we used for sale

Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 93 Positionen weight: 320 kg condition: neu : 28 mm dimensions: 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 102 Positionen weight: 320 kg condition: neu : 28 mm dimensions: 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 80 Positionen weight: 150 kg condition: neu : 28 mm dimensions: 0,8 x 0,6 x ,05 m Special 80-piece set, 28mm system Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weigher - Dough Divider Daub Slim 1700 Cylinder and piston made of high-quality stainless steel Teflon-coated stainless steel tank with safety cover Output max. 1,100 pieces per hour only DGUV V3 tested by us Electronic variable speed and piece counter Connection 400V, 1.6 kW, 16A-CEE plug Used machine

WP Kemper V 100 Dough Divider - Weigher Product description Manufacturer: WP Emil Kemper GmbH Type: V 100 Condition: used, functional, bakery condition - please clean thoroughly before use Year of construction: 03/2013 Large plastic funnel on wheels, mobile Connected load: 3 kW / 400 V / 50 Hz / 3 PH External dimensions: W.: 73 cm, D.: 172 cm, H.: 161 cm Details see pictures.

Shovel Aluminium ALU Weigh Bucket Flour Shovel 290 mm( 2 pieces )Aluminium die-cast polishedTotal length approx. 290 mm375mlWeight approx. 184 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Shovel Aluminium ALU Weigh-in Bucket Flour Shovel 265 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 265 mm285mlWeight approx. 120 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Shovel Aluminium ALU Weigh scoop Flour scoop 250 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 250 mm250mlWeight approx. 98 gATTENTION: Aluminium is not dishwasher safe! Details see picture

One used complete mesh ( standard, special and engineered mesh ) for sale, exesting of: One used JAGER SCHLATTER Superflex mesh welding line: The Superflex system processes all materials used in the reinforcing mesh industry and offers maximum design freedom with the programmable mesh linear extension. The system is equipped with motorized, infinitely adjustable compact welding groups that automatically adapt to the geometry of the next mesh. This feature enables seamless transitions and quick adaptation to changing production requirements. Variable cross wire spacings can be precisely implemented, making the system ideal for the production of list and special mesh. This versatility gives companies a clear advantage in the reinforcing mesh market and enables economical production with a high degree of flexibility. One used Progress MSR2 straightening/cutting machine is a high- ...

Model: ER600 Condition: Refurbished Serial Number: 109 Stock Number: 3323 Belt width: 600 mm Fully overhauled, including new controls. Belt speed: 1.5 - 15 m/min Filling level: minimal 15 litres Power: 3 x 380V, 50Hz, 0.61kW Dimensions: 1400 x 900 x 1750 mm Weight: 145 kg

A complete longitudinal beam welding system (vehicle carrier) Merkle with a tack welding station, a cooling station and a longitudinal beam welding machine is available. Beam height range: 70mm-500mm, max. beam length: 13700mm, flange width: 120mm/150mm, flange thickness range: 5mm-20mm, web plate thickness range: 3mm-10mm, clear width: 85mm-500mm, web offset at 15° transition: 50mm. 1) Welding system, track length: 20m, rotating device: 0°-45°, total clamping and tack welding range: 14300mm, guide spacing: 500mm, roller conveyor height: 800mm, welding process: MIG/MAG-Pulse-Arc, travel speed: 6m/min, vertical stroke: 800mm, horizontal stroke: 2x270mm, power sources: 2x HighPulse 550 RS, torch: MSB 400W. 2) Tack welding device, tack welding position: 45°, max. changeover time: 10min. 3) Transport and cooling line, tack welding area roller conveyor length: 15000mm, buffer and cooling  ...

85 x 210 x 150 cm

wire diameter 1,5-6,5 mm working width 850 mm line wire distance 20-60 mm distance of cross wire 10-100 mm

crimped mesh assembly loom, autom. weft wire fee wire diameter - automatic 1,0-6,0 mm mesh width - automatic 10-60 mm working width 2.000 mm wefts per min. 30

Inv. Num. : 9039 Type: QIROX QRC 350 Producer: CLOOS Created: 2017 Parameters: Control System: V6-9 Advanced Maximum arm reach: 3400 mm Maximum load capacity: 15 kg The workstation consists of 3 stations and the following components: CLOOS QIROX QRC 350 robot Track Optical barrier Workpiece Positioner

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimension: 1300/570/H900 mm -Weight: 262kg

Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, V-flange -Welding flange: DIN 2633 - PN16 -Type: PN16 DN250 / 267 C22.8 34526/1 GER. -Inside diameter: 255 mm -Hole circle O: 355/26 mm -Price per piece -Quantity: 1 pieces -Welding flange: other sizes in stock are available on request -Dimensions: O 405 / H67 mm -Weight: 17 kg

Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Three jaw chuck: Ø 200 mm -Speed: 1/8 to 2 1/4 rpm -Direction of rotation: right/left rotation -Tip height: 535 mm -Dimensions: 925/1100/H700 mm -Weight 188 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -max. welding power: 320 A -4-roller drive -Water cooled -Wire feed: separate, mobile -Accessories: hose package, ground cable, gas fitting -also suitable for robots -Quantity: 1x piece available -Dimensions: 1155/500/H1030 mm -Weight: 263 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Artec, TIG welding machine -Cooling: Water-cooled -Type: TIG 235 i DC -Welding current: max. 225 A -incl.: ground cable, throttle valve, hose assembly -Dimensions: 880/430/H645 mm -Weight: 87 kg

