126,720 used machines on RESALE, but how to find them? Machine Search
not working - battery discharged Auction-ID: A7-45452-185
FT-1600 Serial Number : FS417148 Trailer 1600kg 2000mmx1250mmx300mm https://foresteel.eu/product/ft-1600-tipping-trailer/ Auction-ID: A3-43520-5009
drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;
drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;
Please note! The available forklift cannot load this machine, please bring your own suitable resources
drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;
drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;
drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;
Automatic cooling system Drilling capacity 35 mm, drilling depth 210 mm Adhesive force 16000 N Speed up to N = 830 rpm Power 1600 kW in case Unused
Machine number: 2-0095 Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Delay travel: 0.06 s Table dimensions: approx. 190 x 150 mm with pneumatic punching tool mounted
Automatic cooling system Drilling capacity 35 mm, drilling depth 210 mm Adhesive force 16000 N Speed up to N = 830 rpm Power 1600 kW in case Unused
Automatic cooling system Drilling capacity 35 mm, drilling depth 210 mm Adhesive force 16000 N Speed up to N = 830 rpm Power 1600 kW in case Unused
drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;
Automatic cooling system Drilling capacity 35 mm, drilling depth 210 mm Adhesive force 16000 N Speed up to N = 830 rpm Power 1600 kW in case Unused
Eccentric shaft by drawing K04.038.842-22-402 for hot stamping press K04.038.842 (K8542), 1600T brand new in state stale from stock W 4675 kg
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026
HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED
Nabertherm High Temperature Furnace 1600 °C The high-temperature furnaces HT 04/16 - HT 450/18 have proven themselves for many years in the laboratory and for production. Whether for quartz glass, glass-ceramics, the sintering of CIM components or other processes up to With a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction in a compact free-standing model, these high-temperature furnaces are suitable for processes in the laboratory where maximum precision is required. Excellent temperature uniformity and sensible details set unsurpassable quality standards. Tmax 1600 °C Double-walled housing construction with fan cooling, resulting in low outer wall temperature Heating from both sides via molybdenum disilicide heating elements High-quality fibre insulation with special rear i ...
Tool steel, round material, shaft sectionShaft, steel block, shaft sawnCold work tool steel 1.2842Material section 400 mm x length 165 mmNet weight: approx. 160 kgMaterial number: 1.2842Material abbreviation: 90MnCrV8Cold-work tool steel with high hardness acceptance and good dimensional stability during hardeningApplication in toolmaking for cutting, punching and embossing tools.Rollers and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HBug strength in delivery condition: 770
Equipment: heatable/coolable, insulation, agitator,condition: used,volume: 16,000,design: upright,base shape: feet,number of feet: 4,heating/cooling (filter bar): available,temperature control cylinder: double jacket,temperature control underbody: double jacket,insulation: available,insulating jacket: hermetically welded,material insulating jacket: stainless steel,diameter inside: 2,400,cylindrical height: 3,550,total height: 6,000,manhole / dome: in the upper floor,nameplate: no,equipment: Venting, crane eyelets,Outlet: available,Outlet : 50,Remarks: Double jacket with trickle ring - only for non-pressurized
Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg
DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit -Type: 102680-13-24 -Voltage: 24 V -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg
Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg
Drawing line Composed of Lifting platform with scale SAMPSISTEMI BD 250 A reel handling unit Drawing machine SAMPSISTEMI RC 150 / MT 160 6A year 2017 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-649
Very good spiral mixer KEMPER, type: SPL 100 -completely overhauled- - for 100 kg flour or 160 kg dough - completely overhauled - New bearings, rhymes, time clocks, painting - with center rod - 2 speeds in forward or reverse gear - Machine kmplett overhauled, as good as new, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.
Distance between the clamps 470x470 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 900 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Attention! Pick up by appointment Auction-ID: A1-43992-18
Fliegl PFW 16000 – Slurry tanker 16,000 l with dribble hose distributor General data • Machine type: Slurry tanker • Manufacturer: Fliegl Agrartechnik GmbH • Model: PFW 16000 • Year of construction: 2019 • Capacity: 16,000 l • Permissible Total weight: 23,000 kg • Condition: used Technical equipment • Tandem axle • Air brake system • Tyres: 750/60 R 30.5 • Hydraulic drawbar suspension • Suction connection 6\" left and right with automatic hydraulic shut-off • 4,000 l Armatec pump • Drag hose distributor \"Skate 150\" • Working width: 15 m • Distributor with half-side switch • Piano controls available Condition • Optical condition: used, usual signs of wear present • Technical condition: functional • Ready to use Powerful slurry tanker with modern spreading technology and high efficiency – ideal for efficien ...
Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Handover: in its current condition as inspected -Speed control: Cover damaged, handwheel missing (see photos) -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg
Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg
KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3
with large MDF board with a thickness of 22 mm Load capacity: up to 120 kg Functions: Offers numerous clamping options and mounting options for stationary devices. Auction-ID: A1-45495-296
Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5) Auction-ID: A1-45681-874
Please note! The available forklift cannot load this machine, please bring your own suitable resources Auction-ID: A1-45188-1
Trolley 160 / 250 G with packaging material, 1 trolley with content food packaging PP approx. 1550 transparent cups 160 / 250 G with approx. 2000 lids 160 DG Auction-ID: A7-45675-42
Austrian vehicle documents, 80 km/h registration Auction-ID: A1-45690-1
maximum number of results exceeded
please refine your search
450 € 
