stand shape: Standing frame,Heating/cooling (filter bar): available,Max. permissible Operating temperature : 15,Temperature control cylinder: Thermoplate,Insulation: available,Material insulating jacket: aluminium,Insulation thickness: 50,Diameter inside: 3.900,Cylindrical height: 13.000,Total height: 16.000,Technical documentation: Drawing,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Last use: Food / dairy,Material in contact with the product: V4A

Equipped with air suspension, equipped with German papers. Auction-ID: A1-42014-153

Equipped with 380V connection, manual, control box. Auction-ID: A1-40135-268

Grundfos water pump type: DNP 50-160/146 A-F-A-BBUE Grundfos water pump, specifically from the DNP series. This type of pump is often used for industrial applications such as water supply, irrigation, or pressure boosting. Technical Specifications pump: Type: DNP 50-160/146 A-F-A-BBUE Model: A47060064-P1-9806 Flow rate: 50m3 p/hour Head: 25 m Speed: 2900 rpm Maximum pressure: 10 bar at max. 140°C 16 bar at max. 100°C Engine specifications: Type: MG 132SB2-38FF265-C2 Power: 5.50 kW Speed: 2890-2910 rpm Voltage: 380-415 V Frequency: 50 Hz IP55 (dust and splash proof) Auction-ID: A1-41993-109

Equipped with: 3-point connection, hydraulic connections, support legs. Auction-ID: A1-40135-183

Package of 160 Triple Rhombus Oak planks, including 23 bags of mounting brackets + screws and 32 pieces of start/end profiles; Unused in packaging. Length: 290 centimeters Width: 20.5 centimeters Working width: 19.5 centimeters Auction-ID: A1-40135-292

round meeting table high-quality as good as new 160cm diameter Auction-ID: A1-45889-2770

Stair treads multiplex 30mm 1130mm wide 14x 310mm and 14x 160mm, 14x aluminium angle 20/20/2 Adjustable boards made of MDF white Auction-ID: A1-45889-2863

Auction-ID: A1-45889-2844

Auction-ID: A1-45889-170

Auction-ID: A1-45889-2969

White lacquered white bridge table with plexiglass insert (10cm wide) and footstay Auction-ID: A1-45889-457

Zarges aluminium box Used condition 3 closures 4 handles Mounted on pallet Prepared for completion Auction-ID: A1-45889-868

Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Translated with

Forklift slots; unused; 5890 Auction-ID: A1-45901-167

Forklift slots; unused; 5890 Auction-ID: A1-45901-166

Slide size 1600x1300 mm Slide stroke 900 mm Opening between the posts 1400 mm Worktop size 1600x1300 mm Max mold size 1600x1300 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-13

New Steel construction 8 m x 20 m Galvanized steel Side column 4 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Z-profiles for the roof/walls and fastening bolts, screws, and nuts are not included. Auction-ID: A1-45756-9

Slide size 850x600 mm Slide stroke 14-180 mm Strokes per minute 40 Min height between table and slide 500 mm Worktop size 1300x800 mm Revamping of the electrical system 2007 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-9

ROBOTIC ARM ABB IRB 1600 6/1.45 Wrist load 6 kg Maximum reach 1450 mm Repeatability +/- 0.02 mm ABB IRBP R300 POSITIONER Max load capacity 300 kg Max rolling diameter 1000 mm Distance between tailstocks 1600 mm WELDING POWER SOURCE FRONIUS TPS 500i Max welding current 500A Operating voltage 14.2 - 39.0 V Frequency 50 / 60 Hz Max power 480 kVA WIRE FEEDER FRONIUS WF 25i R Wire speed 1 - 25 m/min Wire diameter 0.8 - 1.6 mm 4 rollers Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-20

Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Run-time travel: 0.06 s Table dimensions: approx. 200 x 160 mm with pneumatic punching tool mounted Auction-ID: A7-46287-220

Machine number: 2-0538 Compressive force: 28 kN Stroke: 12 Table dimensions: approx. 200 x 160 mm incl. installed punching tool Auction-ID: A7-46287-205

Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-197

Siemens SINAMICS G150SC industrial frequency inverter in cabinet, designed for demanding industrial applications (pumps, fans, conveyors, production machines). ✔️ Key features: Brand: Siemens Series: SINAMICS G150 Model: G150SC (Single Circuit) Power: 160 kW Voltage: 400 V Type: In-cabinet frequency inverter Year: 2024 Condition: New / never put into service ✔️ Configuration / options: Single Circuit Options: D14, D58, L00, L08, M06, M90, T58 Suitable for heavy industrial applications ✔️ Advantages: Siemens reliability Energy optimization Precise motor control Wide industrial compatibility Auction-ID: A3-43519-38050