TIG welding machine, welding machine, TIG welding machine -TIG welding machine: AC direct current -Hose package: 1 -with accessories: gas nozzles, needles, mixing nozzles, ceramic nozzle shells ... -Max. Welding power: 220 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 870/455/H665 mm -Weight: 112 kg

Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources -Three-phase rectifiers for: MMA DC welding -Welding power: max. 350 A -Welding cable with: electrode clamp -Ground cable -Number: 2x welding machines available -Price: per piece -Dimensions: 500/620/H835 mm -Weight: 126 kg

Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device -Table: is tiltable -Maximum load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm -Drive: 0.1 kW -Speed: RPM -Quantity: 1x welding rotator available -Price: per piece -Dimensions: 830/450/H920 mm -Weight: 174 kg

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

TIG welding rod, welding wire Stainless, IK-resistant (wet corrosion up to 350 °C). Corrosion-resistant like similar low-carbon and stabilized austenitic 18/8 CrNi (N) steels/cast steel grades. Cold toughness down to -196 °C. Connections and surfacing of similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Connections and surfacing on cold-tough matching/similar austenitic CrNi (N) steels/cast steel grades. -net weight: 5 kg -Number: 2x package available -Price: per package -Weight complete: 5.2 kg/package

TIG welding rod, welding wire Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, turn-tilt tables positioning device -Table: is tiltable 360° -Clamping diameter: 850 mm -Drive: 3.5 kW -Dimensions: 4000/1480/H1350 mm -Own weight: 2880 kg

Spot welder, spot welding machine, spot welding machine, spot welding tongs, spot welding machine, projection welding machine, projection welding machine -Manufacturer: Aro, projection welding machine, spot welding machine, water-cooled, type N601 -Welding power: 65 kVA -Welding control: Aro 25-002-2 -Transport dimensions: 1000/510/H1720 mm -Weight: 538 kg

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: Kistler, tiltable welding turntable with mobile base - Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8m/min at Ø 400 mm - Direction of rotation: right/left rotation -Number: 1x available -Total dimensions: 740/580/H630 mm -Weight: 145kg

Welding inverter, welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier, welding machine, welding inverter -Manufacturer: Kjellberg, Electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable with electrode clamp -ground cable -Dimensions: 560/290/H500 mm -Weight: 44 kg

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Welding fume filter, welding fume extraction, flexible extraction arm, welding fume extraction -Handover in the actual condition as seen -Welding fume extraction: with articulated extraction arm -Extraction fan: Brook Crompton 0.75 kW -extraction arm: total length 3880mm -Inlet connection: Ø 170/160 mm, outlet Ø 150 mm -Number: 1x suction available -Price per piece -Transport dimension: 1900/800/H560 mm -Weight: approx. 67 kg/pc.

Welding fume filter, welding fume extraction, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, filter system, filter block -Manufacturer: Fischer Umwelttechnik, filter block exhaust air purification system type 4600 -Rated power: 2.2 kW -Individual components: see photos -Dimensions: 910/750/H2250 mm -Total weight: 226 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Jäckle, water-cooled TIG welding machine -Type: TIG 301i DC -Welding power: max. 300 A, see nameplate -Cooling device: KG 2 -Accessories: including ground cable, hose package -Dimension: 730/620/H1180 mm -Weight: 73kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Manufacturer: Commercy Soudure, welding rotating device swiveling -Type: PM 250 -Load capacity: see photo nameplate -Control: with foot pedal -Three-jaw chuck: Ø 314 mm, bore Ø 100 mm, base plate Ø 600 mm -Speed: max. 3 rpm right/left rotation -tiltable: via crank -Transport dimensions: 1190/720/H900 mm -Total weight: 267 kg

Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp bottom, weld reducers -Weld reducers/clapper bases: 108 pieces -Type: 34 different versions, see photos / parts list -Price/Sale: complete -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/800/H200 mm -Weight: 148 kg

Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding elbow, pipe angle, welding T-piece, welding fitting, welding T-piece -Weld T-pieces: 139 pieces -Type: 30 various versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H400 mm -Weight: 315 kg

Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp bottom, weld reducers -Reducers: Welding reducers 245 pieces -Type: 80 different versions, see photos / parts list -Price/Sale: complete -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/800/H410 mm -Weight: 401 kg

Flange connection, V-flange, pipe flange -Pipe flanges/welding neck flanges: 81 pieces -Type: DIN EN1092-1 16 different versions see photos / parts list -Material: P235 GH -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H200 mm -Weight: 467 kg

Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Standard base for welding table, table base, table base for welding tableWelding and assembly tables -Manufacturer: Demmeler, standard foot for welding table 2 pieces -Type: 3-D -Pendulum feet: finely adjustable -Mounting countersunk screw: M24 -Price/Delivery: complete -Total dimensions: Ø 90 / 635 mm -Weight: 8.1 kg/piece

Standard foot for welding table, table foot, table foot for welding table welding and assembly tables, support foot -Standard foot: Support foot for welding and assembly tables -Height: finely adjustable -Quantity: 20x table base available -Price per piece -Total dimensions: 670/100/100 mm -Weight: 7.6 kg/piece

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction, flue gas extraction torch -MIG/MAG hose package: with welding fume extraction -Length: 4.3 m -water cooled -Quantity: 2x hose package available -Price per piece -Transport dimensions: 600/500/H110 mm / 600/540/H130 mm -Weight: 5.2 kg/piece

container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Handover: in current condition as viewed -Condition: without drive motors / control, see photos -Welding rotating device: pivoting -Turntable: Ø 700 mm -Projection: 930 mm -Transport dimensions: 1240/730/H1640 mm -Weight: 643 kg

Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg